Raw Materials for Refractory:China Calcined Bauxite for Cement Industry - Lowest Market Price CNBM
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 11 m.t
- Supply Capability:
- 11111111 m.t/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Structure of Calcined Bauxite Description
Bauxite (aluminous soil; Bauxite) is also called the alumina or bauxite, main ingredients are alumina, hydrated alumina containing impurities, is an earthy mineral. White or gray, brown and yellow or light red by iron. From 4 to 3.9 g/cm3 density, hardness, 1 ~ 3 is not transparent, very brittle. Very difficult to melt. Insoluble in water, soluble in sulfuric acid, sodium hydroxide solution. Mainly used for aluminium, refractory material.
2.Main Features of the Calcined Bauxite
Calcined bauxite is one of the principal ore of aluminum. Calcined bauxite contains hydrous aluminum oxides and aluminum
hydroxides, formed through the laterization of aluminous rocks in tropical and subtropical areas .Calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85OC to 1600C) .This removes moisture there.By increasing the alumina content,compared to an alumina content of about 57%to 58% in raw bauxite, calcined bauxite has an alumina content of 84%to88%.The heating is carried out in rotary kilns.
3.Main usage of the Calcined Bauxite
(1) aluminium industry. Used in national defense, aerospace, automotive, electronics, chemical industry, daily necessities, etc.
(2) precision casting. Alumina clinker made after the mould precision casting processed into fine powder. Used in military industry, aerospace, communications, instrumentation, machinery and medical equipment department.
(3) is used for refractory products. High bauxite clinker refractoriness is as high as 1780, chemical stability strong, and good physical properties.
(4) aluminum silicate refractory fiber. With light weight, high temperature resistance, good thermal stability, low thermal conductivity, heat capacity is small and the advantages of resistance to mechanical shock. Used in iron and steel, nonferrous metallurgy, electronics, petroleum, chemical, aerospace, atomic energy, defense and other industries.
(5) in magnesia and bauxite clinker as raw materials, add the appropriate binder, used for pouring ladle whole ladle lining has particularly good effects.
(6) manufacture alumina cement, abrasive materials, ceramic industry and chemical industry can be aluminum of various compound.
4. Calcined Bauxite Images
5. Calcined Bauxite Specification
Product Code | Al2O3 % | Fe2O3 % | Bulk/Density g /cm3 | Water absorption % | Moisture % |
SP-A | ≥88 | ≤1.8 | ≥3.15 | ≤4 | ≤0.2 |
SP-B | ≥85 | ≤2.0 | ≥3.10 | ≤4 | |
SP-C | ≥80 | ≤2.5 | ≥2.90 | ≤5 | |
SP-D | 70-80 | ≤2.5 | ≥2.75 | ≤5 | |
SP-E | ≥60 | ≤3.0 | ≥2.65 | ≤6 | |
The discretionary reduction of all fine powder should be no more than 0.5% | |||||
6.FAQ of Calcined Bauxite
1). Q: Are you a factory or trading company?
A: We are a factory.
2). Q: Where is your factory located? How can I visit there?
A: Our factory is located in ShanXi, HeNan, China. You are warmly welcomed to visit us!
3). Q: How can I get some samples?
A: Please connect me for samples
4). Q: Can the price be cheaper?
A: Of course, you will be offered a good discount for big amount.
- Q: Who know what kind of fire shutter fire rating are there?
- Fire resistance rating of the building elements is different due to the different requirements of the construction . Fire proof door can be divided into Serie A, B and C in terms of fire endurance limit, fire resisting limit are not should be less than 1.20h, 0.90h and 0.60h. That is, if the fire resistance rating is two, also it is possible to use a class a fire door. Hope my answer will help you.
- Q: what's the seal of fireproofing material?
