Seal DN113*160 for Mixer Truck with Good Quality
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description:
Product Name: Seal DN113*160 for mixer truck with Good Quality
1. Specification
Seal Dimension(ID*OD*B) | 110*160 (MM)，113*150 (MM)，113*160(MM)，120*165(MM) |
Seal Material | RUBBER+STEEL |
Color | Blue/Yellow/Black or customize |
Production Capacity | 500000 Piece/Pieces per Month |
Packing | Plastic bag and carton box, also according to your requirements |
MOQ | 1 PCS |
Preservation Notice | Closed,Dry and Avoid The Sun |
Sample | Available |
Working Temperature | -40° to +240° F |
Working Pressure | 10 PC MAXIMUM |
Mounting Eccentric | Below 0.1mmTIR |
Shaft Eccentric | Below 0.05mmTIR |
2. Application
Dustproof, High and Low Speed Rotating shaft and Reciprocating Seals Mineral Oil and water Seals. |
3. Package
Plastic bag and carton box, also according to your requirements |
FAQ:
Q1: Why buy Materials & Equipment from OKorder.com?
A1: All products have its ISO certifications, adheres to the highest standards and a commitment to supply chain safety and customer satisfaction.
Q2: How do we guarantee the quality of our products?
A2: We have established an advanced quality management system which conducts strict quality tests at every step, from raw materials to the final product. At the same time, we provide extensive follow-up service assurances as required.
Q3: How soon can we receive the product after purchase?
A3: Within three days of placing an order, we will begin production. The specific shipping date is dependent upon international and government factors, but is typically 10 to 30 workdays.
Q4: If we can produce Seal DN113*160 for mixer truck with Good Quality with Good Quality according to customers request?
A4: Yes, we can produce Seal DN113*160 for mixer truck with Good Quality according to the difference country situations to make it suitable to the market and customers. We have very professional technical team to make the design.
Q5: How to make a quick resolution for after service?
A5: We have overseas branches all-around of world, If needed, the seller shall dispatch 2 engineers to the buyer's site for supervision of training. The buyer shall make available of necessary facilities &skilled personnel at site for training.
Images:
- Q:In the shafting, the role of bearings is known, the general bearings should have shaft sleeve, as if outside the shaft lining of bread Expert answer please!
- The Bush is attached to the fixed bearing and the shaft sleeve is wrapped on the shaft
- Q:My car is the 150 Honda, recently bought a little behind the rear wheels of a vehicle. Look for the master to see, say is bushing, manufacturers do little, today to change is also a put in, bearing fell, and can not find what causes. So, ask your friends to talk about the Bush, knock on the bearing, which is fixed or can rotate. trouble
- The outer diameter of the inner hole is Bush general control of the inner hole is slightly larger than the diameter of 0.5 to 1 mm in diameter, is in line with the bearing inner circle, the outer contour is generally higher than bearing inner circle (with the seal ring of the circle is small) 0.5 to 1 mm (the parameters in the design manual on). Length is the length of the assembly of the outer circle of the two bearings of the wheel hub, then slightly longer 0.2 to 0.5 millimeters. If the liner on the wheel in fall aside (in the wrong hole), bush outside had two rubber ring, used in, is not absolutely on the center, but the front axle is chamfered (tip), it can make the eccentric shaft wear in their. If you lose the rubber lining, the Bush will not be able to correct. You can substitute yourself with a thick rubber band.
- Q:What is the mosaic bearing, please? What's the Bush?
- Copper bushing is a component of mechanical equipment, it is mainly used in belt rejection machine, and the application is also more extensive. In the application of mechanical equipment, copper bushing is an indispensable component, it is mainly used to make amorphous, single and magnetic materials. The main materials used in copper bushings are centrifugal casting and die casting. The color of its appearance is mostly cyan and yellow. Copper bushings, like other mechanical equipment, also have their own characteristics. It has the characteristics of wear resistance, corrosion resistance, compression resistance and so on
- Q:Which kind person can provide information about this? Thanks
- Check the old bearing manual, which is only a little bit said, do not quite understand, this information on the Internet seems to be not
- Q:What is bearing bushing?
- Bearing typeabrasionresistant sleeve made of a material called bearing bushing, the bushing. Usually cast in the inner surface of the Bush, mainly for reducing cost and saving valuable antifriction materials. Thickness 0.5-6mm, used for large or important bearings.
- Q:Is the bearing block fixed for fixing the shaft or the fixed bearing, and is there anything else similar to the bearing bushing? Please explain carefully
- A normally tight sleeve is used to secure bearings and shafts, between bearings and shafts
- Q:What materials are used in the bearing bushing? What are the requirements?
- The material used in the bearing bushing needs to be determined according to the actual application.If it is low load, use a steel based metal free plastic bushing,If it is of high load, use a steel based iron plastic bushing.Bearing typeabrasionresistant sleeve made of a material called bearing bushing, the bushing. Usually cast in the inner surface of the Bush, mainly for reducing cost and saving valuable antifriction materials. Thickness 0.5-6mm, used for large or important bearings.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Seal DN113*160 for Mixer Truck with Good Quality
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
