OTR HYDRAULIC PILING RIG MACHINE,SERIE OTR580D
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
OTR580D:
①. Base: CAT 329D(HHP)
②. Max pile diameter (mm): 1800
③. Max pile depth (m): 60
④. Engine: CAT C7 ACERT 187KW
⑤. Maximum nominal torque (kNm): 200
⑥. Undercarriage with expandable (mm): 3000-4300
1. Adopts the complete OEM Caterpillar retractable-crawler dedicated chasis,Its telescopic scope between the two crawler ends extends from 3000mm(at transportation) to 4400mm(at work). Undercarriage with expandable and removable tracks by means of hydraulic cylinders, guarantee exception stabbility in any type of ground. It has considerable traction force which allows easy movement even in the most difficult job sites.
2.Takes international top CAT Diesel engine with electric injection, turbocharged and air inter-cooling system. It is high reliability, fuel economy and power reserves. Emissions meet standard EPAC-Ⅲ.
3.The winches are positioned in the lower part of the mast, in front of the cabin, so that the operator can constantly check the proper operation. Thanks to the fact that the cable moves parallely to the mast, flection is not created on the upper part of the mast and operating life of the cable is therefore much longer. Tail positioned winch is available for heavy-duty type.
4.New design parallelogram system, computer optimized design and simplified pin connection system featured with nice appearance, great driving force and good stability, especially shaped to fit crowd system, allowing working radius adjustment always maintaining the mast in vertical position. The parallelogram system is easily for convenient transform between transportation and working conditions.
5.Self-erecting mast, high level anti-shock technology and high-strenth material steel attribute to that max torque can be applied all over the mast length. Multipurpose design for cylinder crowed system. Sensor and control center realize real-time measurement of the inclination angle, auto adjustment of mast verticality and inching adjustment.
6.Crowd system by means of long stroke hydraulic cylinder or crowd winch separately, are option for your exact request.
7.Rotary head with variable displacement motors and one high spin off speed. And rotary is extremely reliable, it has been disgned in order to gurantee a very compact, efficient and powerful rotary. The transmission group of rotary is made up of a hydraulic motor and new power shift purposely studied and designed to obtain maximum perfomance. During the drilling phase, the rotary has the entire power of the diesel at its complete disposal. Adapter of rotary is essential to absorb the considerable shock connected to the high speed of the main winch.
8.Telescopic kelly bar with guide made by high quality specially for high boring strength and torque force. Available with friction or inter-locking type.
9. All the main hydraulic components(pumps, valve, motor, connector) are from well-known international brands such as Bosch-Rexroth, brevini, which ensure the stability, reliability, high-efficiency and energy-saving of the entire system
10.Electronic controlling system is an innovative system, developed by Osaint, which controls and monitors the operation of the machines. For ease of operation, the system is controlled by a touch screen located in the cab. The system function is to enable the machines to perform different functions more efficiently. A dedicated power module electronic control and CAN-Bus system ensures the main pumps and Disel engine to work at their most effective and productive stages.
- Q: Attention problems of rotary drilling rig
- 1 remove the inspection cover near the base of the boom.2. Remove bolts, washers, lower cover and gasket.3, check the gasket, if there is obvious damage, should replace the gasket.4. Check the grease surface. Grease should be evenly distributed at the bottom of the tank.5. Check whether the grease is contaminated or discolored.6 grease should be replaced if the grease is contaminated or discolored by water.7. Lift the boom and transfer the upper structure to the 1/4 ring.8 repeat the procedure 7 1/4 cycles.
- Q: Long spiral applies to high-speed rail construction, civil construction, rotary excavation in relatively large diameter foundation construction, such as bridge foundation construction is more common.
- The auger drills, such as short auger bit, ordinary drill bit, sand drill bit, core and so on, can be drilled into different layers of clay, gravel, pebble and medium weathered mudstone.
- Q: Can the auger drill be drilled into the two - longest granite of the 1200kp?
- Depends on the power of the machine
- Q: My rotary drilling rig has broken several rotary drilling pipes. Is it my drill pipe or the reason of my rig?
- Hello, this is a lot of reasons, 1. may be man-made problems, 2. can also check the machine, 3. can check the drill pipe 4., to see if the geological suitability of your choice of drilling rod
- Q: Does the rotary drilling rig cycle with mud?
- Montreal chemical is a new type of rotary drilling fluid mud wall construction, is the foundation of companies and research institutes to develop and promote the products. The product is instant and can be sprayed into the hole along the jet stream.
- Q: What is the difference between bored pile and rotary pile?
- Bored pile is wider, and all kinds of machinery or artificial way of pile foundation construction can be called bored pile. The rotary bored pile is a kind of bored pile, especially the drilling method of rotary drilling machine. Other drilling methods include spiral drilling, positive circulation, reverse circulation drilling, impact drilling, etc..
- Q: I love inventing super rotary drilling rigs. Can they dig wells? Can they move rocks? How deep can they hit?
- Now, the rotary drilling will be replaced by the new double power wells drilled by the China shipping line
- Q: How to ensure the verticality of rotary drilling rig
- To ensure that the verticality should pay attention to what time?:1, drill mast verticality should be controlled within 0.2 degrees.2. The gap between the power head and the drill mast must not be too large.3. The center of the follow-up frame of the drill rod shall be in accordance with the center of the power head.4, not square drill pipe and drill pipe deflection.5, the lower protective cylinder should be vertical.6, bit square box and the central cone cannot skew.7, for the big changes in the bottom, it is recommended to use straight cylindrical bit.
- Q: 31 rotary drilling rig electromagnetic valve is what?
- The solenoid valve is used to drive the valve core to control the direction of compressed air, so as to control the direction of the pneumatic actuator switch.Its advantage is simple operation, easy to realize remote control.
- Q: Current situation of rotary drilling rig in China
- Rotary drilling rig industry, due to the 2003 Qinghai Tibet railway project and the Beijing Olympic project led by the market awareness increased rapidly, the market capacity expanded rapidly. The upsurge of market demand has attracted the entry of large construction machinery enterprises in China. 31, XCMG, ZOOMLION and sunward have been involved in it, and have rapidly expanded their market share. Since 2005, the domestic brand rotary drilling rig has basically replaced foreign brands. Since 2006, the sales of rotary drilling have been increasing by leaps and bounds in recent years. Especially in 2009, the domestic rotary drilling rig manufacturing enterprises as many as 30, the introduction of nearly 200 models of products, the market retains nearly 4000 units, the market competition is unprecedented fierce.
Send your message to us
OTR HYDRAULIC PILING RIG MACHINE,SERIE OTR580D
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords