Magnesite Brick MZ89
- Ref Price:
-
$561.36 - 686.10
/ m.t.
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 10 Tons m.t.
- Supply Capability:
- 1000 Tons Per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Information of Magnesia Brick MZ89
Magnesia bricks MZ89 are made from the sintered magnesium. The essential properties of magnesia brick depends on the nature of the raw materials, the mineral composition, microstructure and closely on the density of the products. The magnesia bricks are belong to alkali series refractories and widely used in alkaline atmosphere. We could supply a wide range of shapes.
Characteristics of Magnesia Brick MZ89
Our magnesia bricks MZ89 have the following features:
Good high temperature properties
Strong resistance to slag
High Refractoriness under load
Technical data of Magnesia Brick MZ89
|
Sintered Magnesia Brick---MZ89 | ||
|
Physical Properties: |
|
|
|
Cold Crushing Strength |
Mpa |
50 |
|
Apparent Porosity |
% |
20 |
|
Refractories Under Load(0.2Mpa) |
℃ |
1550 |
|
Chemical Analysis: |
|
0～-0.6 |
|
MgO |
% |
89.0 |
|
Note: Technical Data are typical average results from test pieces.The technical data is offered solely for your consideration.And CNBM reserve the right to modify the technical data without any prior notice.Users of CNBM products should make their own tests to determine the suitability of each products for their particular purposes. | ||
Typical Application of Magnesia Brick MZ89
Typical applications of magnesia bricks include ferroalloy furnace, metal mixer, Non-metallurgy industry furnace, regenerator in glass furnace, high temperature kiln,calcined lime furnace.
We has success in magnesia bricks due to their excellent thermal shock resistant and high temperature properties. CNBM also has experience in magnesia brick application and would like to assist you in product selection, system design, and installation techniques.
- Q:The index of magnesia brick
- Room temperature compressive strength≥（MPa）（15－25－）24.5－24.5－24.5－24.5－40－40－40
- Q:How do you differentiate between the two clearly? Where is the key? Thank you
- Magnesia brick have high refractoriness, alkali slag good performance, high load softening temperature, but poor thermal shock resistance. The sintering magnesia brick brick magnesite as raw material, crushing, proportioning, mixing, forming, in 1550 ~ 1600 degrees firing, high purity products firing temperature is over 1750 DEG C. Don't add chemical bond magnesia brick is appropriate in magnesia, through mixing, molding and drying.
- Q:Magnesia brick
- Magnesia brick have high refractoriness, alkali slag good performance, high load softening temperature, but poor thermal shock resistance. The sintering magnesia brick brick magnesite as raw material, crushing, proportioning, mixing, forming, in 1550 ~ 1600 degrees firing, high purity products firing temperature is over 1750 DEG C. Don't add chemical bond magnesia brick is appropriate in magnesia, through mixing, molding and drying
- Q:Brick price?
- There are various series of unshaped refractory gunning, magnesia ramming material, mending material, coating material, dry lining material, composite refining agent, covering agent, tundish and tundish slag wall, ladle drainage sand and electric furnace taphole filler etc..
- Q:Process for producing magnesia chrome brick
- The oxide of iron reacts to produce a loose effect caused by the expansion of the spinel. Also, the magnesia chrome brick can be made from the synthetic common sintered material. In addition, there are non burned magnesia chrome bricks, for example, non burned magnesia chrome bricks combined with inorganic magnesium salt solutions. The unfired magnesia chrome brick has the advantages of simple production process, low cost and good thermal stability, but the strength of the high temperature is far less than that of the burnt brick. In the late 50s, a so-called "direct bonding" magnesia chrome brick was developed. The characteristics of this brick raw material is pure, high firing temperature, periclase and spinel phase with high temperature directly, silicate and other low melting point phase for island distribution, therefore, significantly improve the high temperature strength and slag resistance of brick.
- Q:Refractory brick, high alumina brick, magnesia chrome brick, magnesia brick, clay brick, which type of high temperature refractory brick?
- The super high alumina brick in high alumina refractory brick has the highest refractoriness, and the corresponding production cost is higher.
- Q:Manufacture of various refractory magnesia brick mainly comes from Magnesium Oxide, what kind of ore?
- The ore quality requirements of MgO = 41%, CaO = 6%, SiO2 = 5%. The resources of magnesite in China are rich. The types of deposits include sedimentary metamorphic deposits, sedimentary hydrothermal metasomatic deposits and weathering leaching deposits.
- Q:Magnesite chrome brick, magnesia chrome brick indicators? What is the price?.
- If you want to know the indicators of chrome brick, magnesia chrome brick must know you are in what furnace above, there is in what position
- Q:High purity magnesia brick masonry mortar for what?
- Always! There is no 800 degrees can be sintered chamotte? As long as the dregs and do not break the aluminum content, the magnesia brick stick together can!
- Q:With different capacitance magnesia brick brick
- It has good thermal stability, corrosion resistance and spalling resistance. Widely used in converter, arc furnace and other industrial furnace lining refractory.
1. Manufacturer Overview |
|
|---|---|
| Location | Henan, China |
| Year Established | 2003 |
| Annual Output Value | Above US$ 50 Million |
| Main Markets | Taiwan; Germany; Italy; Turkey; France; England; Japan; Thailand; Vietnam; Idonesia; Egypt; Ukraine |
| Company Certifications | ISO 9001:2008;GB/T 19001-2008 |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | Tianjin |
| Export Percentage | 10%-20% |
| No.of Employees in Trade Department | 3 People |
| Language Spoken: | English; Chinese |
| b)Factory Information | |
| Factory Size: | Fifty thousand tons per year |
| No. of Production Lines | Above 10 |
| Contract Manufacturing | OEM Service Offered; Design Service Offered |
| Product Price Range | High; Average |
Send your message to us
Magnesite Brick MZ89
- Ref Price:
-
$561.36 - 686.10
/ m.t.
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 10 Tons m.t.
- Supply Capability:
- 1000 Tons Per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
