Plastic Tubes PPR Brass Stop Valve with Lift Type - Food Hygiene Compliant and Non-Toxic
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 2000 pc
- Supply Capability:
- 340000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Features
1. Corrosion resistance
PPR pipes and fittings can resistant to most chemical corrosion; it can withstand PH value range 1-14 high concentration of acid and alkali corrosion over a wide temperature range.
2. Installation performance
PPR pipe PPR pipe is light in weight, and the operation installation is easy, which make it available to weld again. It is very important that pipe and pipe fittings can be welded together in seconds with a simple tool. Compared to traditional connection methods it can save 40%~50% of the time.
3. Safety Indicators
The basic component of PPR is carbon and hydrogen which is simple. It keeps in line with food hygiene regulations, non-toxic. If you use PPR pipe, there will no dirt in the inner wall or “secondary water pollution” caused by rust any more.PPR pipe ,green building materials, is more suitable for transporting drinking water.
Advantages of PPR pipe
1. Maximum operating temperature can up to 95℃; it can work in a long term under the condition of 70℃ and 1.0Mpa.
2. PPR pipe density is only 1/8 of metal pipe; pressure resistance strength test is up 5Mpa, with good toughness, impact resistance.
3. Inner diameter of PPR pipe is little bigger than that of pipe fittings, which can ensure not to increase the resistance to fluid flow.
4. Inner wall of PPR pipe is smooth, no rust, no scaling, small fluid resistance
5. PPR pipe has excellent insulation properties, can significantly reduce the vibration and noise caused by the flow of liquid.
6. PPR pipe energy consumption is only 20% of steel pipe; its thermal coefficient is also only 1/200 of steel pipe, reducing heat loss greatly.
7. PPR pipe is poor electrical conductor material, which can avoid galvanic corrosion phenomena.
8. With poor thermal conductivity, PPR pipe can reduce condensation.
9. PPR pipes, fittings are recyclable.
Application
1. Hot and cold drinking water supply system of civil and industrial buildings
2. Clean, pure water piping system
3. Beverage production and transport systems
4. Industrial liquid delivery system
5. Central air conditioning system
6. Hot water circulation Heating System
7. Compressed air piping system
8. Garden and greenhouse irrigation systems
- Q: How do you prevent plastic tubes from melting in high temperatures?
- One way to prevent plastic tubes from melting in high temperatures is to use materials with higher melting points, such as heat-resistant plastics or thermally stable polymers. Additionally, insulation or protective coatings can be applied to the tubes to minimize heat transfer and reduce the risk of melting.
- Q: ...placing them in a humidor? Seems to me that they won't achieve proper humidification if they're wrapped in plastic or stored in a sealed metal tube. What say you?
- Ok so first off it's not the semen that travels to the egg it's the sperm. Semen is what the sperm are in when they come out. The sperm leaves the semen within a few minutes and travels into the womb. Then it travels thru the tubes to where it expects the egg to be. That can take hours or longer depending upon how well the sperm swim and how straight they go. Most sperm are not shaped right and they get lost or swim around in circles or just plain die before they get there. But since there are millions of them this is not usually a problem. Sperm can live up to 5 days, but 2-3 days is more common.
- Q: What is the minimum length of plastic tubes?
- The minimum length of plastic tubes can vary depending on the manufacturer and the purpose of the tube. However, in general, plastic tubes can be found in lengths as short as a few centimeters or even millimeters.
- Q: i have to make it at school so i can't make anything else (wooden box etc)i need to heat 4 litres (a gallon) of cold water in the space of roughly an hour and a half using just solar energycould i please get an easy step by step guide for this?how will i make the water circulate through the tube etc? (this was just an idea given by my teacher, the solution doesnt have to incorporate this)
- Take a clear plastic container(can be one of those large ones). Fill it with water. Take black tube. Place it in tub of water so that one end is on the top and the other on the bottom. (i think if possible you should have rest of tube outside tub) Take the end of the tube that is on top and suck the water that is into) Place tube back in water (this should cause the water to begin to circulate through tube) Over time the water passing through tube will heat up due to sunlight and then the cycle repeats. Sticky tape may be required
- Q: What is the maximum weight that plastic tubes can support?
- The maximum weight that plastic tubes can support depends on various factors such as the type of plastic, diameter and thickness of the tube, and the specific application. It is recommended to consult the manufacturer or conduct specific tests to determine the maximum weight that plastic tubes can withstand.
- Q: My 2000 ford focus broke down last week and me and a family friend determined its the fuel pump so as we were replacing it we noticed the nozzle hooking into the top of the fuel pump was snapped it is connected to a hard plastic tube and I need to know either what the tube is called or what the nozzle is called PLEASE HELP!!!
- You will notice the quick disconnect line is disconnected from the fuel pump housing. It should be able to be bought at a Ford dealer separate from the hanger, if your auto parts place does not have a repair kit for Ford quick disconnects.
- Q: does it matter where you pur the fluid and how much should be poured in my vanhave a radiator caop and then like a long plastic tube that goes down to the engine and says coolant on it...where do i pour the antifreeze??
- Make absolutely sure you replace the radiator cap with an AC Delco closed system radiator cap. The correct part # for this cap is listed in your glove compartment manual in the specification pages. A closed system radiator cap has a large rubber gasket covering the inverted shell spring facing you as you look inside it. From your description the gasket is missing or the pressure rating is incorrect. Also, make sure the hose that run from the coolant recovery tank to the the small outlet at the top of the cap neck is free and clear. This allows the the radiator to push coolant back inside the reservoir when the pressure exceeds the pressure rating on top of the radiator cap. As the engine and cooling system looses heat when you turn off the motor a secondary check valve in the center of the radiator cap opens allowing the coolant to be pulled under vacuum back into the radiator, block and cylinder heads. The whole plan of this system is to evacuate all air bubbles from the coolant making the system more efficient.
- Q: Are plastic tubes suitable for use in the electronics industry?
- Yes, plastic tubes are suitable for use in the electronics industry. They offer several advantages such as being lightweight, cost-effective, and easily customizable. Plastic tubes also provide insulation, protection, and organization for wires, cables, and other electronic components. Additionally, they can be made to meet specific requirements, including resistance to heat, chemicals, and UV radiation.
- Q: Can plastic tubes be used for vacuum systems?
- Yes, plastic tubes can be used for vacuum systems. However, it is important to select the appropriate type of plastic that can withstand the pressure differential created by the vacuum. Additionally, the plastic tubes should have low outgassing properties to avoid contamination in the vacuum system.
- Q: does anyone have any ideas on how i can hide my plugs
- put a plant in front of it....or you can get a low table. almost like a coffee table that you can put things like picture frames, or DVD player etc. on and that should hide it too
Send your message to us
Plastic Tubes PPR Brass Stop Valve with Lift Type - Food Hygiene Compliant and Non-Toxic
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 2000 pc
- Supply Capability:
- 340000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
