Plastic Tubes PVC Pipe Colors Wall Thickness:1.6mm-26.7mm Specification:16-630mm Length:5.8/11.8m Standard:GB
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m
- Supply Capability:
- 9999 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q: How are plastic tubes cleaned?
- Plastic tubes can be cleaned by using warm soapy water or a mild detergent solution. They should be rinsed thoroughly with clean water to remove any residue. It is important to avoid using harsh chemicals, abrasive scrubbers, or high temperatures that could damage the plastic.
- Q: Are plastic tubes resistant to ultraviolet light?
- Yes, plastic tubes can be resistant to ultraviolet light depending on the type of plastic used. Some plastics, such as polyvinyl chloride (PVC) and polyethylene, are inherently resistant to UV radiation. However, other plastics may require additives like UV stabilizers to enhance their resistance to ultraviolet light.
- Q: My son had ear tubes inserted about two years ago. I have always used drops in his ears and cleaned them, etc. Sometimes I would look in them with a flashlight to make sure they were ok and not leaking, (When you get an ear infection with tubes, your ears drain some). Today I was doing just that with a flashlight and I actually saw the tubes in both ears..I never noticed this before and I am a VERY observant mother. Could this mean they are getting loose or close to falling out?? Or is it just that I never noticed before. I did try to see them when he first got the tubes, but I never could. Today, out of nowhere I could see these white plastic tubes?? He has been very cranky and irritable, but can't seem to pinpoint where he isn't feeling well. Does losing your tubes (if that is what it is) cause some discomfort?? I imagine it would...anything involving your ears doesn't feel very good. Any medical professionals or experienced parents with any good thoughts???
- i strongly suggest to bring him to his ENT doctor. have it checked.. you can only visualize it through an otoscope and not a flashlight. if you can see it something might be wrong. so have it checked now
- Q: i have an amp installation kit, with a 0 gauge power wire, i'm assuming since there is no split loom tubing that came with the complete kit, that it will be unnecessary because the power wire is so thick?
- I'd protect it further - Especially if it goes thru sheet metal or outside the passenger compartment. I've run power feed wire thru plastic tubing, when it is under the body, just to be safe.
- Q: Are plastic tubes safe for food packaging?
- Yes, plastic tubes can be safe for food packaging. However, it is essential to ensure that the plastic used is food-grade and meets the necessary safety standards. Additionally, proper quality control measures and regulations must be followed during the manufacturing process to ensure the safety and integrity of the food being packaged.
- Q: Can plastic tubes be used for food packaging?
- Yes, plastic tubes can be used for food packaging. Plastic tubes are commonly used in various forms of food packaging, such as squeezable condiments, toothpaste, and even snack foods like chips. They provide a convenient and hygienic way to store and dispense food products while ensuring product safety and extending shelf life.
- Q: There are so many plastic tubes in the beer brewing process, and the cleaner that comes with the kit is not good enough. I was wondering if anyone has any good tips or tricks.
- Do not use bleach! The flavor leaches into the plastic and goes back into the beer. Use some B-Brite, available at your LHBS.
- Q: Are plastic tubes suitable for storing chemicals?
- Plastic tubes can be suitable for storing certain chemicals depending on the type of plastic and the specific chemical being stored.
- Q: I remember when I was a kid my mother had a bunch of different cake decorating tubes in various colors and I'm pretty sure she still has them - and may use them, lol! OK, maybe I'm exaggerating a bit, but seriously, how long can I keep and use those little plastic squirt tubes of colored icing that you use to decorate cakes and cookies - realistically? Thanks!
- If you don't know when they were purchased, toss them out and get new ones.
- Q: After extruding the plastic pipe, why is it not soaking, cooling, spraying cooling?
- No, because the extruded pipe after pipe through vacuum sizing and cooling set has been basically finalized, will not appear out of the pit to save water and electricity, spray cooling, full immersion cooling is the main post, when your products quickly is not spray cooling, can full immersion, but to control the temperature,
Send your message to us
Plastic Tubes PVC Pipe Colors Wall Thickness:1.6mm-26.7mm Specification:16-630mm Length:5.8/11.8m Standard:GB
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m
- Supply Capability:
- 9999 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords