Oil Seal for Gear Type Water Pump with Good Quality
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description:
Product Name: OIL SEAL FOR GEAR TYPE WATER PUMP
1. Specification
Seal Dimension(ID*OD*B) | 110*160 (MM)，113*150 (MM)，113*160(MM)，120*165(MM) |
Seal Material | RUBBER+STEEL |
Color | Blue/Yellow/Black or customize |
Production Capacity | 500000 Piece/Pieces per Month |
Packing | Plastic bag and carton box, also according to your requirements |
MOQ | 1 PCS |
Preservation Notice | Closed,Dry and Avoid The Sun |
Sample | Available |
Working Temperature | -40° to +240° F |
Working Pressure | 10 PC MAXIMUM |
Mounting Eccentric | Below 0.1mmTIR |
Shaft Eccentric | Below 0.05mmTIR |
2. Application
Dustproof, High and Low Speed Rotating shaft and Reciprocating Seals Mineral Oil and water Seals. |
3. Package
Plastic bag and carton box, also according to your requirements |
FAQ:
Q1: Why buy Materials & Equipment from OKorder.com?
A1: All products have its ISO certifications, adheres to the highest standards and a commitment to supply chain safety and customer satisfaction.
Q2: How do we guarantee the quality of our products?
A2: We have established an advanced quality management system which conducts strict quality tests at every step, from raw materials to the final product. At the same time, we provide extensive follow-up service assurances as required.
Q3: How soon can we receive the product after purchase?
A3: Within three days of placing an order, we will begin production. The specific shipping date is dependent upon international and government factors, but is typically 10 to 30 workdays.
Q4: If we can produce OIL SEAL FOR GEAR TYPE WATER PUMP with Good Quality according to customers request?
A4: Yes, we can produce OIL SEAL FOR GEAR TYPE WATER PUMP according to the difference country situations to make it suitable to the market and customers. We have very professional technical team to make the design.
Q5: How to make a quick resolution for after service?
A5: We have overseas branches all-around of world, If needed, the seller shall dispatch 2 engineers to the buyer's site for supervision of training. The buyer shall make available of necessary facilities &skilled personnel at site for training.
Images:
- Q: Which kind person can provide information about this? Thanks
- Check the old bearing manual, which is only a little bit said, do not quite understand, this information on the Internet seems to be not
- Q: My car is the 150 Honda, recently bought a little behind the rear wheels of a vehicle. Look for the master to see, say is bushing, manufacturers do little, today to change is also a put in, bearing fell, and can not find what causes. So, ask your friends to talk about the Bush, knock on the bearing, which is fixed or can rotate. trouble
- The outer diameter of the inner hole is Bush general control of the inner hole is slightly larger than the diameter of 0.5 to 1 mm in diameter, is in line with the bearing inner circle, the outer contour is generally higher than bearing inner circle (with the seal ring of the circle is small) 0.5 to 1 mm (the parameters in the design manual on). Length is the length of the assembly of the outer circle of the two bearings of the wheel hub, then slightly longer 0.2 to 0.5 millimeters. If the liner on the wheel in fall aside (in the wrong hole), bush outside had two rubber ring, used in, is not absolutely on the center, but the front axle is chamfered (tip), it can make the eccentric shaft wear in their. If you lose the rubber lining, the Bush will not be able to correct. You can substitute yourself with a thick rubber band.
- Q: What is bearing bushing?
- Bearing typeabrasionresistant sleeve made of a material called bearing bushing, the bushing. Usually cast in the inner surface of the Bush, mainly for reducing cost and saving valuable antifriction materials. Thickness 0.5-6mm, used for large or important bearings.
- Q: In the shafting, the role of bearings is known, the general bearings should have shaft sleeve, as if outside the shaft lining of bread Expert answer please!
- The 2 floor is very correct and very detailed! The bushing will appear only in the rudder system! Shafts have only bushings or covers
- Q: What is the mosaic bearing, please? What's the Bush?
- The bearing is a component that can hold and reduce the coefficient of load friction in the course of mechanical transmission. It can also be said that when other parts produce relative motion on each other on the shaft, the friction coefficient used to reduce the power transmission process and the fixed position of the center of the shaft are fixed. Bearing is one of the most important parts in modern machinery and equipment. Its main function is to support the mechanical rotating body, in order to reduce the equipment in the transmission process of mechanical load, friction coefficient. According to the friction properties of moving elements, the bearings can be divided into two types: rolling bearings and sliding bearings.Bush antifriction material, reduce wear of shaft and hole, is sliding bearing; and it is the use of contact surface of the Bush to wear bushing, surface protection and contact wear it, after reaching a certain level of replacement.
- Q: Is the bearing block fixed for fixing the shaft or the fixed bearing, and is there anything else similar to the bearing bushing? Please explain carefully
- The purpose of the bearing is to use the fastening sleeve or the unloading sleeve for disassembly and installation. Easy installation, tight setting, easy disassembly and disassembly.
- Q: What materials are used in the bearing bushing? What are the requirements?
- Low load steel base copper plastic bushing, high load, can use double metal bushing.Bearing typeabrasionresistant sleeve made of a material called bearing bushing, the bushing. Usually cast in the inner surface of the Bush, mainly for reducing cost and saving valuable antifriction materials. Thickness 0.5-6mm, used for large or important bearings. Bearing bushing is mainly to replace the shaft wear, but also support shaft operation, reduce friction and wear, vibration reduction role.The earliest sliding and rolling body bearings were made of wood. Ceramic, glass or sapphire are also used, steel, copper and other metals (such as plastic, nylon, bakelite, Teflon and UHMWPE) have been widely used.From heavy duty wheel shafts and machine spindles to sophisticated timepiece parts, rotational bearings are required on many occasions. The simplest type of rotary bearing is the bushing bearing, which is just a bushing between the wheel and the axle. The design was then replaced by rolling bearings, in which many cylindrical rollers replaced the original bushings, each of which was like a single wheel. The first practical rolling bearing with cage was the watch and clock, which was invented by John Harrison in 1760 to make H3 meter.
Send your message to us
Oil Seal for Gear Type Water Pump with Good Quality
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
