PVC Pressure Pipe Resist Chemical Matters
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
- Q: High pressure hose K type joints KJR32 and KJR31.5D what is the difference between ah, please give us a answer,
- K type joint has the distinction between national standard and German standard. In general, 32 and 38 tubes are used more often. The joints used on 32 of the tubes are KJR32 and KJR31.5D. 38. The joints used on the tubes are KJR38 and KJR B40
- Q: What is the method of making large diameter rubber joint?
- Rubber joint also known as shock absorber, shock absorber throat, the main function is to shock absorption, noise reduction, protection of the pipeline, compensation pipeline expansion, cold caused by displacement.Its structure: both ends are two carbon steel flanges, the middle is rubber shock absorption part.
- Q: What is a rubber core pulling method?
- The hose shall be filled with water or gas at a pressure of 0.5 0.8N / mm before pouring concrete. At this point, the hose diameter can be increased by about 3mm. When pouring concrete, the vibrating bar should not touch the hose, and should check the pressure of the water meter regularly. If there is any change, the pressure must be filled.Smoke tube longer than tube core pulling slightly later. Before the pipe is pumped, the water is lowered and the pipe section is reduced, and the pipe can be drawn away from the concrete. The order of pumping is usually first, then first, then first, then straight.
- Q: Method for inserting glass tube into rubber tube when assembling instrument
- Pipe connection is widely used in the laboratory. Besides the sleeve of the glass tube, there are plastic tube, rubber hose and iron pipe sleeve, etc. the sleeve connection method can be carried out by referring to the sleeve connection method of the glass tube.
- Q: Can the rubber hose for the LPG cooker and gas cooker be general?
- Whether the gas stove is the use of natural gas or liquefied gas, artificial gas, all can use the rubber tube, need to pay attention to is the pipe diameter and gas stove pipe diameter should be consistent, but also to the fixed ring frame with rubber tube, rubber tube is also too long existing problem of aging time, while the gas is there is a certain danger, recommend regular replacement of rubber tube
- Q: What is the principle of communicating devices? What if the rubber tube is used as a connecting device to change the water for the fish?
- Siphon principle: that is the principle of connected devices, plus in a closed container, the pressure on the liquid, everywhere equal. The siphon is filled with water, there is no gas, the water level of the water inlet is high, and the water outlet is closed with palm or other objects. The pressure is equal everywhere. When all are arranged, the water outlet is opened, although the atmospheric pressure on both sides is equal, the water level at the water inlet end is high and the pressure is large, and the water inflow is continuously flowed out of the water outlet.
- Q: The rubber is sheathed on a metal cylinder. How should they be connected?
- If you describe it, it is recommended that a soft binder such as 704 silicone gel will be used to prevent shock absorption and separation. Metal surface to rust treatment, clean can be coated adhesive, rubber cover surface is best polished, degreasing treatment effect is good!
- Q: What's the cause of a default like a general rubber product?
- It's aging of rubberAging refers to the polymer materials (including rubber, plastics, fiber and so on) in the processing, storage and use of the process, due to the comprehensive effect of internal and external factors, its performance gradually deteriorated, resulting in the final loss of use value.
- Q: Acid burette and how to distinguish the basic buret
- Alkali: rubber tubes. Acids: glass tubes (remember: NaOH and glass reactions. So rubber)
- Q: What are the types of metal hose couplings?
- DGJ jointStructure and characteristics:DGJ self fixing metal hose joint, it can connect non threaded steel pipe or screw free equipment outlet and hose, and save the thread setting process;The metal joint is made of zinc alloy. The surface is zinc plated, sanded or chrome plated. The structure is compact and the strength is high. The steel pipe and the metal hose are connected reliably, and the appearance is beautiful;The metal joint is self - fixing and is used to connect the metal hose to the non - threaded steel pipe or the screw - free equipment outlet;Suitable metal hose: JS, JSH, JSB, JSHG;Adaptation: steel thin steel wire pipe, black, tin pipe (water, gas);When choosing the DGJ self fixing metal hose joint, please pay attention to the specification and size of the connecting pipe hose.
Send your message to us
PVC Pressure Pipe Resist Chemical Matters
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
