Precast Concrete Small Hollow Core Slab Extrusion Equipment
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 5 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Precast Concrete Small Hollow Core Slab Extrusion Equipment
1. Precast Concrete Small Hollow Core Slab Extrusion Equipment:
The machine uses hydraulic lifting system, easy to revolve. It can reduce labor intensity and improve production efficiency. Machine body adopts anti-rust technology. Key parts, like hopper are welded by stainless steel. Wearing parts like reamers, side form, vibration board, stock guide and other parts are all welded with alloy. Both sides of the wall panels can put reinforcement wires, diameter can reach 6mm. Work area is orbital or no orbital.
According to the specialty of the local materials, we provide matching method to insure customer produce standard panels (general materials: fly ash, slag, ceramsite, cinders, cinerite, pumice, vermiculite and so on). Reduce the overall cost of building, increase indoor usable space.
High production efficiency, annual output square meters above 150000m.
2. Main Features of Precast Concrete Small Hollow Core Slab Extrusion Equipment:
• One machine can make one slab lower cost, high Wear-resistant, long service life.
• In case of quality problem the company provide free replacement.
• Provide technical support for free.
• Simple structure, easy operate, less wear parts
3. Precast Concrete Small Hollow Core Slab Extrusion Equipment Images:
4. Precast Concrete Small Hollow Core Slab Extrusion Equipment Specification:
Type | Aperture & diameter | Number and diameter of wires | Max span | Total power | Productivity (m/min) | Max. Load (KN/m2) | Overall dimension (mm) | Weight (kg) |
GLY180-1200 | 11/ peach | 12/9.5or12.7 | 9 | 18.5 | 1.1-1.3 | 16.16 | 2900X1500x1200 | 3300 |
GLY200-1200 | 8 /peach | 10/9.5or12.7 | 10 | 22 | 1.1-1.3 | 13.22 | 3700X1550X1550 | 5300 |
GLY250-1200 | 8/ peach | 10/12.7 | 12.6 | 33 | 1.1-1.3 | 11.1 | 3700X1550X1500 | 6200 |
GLY300-1200 | 6 /peach | 8/12.7 | 15 | 40 | 1.1-1.3 | 10.83 | 3700X1550X1500 | 6900 |
GLY380-1200 | 8 /rhomb | 8/12.7 | 18 | 39.2 | 0.8-1.0 | 12.27 | 4600X1850X1600 | 7500 |
Production Process
Rebar tensioning
Raw materials preparing
Molding
Our customers
5. Packing & Delivery
• Wire cables are used for fastening the machine on the trailer or inside the container.
• Machine covered with plastic film.
• Machines can be packed in tarpaulin or wooden case according to customer’s needs.
6. FAQ:
We have organized several common questions for our clients, may help you sincerely：
• What information we need to confirm with you before send a formal offer？
What kind of slab you want to make, wall panel, roof panel, lintel or something else?
Do you have exact slab size (slab thickness and width)? If not, please tell us the slab span, we will give you suggestion.
• What kind of machine do you have?
Our main products: large span GLY concrete hollow core slab machine, light - weight wall panel machine, lintel machine, column machine, hollow core slab cutting machine, concrete feeding dumper, high-strength steel wire tensioning machine, which amount to more than the types and more than four hundred standards. We can provide the whole plan and technology supporting for concrete precast component.
7. Our Service:
• We supply the technical supporting all the time.
• We supply one year warranty for whole machine.
• We supply free quick wear parts.
• We supply low charge continue maintenance when warranty is expired.
• We supply free training to end-users
- Q: Does it have all the details of the threading section? I used Machinery's Handbook for drawings to determine tap sizes, thread dimensions etc for technical drawings. I hate to buy the book again (I lost it in a flood) for the one chapter I really need. Does anyone know if it includes those tables?
- rmatc4 okorder /
- Q: Jan. 1 Retired a piece of machinery that was purchased on January 1, 2001.The machine cost$62,000 on that date. It had a useful life of 10 years with no salvage value.June 30 Sold a computer that was purchased on January 1, 2008.The computer cost $40,000. Ithad a useful life of 5 years with no salvage value.The computer was sold for $14,000.Dec. 31 Discarded a delivery truck that was purchased on January 1, 2007. The truck cost$39,000. It was depreciated based on a 6-year useful life with a $3,000 salvage value.InstructionsJournalize all entries required on the above dates, including entries to update depreciation,where applicable, on assets disposed of. Ingles Company uses straight-line depreciation. (Assumedepreciation is up to date as of December 31, 2010.)
- Interesting arguments, but I am not 100%
- Q: Teflon rod material in the mechanical processing how to get the surface smoothness and clean surface
- ?In the mechanical processing to pay attention to the requirements of four aspects: processing PTFE requires a sharp tool sharpening, it can not use carbide cutting tools, because the carbide cutter can not sharpen the sharp; second can not add coolant ; The third must have a reasonable speed (through the test); the last point to have a reasonable knife depth and feed (through the test). The surface roughness problem solves the problem that the surface must be clean.
- Q: Such as in terms of construction equipment like a crane, what is the maximum amount of weight that can be lifted by any existing machine?
- A crane's limitation is defined as metre-tonnes, because it is the moment that creates the limitation of the crane lift. A crane does the same amount of work to lift 50 tonnes at 10 metres as it does to lift 100 tonnes at 5 metres. That being said; I believe the largest single lift was perfromed by one of forty-two Lampson Tranis Lift IIs in Corpus Christi TX. The actual load was 1000 tonnes. And this just happens to be a MOBILE unit, on top of everything else!
- Q: Looking at their lists of duties, it seems MR's are machinists, and MM's repair machines/pipes, etc.
- MR What they do The duties performed by MRs include: ? repairing and operating auxiliary machinery; ? calculating time and material needed for machine shop work and the repairing of auxiliary machinery; ? drawing sketches and preparing specifications for replacement parts; ? working from sketches and specifications to produce replacement parts; ? operating machine shop equipment, such as lathes, drill presses, shapers, bench grinders, milling machines, boring mills, power hacksaws and computer numerically controlled machinery; ? working with precision measuring instruments such as micrometers, depth gauges, verniers, calipers, gauge blocks, protractors and dial indicators; ? engraving metal and other materials; ? performing electroplating and flame spraying operations. --------------------------------------... MM What They Do The duties performed by MMs include: ? aligning piping systems for oil, water, air and steam, and controlling the operation of ship boilers and steam turbines used for ship propulsion and service systems; ? controlling operation of turbo generators used to produce electrical power; ? cleaning, adjusting, testing and performing other preventive maintenance on a ship's boilers, main engines, turbo generators and other auxiliary machinery including steering engines, elevators, winches, pumps and associated valves; ? operating and maintaining desalinization plants (distilling plants) to make fresh water from sea water; ? maintaining refrigeration plants, air conditioning systems and galley equipment; ? repairing or replacing valves, pumps, heat exchangers, compressors, steam turbines and hydraulic or pneumatic control devices; ? making entries in and analyzing machinery operating records and reports. --------------------------------------... You should be able to see the difference in primary duties.
- Q: where can i get the list sugar plant machinery with the details & market value?
- Ask Dole Pineapple or look on the US Dept Us Agriculture website or google
- Q: Can the shears machine be processed?
- According to the classification of materials can be cut: metal sheet, non-ferrous metal sheet; with a certain strength and toughness of non-metallic materials such as plastics, polyurethane and so on.
- Q: On October 1, 2007, Machinery B was acquired with a down payment of $5,740 and the remainingpayments to be made in 11 annual installments of $6,000 each beginning October 1, 2007. Theprevailing interest rate was 8%. The following data were abstracted from present-value tables(rounded).Present value of $1.00 at 8% Present value of an ordinary annuity of $1.00 at 8%10 years .463 10 years 6.71011 years .429 11 years 7.13915 years .315 15 years 8.559
- $6,000 X 11 + $5,740
- Q: machinery purchsed entry and derpeciation charged for it?
- The purchase: Dr. Machinery (Fixed Assets) Cr. Cash / Accounts Payable Depreciation: Dr. Machinery Depreciation Expense Cr. Machinery Accumulated Depreciation Note that the accumulated depreciation is a contra account for the fixed assets, and what appears on the Balance sheet is the net of the two figures.
- Q: I have fat thighs but don't want to buy expensive machinery what do i do?
- Go for a walk - two miles 5 days out of 7 days each week
Send your message to us
Precast Concrete Small Hollow Core Slab Extrusion Equipment
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 5 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
