Pipe Conveyor Belt-conveyor belt series
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
product description:
Description: Use single or multi ply fabric as carcass, and special design is applied on the belt edges, which enable the
belt to have proper transverse rigidity and make it easy to form the pipe shape and fatigue resistant.
Application: it is suitable for close material conveying in cement plants, ports, power station and fertilizer plants, etc.
Advantages: 1.with proper rigidity, it is able to keep stable circle
2. band edge and good sealing at connection point
3. anti-fatigue, anti-abrasion and with good carrying capacity
4. use close conveying, no spillage, no dust
5. can be bent, steep inclination, reverse conveying
product feature:
1.with proper rigidity, it is able to keep stable circle
2. band edge and good sealing at connection point
3. anti-fatigue, anti-abrasion and with good carrying capacity
4. use close conveying, no spillage, no dust
5. can be bent, steep inclination, reverse conveying
- Q: How about white rubber strap yellowing?
- The white rubber band is yellow and rubbed with the weld polish. Remember, the ratio is 1 to 70.
- Q: What are the structural features of the sealing device of the floating roof tank?
- The sealing material has great flexibility, so that it can keep the tank wall and the floating tip clearance changes (B + 80mm) good seal, also can make the floating roof lifting freely without getting stuck.
- Q: How many layers of rubber band are glued together?
- Plain belt(with high strength nylon conveyor) products perform GB7984-2001 standards.Cover: the tensile strength of not less than 15Mpa, tensile elongation of not less than 350%, the wear is less than 200mm3, bonding strength between the layers is not less than the average value of the longitudinal 3.2N/mm layers of cloth, cover rubber and cloth layer is not less than 2.1 N/mmFull thickness longitudinal elongation of not less than 10%, the thickness of longitudinal reference force elongation is not greater than 1.5%
- Q: How should the rubber strap be cleaned and maintained?
- In the water carefully cleaning before cleaning the surface of the watch strap, watch strap, then clean the watchband slot in the dirt. After the band is cleaned, there must be no gloss. It can be painted with silicone oil, so that the strap will be renewed again.
- Q: How to distinguish sanlux rubber belt quality
- Belt conveyor belt conveyor is the most common fault, if not handled in a timely manner, and belt conveyor, conveyor belt and the frame will lead to intense friction, the conveyor belt edge is napping and even tear, not only affect the life of the conveyor belt, but also easy to spread, the influence of cultural production. When the conveyor belt from the serious deformation of roller and fall, cause downtime accident, therefore, the belt conveyor installation, debugging, operation and maintenance work should be paid special attention to the operating state of the conveyor belt, to prevent the belt deviation caused by the accident
- Q: 90 degree turn conveyor
- Hello, general conveyor belt conveyor belt, roller, roller and drive, brake, tension, modification, loading, unloading, cleaning and other devices.
- Q: White rubber strap dirty, how to do?
- Now clean the strap. Clean the surface of the strap first, then clean the stain in the band gap. The gaps are so tight that it's difficult to clean the dirt inside. Now the gaps are opened up by the cylinder, and the dirt can be cleaned.
- Q: How to clean rubber band?
- Last winter I bought a stainless steel basin. I baked it on the heater. It was easy to remove the label, and it didn't leave any trace.Recently, I have encountered similar situations in my work. I found that the method of wiping with alcohol is better, or it can be removed with an eraserThe newly bought stainless steel pots or glass stick on some labels, off the labels, stickers on the traces of it is difficult to remove, wipe with a damp cloth, scraping knife will often leave traces, after repeated practice, I summarized some tips to share with you.On the hard surface of the self-adhesive mark, we can use non greasy wash water on the surface of the object, and then gently wipe with soft cloth; with industrial alcohol or gasoline can also remove these traces. If these stickers are found on the skin, they can also be removed with lemon juice.In addition, hand cream can also be achieved to remove the effect of self-adhesive, hand cream contains a lot of water (generally more than 70%), water contains a certain amount of surfactant. Surfactant has good wetting, permeating and dissolving ability. It can quickly penetrate between the adhesive and the surface of the object, so as to achieve the goal of cleaning. You can also find some similar products, such as creams, facial cleanser and detergent.
- Q: What is the role of the rubber band Caoguan vehicle above
- In the tank, the dust material is sent out by a pipe, the front engine is pressed with an air pump, and then the powder material in the tank comes out of the pipe
- Q: What is the function of the coal feeder? What are the common types of coal feeder?
- Replaceable vibrating feeder, reciprocating feeder and old belt feeder, but the original installation foundation can not be changed at all;The speed control mode can use manual stepless speed change and frequency conversion speed regulation, and can realize field and remote centralized control, which is convenient for remote monitoring and speed regulation.Commonly used coal feeder has a belt feeder, reciprocating feeder, etc.!
Send your message to us
Pipe Conveyor Belt-conveyor belt series
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords