PVC Pipe with 110MM 16-630mm Diameter on Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
- Q:Natural gas can be connected to a gas cooker. Can rubber tube be used?
- No, it's not safe. To purchase national standards products with 3C certification.
- Q:What happened to the soft rubber flat?
- Rubber soft joint is a common rubber telescopic device". The inner pressure of the pipe or the equipment, because of the decrease of temperature or the venting of the vertical section, causes the internal negative pressure.
- Q:What are the properties of an oil resistant rubber hose?
- The performance of the extended product is accompanied by a rubber hose in life in many areas already occupy a crucial position, which makes the hose detection is important, especially for the rubber pipe detecting water, oil and gas and other purposes.
- Q:HDPE double wall corrugated pipe joint shall be made of elastic sealing rubber ring and socket joint interface. What are the requirements for rubber ring joint?
- The interface method should be carried out according to the following procedures: DN400 pipeline and below, by a man with a cotton rope hook is installed pipe socket, the other one with a long lever oblique insertion based cross baffle against the tube end of the center position, and then forced the tube slowly into after the installation of HDPE double wall corrugated pipe the pipe socket to a predetermined position; more than two sets of DN400 pipeline by hand hoist will pull in pipe section. When the interface is closed, the spanner on both sides of the pipe section shall be pulled synchronously, so that the rubber sealing ring is properly positioned and is not distorted or not falling off.
- Q:The difference between silicone tube and PVC tube
- Silicone hose is also a kind of rubber tube, resistant to oil and heat. Because of the different types of rubber rubber pipe has many applications, commonly used rubber tube material EPDM, CR, VMQ, FKM, IIR, ACM, AEM, common structure with single, double, multilayer, enhanced, non enhanced etc..Silicone hose is the biggest feature of resistance to temperature changes of -60 degrees to 250 degrees, but the cost is very expensive, PVC is often used as ordinary water pipes, temperature sensitive, cheap and delicious, suitable for general working environment, no requirement for hoses. Compression resistant silicone hose can also withstand pressure, PVC in general, depends on the wall thickness and caliber. These are the differences between the silicone tube and the PVC tube.
- Q:What is the essential difference between silicone tube and rubber tube?
- Silicone tube 100% non-toxic, tasteless, fine silk, silicone silicone tube (article), high pressure resistant silicone tube, silicone tube, gear shaped sealing strip, shaped article, food grade (non-toxic) silicone tube (article), medical silicone tube, silicone tube, silicone tube medicinal woven (used for conveying working pressure, liquid food, pharmaceutical and biological products. ) medical silicone pipe joint, silica gel sealing tube, flame retardant tube (strip), silica gel foamed pipe (strip), high temperature resistant silicon rubber tube, performance: cold resistance, high temperature resistance. Harmless non-toxic and tasteless; suitable for small household appliances (coffee pot, kettle, electric iron, electric cooker, frying pan, disinfection cabinet, drinking machine, pulp machine, bread machine, gas cooker, water heater) and electronic, automobile, medical and other mechanical products.
- Q:The small hose attached to the grease gun is coarse or fine at the joint
- The small hose attached to the grease gun is threaded with fine thread. Usually M10X1 or Rp1/8.
- Q:Which is safer for stainless steel bellows and rubber tubes for gas pipelines?
- Stainless steel bellows, installation is simple and quick. Because the elasticity of the stainless steel bellows is good, only two special tools can be bent in hand during the operation, and no joints can be arranged in the wall or the decorative layer when buried, which reduces the risk of leakage.
- Q:Production process and raw material of rubber
- Raw materials: all kinds of rubber, rubber compounding agent, as well as the fiber and metal skeleton materials.
- Q:The main features of Linatex rubber tube or what are the characteristics?
- The types and characteristics of Linatex rubber tube:Linatex:95% pure natural rubber is made of fresh latex and processed by liquid phase process. Excellent resistance to wet grinding, super elongation, high strength, resilience and tensile strength.Linard 60: silicon reinforced natural rubber, with high wear resistance, high resilience, cutting resistance, tear resistance and so on.Linatrile: silicone reinforced rubber. It has the properties of wear resistance, oil resistance, aging resistance, fatigue resistance and good air tightness.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
PVC Pipe with 110MM 16-630mm Diameter on Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