- Folded organic putty takes organic material as bond,it has certain flexibility or plasticity while using, and it's products are thick liquid or cement shaped object. Folded WXY-II is powered?solid that takes inorganic materials as main components, it has certain workability while used with admixture. Folded fire retardant bag is the packaged object made by fireproofing material, and it's suitable for fireproofing seal of larger openings or fire separation of cable?bridge(fire retardant bag also refers to fireproof bag) Folded fire retardant module is the solid made by fireproofing material with certain shape and size, and it is easy for cutting and drilling, suitable for fireproofing seal of opening and cable?bridge. Folded seal board is made by fireproofing material, it's easy for cutting and drilling, suitable for fireproofing seal of large opening. Folded foam seal is a kind of fireproofing material that can automatically expand and foam and sealed by opening after injecting the foam into opening. Folded sealing strip is a product or flexibility coiled material mede by fireproofing material with certain geometry shape. Folded sealing gum is a kind of liquid fireproofing material that has a function of fireproofing and sealing. Folded fire retardant bag is soft and windable tape-shaped product made by fireproofing material, it is winded on the external surface of plastic pipe and fixed with steel belt or other proper methods, it's the expansion, squeezing and softening pipe after contacting with fire, opening left by burning or soften of seal plastic pipe. Folded fire retardant ring is the product made by fireproofing material and metal shell, it's covered on the external surface of the plastic pipe, expanding and sealing after contacing with open fire, the opening left by burning and soften of plastic pipe when it passes through the opening of wall and floor.
- Q: What are the characteristics of magnesium fireproof plate
- Fire Excellence: Glass magnesium plate is non combustible plate having good fire-resisitance quality. Flame will never burn continuously on it. It does not catch on fire when temperature reach 800 ℃, and will not be lit up at 1200 ℃. The plate, having high-quality keel partition system, is rated as the highest non-combustible level A1 with fire resistance being above 3 hours. It absorbs a lot of heat when fire is burning, delaying rise of ambient temperature. Waterproof and moisture proof: Glass magnesium plate functions steadily whenever weather is dry and cold or humid and damp, not influenced by condensed water drop and moist air. Even air dried after soaked in water for a few days, no deformation, it will not go out of shape, turn soft, or absorb moisture After testing, the board has no water permeability. Light weight and seismic resistance: Low overall plate density of 0.8-1.2g/cm3 reduces the building's load, and the weight of building interior wall by over 60%, and increases the use area by 5-8%. Its lightweight is conducive to anti-seismic, can effectively reduce main cost of foundation and structure. Superior strength: Magnesite has special 5.1.8 phase covered fiberglass cloth and good toughness of plant fiber. Altough glass magnesium fireproof plate is light, it has tight structure, good stability, wood-like toughness, outstanding performance in impact resistance, compressive strength, tensile strength equal rigidity and toughness, with flexural strength up to 322kgf\cm2 (vertical) and 216kgf\cm2 (level of) as well as impact strength of 25MPa.
- Q: What's the definition of fire endurance of the fire-resistant coating for steel structure?
- 1. Fire endurance. Conduct fire resistance test of any building component according to the standard time-temperature curve, and the time when it is subjected to the fire to the time when it loses support capability or fire insulation function or its integrality is destroyed is referred to fire endurance. 2. Steel has relatively low fire endurance which is usually 0.25h only, namely 15 minutes; 3. Of steel structure buildings, steel can be used as beams, pillars, etc. but its fire endurance is not enough (usually these components have higher requirement on fire endurance, and take pillar as an example, it is usually demanded that the fire endurance should be 2-3h), and under this condition, it needs to brush fire retardant coating so as to raise the fire endurance. As to the specific quantity or types of the fire retardant coating, it is decided upon the actual conditions. In short, the building material needs to meet the required fire endurance of the buildings.
- Q: Who knows about the criteria of fireproof and thermal insulation materials?
- The standards of fireproof and thermal insulation material. 1. the height of buildings is greater than or equal to 100 m, the combustion performance of thermal insulation materials should be A-level; 2. the height of buildings is greater than or equal 60 m but less than 100 m, the combustion performance of thermal insulation materials should be no less than B2-level. When using B2-level thermal insulation materials, fire barrier zone should be set in each floor; 3. the height of buildings is greater than or equal to 24 m but less than 60 m, the combustion performance of thermal insulation materials should be no less than B2-level. When using B2-level thermal insulation materials, fire barrier zone should be set in every two floors; 4, the height of buildings is less than 24 m, the combustion performance of thermal insulation materials should be no less than B2-level. When using B2-level thermal insulation materials, fire barrier zone should be set in every three floors.
- Q: What is the classification standard of fireproofing material levels?
- Standard: Class A: Incombustible building material, almost without burning. class A1: Non-combustible, no open flame,class A2: Non-combustible,it needs to measure smoke and be qualified. Class B1: Nonflammable building material: Nonflammable materials have good flame resistance function. when it contacts open fire or is under high temperature, it's difficult to burn and be spreading rapidly, and will stop burn after removing the combustion?source. Class B2: Combustible?building?materials: Combustible materials have good flame resistance function. when it contacts open fire or is put in the air at high temperature, it will immediately burst into flames, and easily result in the spreading of fire, such as wooden column, timber roof truss, timber beam, wooden stairs, etc. Class B3: Inflammability building materials, without any flame resisting effects, easy to burn, and has large danger of fire disaster.
- Q: What are fireproofing materials?
- 1. With the tape made by double-coated flame-retardant and chemical defense surface adhesive and that only occurs charring with no melting drops and maintains good strength when meeting with fire as main material, and by the laminating-sewing-pasting process, clothing body and gloves are made and equipped with flame retardant, chemical defence, voltage resistant, and puncture resistant boots, the clothing assembly is constituted. 2. They are usually asbestos. Some of them have better quality and are made by wiredrawing of aluminum zirconium and silicon mixtures, and of course others are directly manufactured with some natural objects. 3. All the panels that meet the first-order fire protection requirements can be fireproofing materials. Like gypsum boards, aluminum sheets and so on. Coatings are usually those with fine powder, high density and good sealing. 4. Phenolic foam board can meet the requirement and its test temperature can reach up to 2000℃ under which it has no molten droplet but good integrality. Thermal Conductivity: 0.03W/(mk). It is non-flammable, non-toxic and smokeless! 5. The hollow ceramic micro-bead is good in thermal insulation and fire-retardance.
- Q: What is the fire endurance of fireproof glass cotton?
- The highest temperature of fireproofing glass wool can be above 200 degrees, so it can be used for a long time,it's difficult to judge the special usage time, but its usually about 3 months and 8 hours every day.
- Q: Where do China and foreign countries do more refractory materials?
- Zhengzhou Xinde yuan Refractories Co., the company's products have high alumina brick, clay brick, light insulating brick, wear-resistant pouring material, corundum castable, low cement castable with high strength, impervious material, material, plastic, and self shaping of various grades of cement and unshaped refractory materials. For different industries have antistripping high alumina brick, brick, alkali phosphate brick used in cement industry, boiler industry with various grades of wear-resistant brick, corundum brick, mullite brick and other forming material. Companies adhere to the "product quality for life, enterprise integrity as the foundation", in the fierce market competition, has won the trust and praise of many users. Refractory products are sold throughout the country and exported to Vietnam, India, South Korea, Pakistan, Iran and other Southeast Asian countries and regions.Companies adhering to the "quality first, reputation first, customer first" to the management of physical science, strong technical force, perfect detection means, advanced process equipment, stable product quality as the quality guarantee.
- Q: What are the differences between thermal?insulation?material and refractory?
- Just as its name implies, Thermal insulation means that it doesn't conduct heat instead it insulates heat inside, while refractory means resistance to high temperature and it will not be out of shape or damaged due to high temperature.
Send your message to us
Raw Materials for Refractory:China Calcined Bauxite for Cement Industry - Lowest Market Price CNBM
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 11 m.t
- Supply Capability:
- 11111111 m.t/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
