PVC Pressure Pipe 0.63-1.6MPa Made in China
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:How to prevent leakage of rubber joint check valve?
- As the valve body is particularly flexible, to ensure maximum resistance to back pressure at the same time to minimize water head, and some only one centimeter water head can be opened, so that the valve emissions and back resistance to achieve a perfect unity.
- Q:What are the types of cable metal hose connections?
- It is mainly used for connecting the box and hose in place. Open the box in the box and plug into the joint. The external thread joint is fixed with the lock.
- Q:How to determine the tensile strength of GB rubber joint?
- The tensile strength of adhesive joints that can resist the ultimate capacity rubber tensile failure, tensile test piece refers to fracture when the unit section of the load, also known as tensile strength, tensile strength, unit MPa (MPa). Tensile strength is generally used as the main physical and mechanical standard in rubber joint industry.
- Q:How can the soft joint of the pipe be elongated during use?
- Solution: the pipeline on the pipeline joint soft products need to increase to prevent stretch device (anti rato limiter), can limit the pipeline effectively soft joint work in the normal length, effectively ensure the service life and the effect of the product. Recommended products: KXT type reinforced pipe soft joint.
- Q:How to distinguish the true and false corrosion resistant rubber soft joint?
- Method for distinguishing true and false corrosion resistant rubber soft joint:Put the rubber joint in the corrosive liquid which needs to pass. One day, 24h can see that the swelling ratio is not more than 5%!
- Q:What is the essential difference between rubber expansion joint and rubber joint?
- Rubber joint is a kind of pipe joint with high elasticity, high air tightness, medium resistance and weather resistance. The product uses rubber elasticity, high air tightness, medium resistance, weather resistance and radiation resistance etc., using polyester cord fabric skew high strength, strong stability and the hot and cold composite, after high pressure, mold temperature and curing. As the rubber joint has good comprehensive performance, it mainly acts as shock absorption, noise elimination and noise reduction. Therefore, it is widely used in chemical, construction, water supply, drainage, petroleum, light and heavy industries, freezing, sanitation, plumbing, fire fighting, power and other infrastructure projects.
- Q:What is the high and low pressure circuit of diesel engine?
- Low pressure oil circuit is the oil circuit from the tank to the diesel pump. The negative pressure is in the oil circuit, and the oil is drawn out with the diesel oil pump and is sucked into the diesel pump to pressurize. It's obvious that all the oil lines are rubber lines.
- Q:Carbon dioxide gas shielded welding torch wire feed hose joint, that steel wire can not be drawn out, how to solve it, with welding?
- Replaceable welding wire feeding tube wire feeding tube can be directly removed, if not directly pull out, it may be the welding current and wire melting welding in together, there may be a wire feeding tube after the corrosion resistance increases to pull out, encountered such a situation like a gun only;
- Q:The selection of valves and fittings has the following requirements
- The selection of hose inner screw thread joint can be rotated, because not hose and the joint body can rotate freely after buckling, configuration of internal thread after disassembly for hose.
- Q:Why can the air conditioning connection be made of copper tube? How about rubber tube and aluminium pipe? Please heroes pointing for the dishes.
- In fact, aluminum can, such as the refrigerator evaporator is aluminum, not only with the hose, the hardness is not enough in fact even the refrigerator either with brass or aluminum, for a long time or leakage, so you can not use the hose. The aluminum tube in the fridge is the easiest place to leak
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PVC Pressure Pipe 0.63-1.6MPa Made in China
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords