Marquetry Wood Veneers - High Quality Low Carbon Wood 002
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000 sq.m, m²
- Supply Capability:
- 400000 sq.m. Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General information of low carbon wood
Raw material |
Sawdust, corn-straw and tailing, can be recycled after using. |
Technology |
Utilizing molecular structure of crystalline-state solidification, shaping under normal temperature and pressure with low carbon emission. |
Installation |
Stitching, wet-sticking and dry-fasten connecting |
Character |
Favorable corrosion resistance, non-ignitable, water-proof, UV-resistant, high resistance to fire, water and insects. |
Lead time |
30 days after receiving buyer's original L/C or Prepayment |
Package |
Seaworthy Export Standard Wooden Pallet |
Four breakthroughs |
Comprehensive utilization of natural resources: Be recyclable, using sawdust, corn-straw and tailing as materials. The product can be recycled after using. |
Low carbon and energy saving in the course of production: Adopting the independent individual property’s technology, utilizing molecular structure of crystalline-state solidification, shaping under normal temperature and pressure with low carbon emission. | |
Environmental and healthy in the course of construction and using: Synthesized by natural inorganic raw materials, nontoxic, odorless and non-radiative simple installation, which could save energy cost and reduce and waste emission, raise efficiency and reduce erection time. | |
From nature, beyond nature: Full realization of the natural texture, high resistance to fire, water and insects. Do not rot or fade after long time usage. Super self-cleaning needs low maintenance cost. Vivid color and appearance provides a wide space to designers. | |
Six advantages |
Lower more than 50% cost, enhance building's performance to price ratio. |
Cutting at will, Fixing easy, Shorting project time. | |
Good performance in resistance to elements, corrosion-resistant ,resistance to termite, fire resistance and water-resistant, far from distortion and discolorations in 30 years. | |
Well self-cleaning, low cost in later maintenance: Don't need professional maintenance in 30s(Cleaning with water only), saving much cost. | |
Customize the color, showing individuation: Beyond 400 kinds of colors, designers could exhibit their imagination. | |
Compound with natural inorganic materials: Without formaldehyde and toluol, sustained releasing negative oxygen ion, forming nature oxygen bar. | |
Special specifications are available on customers' requirements. |
Specification of low carbon wood
Standard: 3000mm(L)×1200mm(W)×15mm(T)
Standard length: 3000mm
Standard width: 120mm,150mm,200mm,300mm(including 3mm kerf width)
Standard thickness: 15mm
Technical information of low carbon wood
Density |
1.26g/m3 |
Folding strength |
10Mpa |
Dry-shrinkage rate |
0.05% |
Elastic modulus |
7211Mpa |
Wet expansion rate |
0.17% |
Shear strength |
3.5Mpa |
Screw holding capability |
121N/mm |
Coefficient of heat conductivity |
0.69(W(m·k)) |
Frost resistance |
Thaw-freeze cycle after 30 times, no slip crack and peeling off | ||
Unpermeability |
No drop appearing on the bottom after 24 hours. | ||
Impact strength |
3.3KJ/m2 |
Products exhibition of low carbon wood
Low carbon wood sheets with thin grain
Low carbon wood sheets with thick grain
The project picture of low carbon wood
- Q: Often, the processing of natural vines is done by slicing the method. The process flow is as follows
- Different diameter logs should use different sawing programs. The thick lines in the figure are the saw lines, and the direction of the arrows is the planing direction of the planer:
- Q: A lot of Advantages of veneer
- The same mild touch as the logs. More economical than the logs, low prices. Easy to apply to all kinds of body, painting versatility.
- Q: The following table lists the cooking criteria for several types of wood,
- intermittent operation of the drying room. Drying room is old-fashioned drying equipment, very economical, but dry quality is better.
- Q: Technology veneer and natural veneer distinction
- But it has a natural veneer than the advantages. That is not blistering. I think you should understand that. And its pattern of pattern.
- Q: Different veneer has different production processes
- Most furniture companies believe that science and technology veneer is not a native wood, but what is it, they also do not know, or simply called "artificial veneer".
- Q: What is the veneer panel
- made by the adhesive process made with a single decorative effect of the decorative plate
- Q: Veneer should pay attention to the different production processes
- the process is complicated, the general enterprise does not understand, the speculation also naturally increases.
- Q: The Production process of cooking
- The following table lists the cooking criteria for several types of wood, for reference only.
- Q: What are the quality items of veneer piles?
- said sapwood. In the medullary around the material color deep, less water part, said the heartwood
- Q: What are the specifications for veneer?
- The length of one meter below the general is not sold in the market, only to do the floor will be used.
Send your message to us
Marquetry Wood Veneers - High Quality Low Carbon Wood 002
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000 sq.m, m²
- Supply Capability:
- 400000 sq.m. Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches