PVC pipe with 110MM Made in China on Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
2.Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q: What do you mean by "DN" on hydraulic hose?
- DN stands for nominal diameter. The standard diameter after standardization, the midpoint between the inner diameter and the outer diameter, in units mm.
- Q: Hydraulic hose joint dimensions
- Press joint standards; hydraulic pipe fittings - screw thread. A standard two; classification; 1. screw internal and external threads two; 2.; according to the tooth shape can be divided into: 1) 2) 3 triangular thread trapezoidal thread; according to the 3. line number single thread and multi thread;; 4. by rotation in the direction of the left and right screw screw two, right standard; 5. by use of different points are: with the common thread, metric thread sealing pipe; two. 1. common metric screw threads; metric screw thread with a capital M, tooth type angle 2 DEG =60; 2. metric screw thread according to pitch
- Q: Can the rubber hose for the LPG cooker and gas cooker be general?
- Whether the gas stove is the use of natural gas or liquefied gas, artificial gas, all can use the rubber tube, need to pay attention to is the pipe diameter and gas stove pipe diameter should be consistent, but also to the fixed ring frame with rubber tube, rubber tube is also too long existing problem of aging time, while the gas is there is a certain danger, recommend regular replacement of rubber tube
- Q: What is the difference between plastic lined steel pipe and rubber lined steel pipe?
- Difference1. processing technology:Rubber lined steel pipe generally adopts the manual adhesive, vulcanizing process (can also be cold bonding operation); plastic lining pipe generally adopts the heating equipment, the overall rotational (tight loose lining, lining, molding, molding) main process steps can be completed by means of equipment. Therefore, the production efficiency of the lining pipe is obviously higher than that of the lining rubber tube.2.: the physical properties of rubber lined pipe due to the inheritance of the excellent properties of rubber, the chemical corrosion and wear resistance, heat resistance is also very prominent, and the plastic lined pipe in addition to resistance to chemical corrosion and lining hose close to the outside, in the wear resistance, heat resistance and adhesive strength are not as lining hose.
- Q: Which is safer for stainless steel bellows and rubber tubes for gas pipelines?
- Stainless steel bellows, installation is simple and quick. Because the elasticity of the stainless steel bellows is good, only two special tools can be bent in hand during the operation, and no joints can be arranged in the wall or the decorative layer when buried, which reduces the risk of leakage.
- Q: Hydraulic hose joint configuration
- Strong uplift: hose connector is composed of a core tube and sheathed and clamped together with the sleeve, the sleeve is divided into two sections, the first section length is less than second and greater than the outer diameter of section second; the core tube is divided into two sections, the first section is the second section is the joint oil, rubber press section; the core pipe and the sleeve rubber press section cooperation is divided into three parts. The first part is a locking part, the second part is the part of the third part is the steel wire buckle, rubber press sealing parts; in the first part, the outer surface of the core pipe has a clamping groove, the sleeve surface along the circumferential direction with a snap ring matched; in the second part, the core tube the outer surface of a step and a groove, the inner surface of the sleeve ring a match; in the third part, the outer surface of the core pipe is provided with at least two corrugated groove, the sleeve surface is provided with at least two teeth groove. The utility model is used for the steel wire woven hose made of inner rubber layer, steel wire layer and outer rubber layer, and has the advantages of excellent pull proof performance, long service life and good sealing performance.
- Q: What are the types of hose connectors?
- Joint classification of common are: expansion joints, quick couplings, withhold joints, removable fittings, compression fittings, flared joint is in welded joints.
- Q: Three yuan ethylene propylene rubber joint (high temperature resistant rubber joint) can withstand high temperature
- High temperature rubber joint adopts three yuan ethylene propylene rubber processing, can withstand high temperature 140 degrees, if need higher temperature, need to use fluorine rubber, the highest temperature can reach 200 degrees!
- Q: How can the tightness of rubber tube and metal pipe joint be ensured?
- To see what kind of material hose, small 1MM~2MM, if the inner pressure then add hoop.
- Q: How much is a gas hose a metre? At least 1 meters, 5 safe?
- 1, liquefied petroleum gas will soften the ordinary rubber tube, please use special rubber tube.2, often check and clean hose, found aging, cracking, burn, rat worm bite marks, should be replaced immediately. It is recommended that the hose be replaced in two years under normal conditions.3, gas hose length of not more than 2 meters, after passing the place is not allowed to have electrical appliances.4, hose do not close to the stove surface, so as not to be flame barbecue.5, the hose does not cross the wall, doors and windows.6, do not press or fold the hose, so as not to plug, affecting the continuous gas supply.At the interface, and appliance, 7 hose valve, please use the pipe truss, to prevent the shedding of leakage.
Send your message to us
PVC pipe with 110MM Made in China on Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
