PVC Pressure Pipe 1.25MPa, 1.6MPa on Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
- Q: What's the metal hose for fire fighting?
- Corrosion resistance, high temperature resistance, low temperature resistance (-196, ~+420), light weight, small size, good flexibility. Widely used in aviation, aerospace, petroleum, chemical, metallurgy, power, paper making, timber, textiles, construction, medicine, food, tobacco, transportation and other industries.1 、 flexible metal hose between flexible hose, bending radius is small.2 、 metal hose has better flexibility, no obstruction or stiffness.3 、 metal hose unit light weight, caliber consistency is good.4 、 flexible metal hose, repeated bending and flexibility.
- Q: The rubber is sheathed on a metal cylinder. How should they be connected?
- With the combination of metal rubber is coated with adhesive before production and rubber vulcanization shaping, you can use this temporary experiment 502 geliahao for glue or adhesive, but the disadvantages of this thing with winter is not strong, the metal surface must be clean
- Q: How to detect the reliability of rubber hose
- Low temperature bending test at low temperature: hose clamp on rigid torsion wheel diameter hose diameter 12 times, for 6 hours at a low temperature, twisted 180 degrees within 12s when the measured torque and the standard temperature measured torque ratio. Low temperature bending: hose clamped in the diameter of the hose within 12 times the torsion wheel, parked at low temperatures for 24 hours, in the 10s to reverse 180 degrees, check whether or not the internal and external plastic brittle fracture and damage. Test of low temperature brittleness measurement hose is the most simple specimen should be bent 90 degrees at low temperature, or a hose after freezing compressed 1/2 to see whether the embrittlement, another method is to use a certain weight of the heavy hammer falls freely, to see if the specimen embrittlement impact specimen.
- Q: What are the matters that should be paid attention to when installing rubber hose joint in water pump?
- Installation notes:?1, Shanghai rubber pipe joint non super displacement limit at the time of installation;?, 2 installation bolts to be symmetric, gradually tightening pressure, to prevent local leakage;?3, flat, suspended, vertical installation of rubber pipe joint, actual axial displacement pressure rubber tube joints should be smaller than the pipe support, otherwise should install anti pull off device to prevent work pressure;?4, rubber pipe joints should be away from heat, ozone, no strong radiation light. Exposure and use of media that do not meet the requirements of the product;?5, rubber pipe joint in the transportation, loading and unloading, installation, no sharp instruments across the surface of the sealing surface;
- Q: What is the difference between plastic lined steel pipe and rubber lined steel pipe?
- Difference1. processing technology:Rubber lined steel pipe generally adopts the manual adhesive, vulcanizing process (can also be cold bonding operation); plastic lining pipe generally adopts the heating equipment, the overall rotational (tight loose lining, lining, molding, molding) main process steps can be completed by means of equipment. Therefore, the production efficiency of the lining pipe is obviously higher than that of the lining rubber tube.2.: the physical properties of rubber lined pipe due to the inheritance of the excellent properties of rubber, the chemical corrosion and wear resistance, heat resistance is also very prominent, and the plastic lined pipe in addition to resistance to chemical corrosion and lining hose close to the outside, in the wear resistance, heat resistance and adhesive strength are not as lining hose.
- Q: What is a hose valve?
- Hose valve structure is simple, easy to overhaul and replace rubber hose, with a multi-purpose valve, hose valve can also replace the gate valve, stop valve, control valve use. Manual hose valve cold resistance and good wear resistance, according to the needs of chemical production users, using a variety of recipes produced.
- Q: High pressure hose crimping connector, pressed on what position can effectively prevent the head off?
- The amount of compression in the joint core or material needs to be improved. If the joint can not be changed, can try to head off premise, reduce the withholding amount, to avoid excessive damage to the hose wire crimping.
- Q: How to make sure the rubber hose will not be worn off?
- The sole judgment is as follows at the end of the rubber bottom or tendon tendon end methods: look at the color, color is usually translucent, while the rubber bottom is not.
- Q: The pipe of the gas water heater is buried in the wall. It is made of nylon tube and rubber tube. Is it possible to use rubber tube?
- After so many years of consulting, you are the first to ask the hose through the wall. In real life, there are many hoses that go through walls.
- Q: What's the smell of petrol in the car and the trunk?! Especially after a long drive!
- Have changed the gasoline pump, or because of the failure to disassemble the steam pump owners, if the car appeared gasoline, do not panic, this is because after the disassembly and assembly, the residue is not cleaned up. In fact, this situation is usually not met, the gasoline pump replacement cycle is 100 thousand kilometers. But now the gasoline filter is also installed in the tank, connected with the gasoline pump, and its replacement cycle is shorter, 40 thousand km, when the replacement of gasoline pump disassembly. In this case, just look at the gasoline pump installed is not correct, in cleaning the perimeter can be.
Send your message to us
PVC Pressure Pipe 1.25MPa, 1.6MPa on Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
