Led Strip Light DC 12/24V / 5V SMD 5050 RGB+W 60 LEDS OUTDOOR
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2000 m
- Supply Capability:
- 1000000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1). Product Description:
1). Products Name: Led flexible strip light,DC12V Led strip light, AC220V Led strip light, etc.
2). Input voltage (V): 85-265V AC
3). Output Voltage (V): DC12V or DC24V or AC220V, AC110V
4). SMD Type: SMD3528, SMD5050, SMD2835, SMD3014, SMD5630, SMD5730,SMD335,
5). Power Consumption Per Piece: 0.08w forSMD3528, 0.24w for SMD5050, etc. 0.10wfor SMD2835, or 0.20w for SMD2835, 0.5Wfor SMD5730, etc
6). LED Qty per meter: 30 LEDs/m, 60 LEDs/m, 96 LEDs/m,120 LEDs/m, 240 LEDs/m, others available.
7). Width: 4mm, 5mm, 6mm, 8mm, 10mm, 12mm widthPCB board, White PCB Board or Yellow PCBBoard, Black PCB Board, etc.
8). Color Temperature (CCT): Warmwhite:2800-3500K, Natural white:4000-5000K, White:6000-7000K, Cool White:8000-15000K, other customized color available.
9). Emitting Color: Warm white, Natural white,White, Red, Green, Blue, Yellow, Pink, Purple, RGB.
10). Power per meter: 4.8W/M, 7.68W/M, 9.6W/M,3.6W/M, 7.2W/M, 14.4W/M, and others
11). Luminous Flux ( Lumens ): 4-5LM/pcs, 5-6LM/pc, 6-7LM/pcs,7-8LM/pcs, for SMD3528, and 11-13LM/pcs, 13-15LM/pcs, 16-18LM/pcs, 18-20LM/pcs, for SMD5050, etc.
12). Waterproof Type: IP20, IP22, IP44, IP54,IP65, IP67, IP68, Non-waterproof, PU glue waterproof or Epoxy glue waterproof, Better silicon waterproof, Hollow tube waterproof, PVC tube with silicon inside waterproof, Phosphor Colourful Waterproof.
13). LED Chip Brand: Epistar, Brightlux, we do notuse Chinese Chips
14). Chip Pcs: 1 chip, 3 chips.
15). Certification: CE-EMC,CE-LVD, RoHS, CCC ,UL, FCC, RoHS, UL, ERP.
16). Drive Current Per Piece: 16mA, 18mA, 20mA,58mA, 60mA, 62mA, etc,
17). Power Factor: >90%
18). CRI (Ra>):80 Ra, others available.
19). Operating Temperature (℃): 40 to +50 degree Celsius
20). Life-span (Hour): 30000 ~ 50000
21). Lamp Body Material: Copper
22). Place of Origin: Shenzhen, China (Mainland)
23). Brand Name: CMAX
24). Model Number: KU-3528-5050-60D, many differenttype of models, please refer to our pricelist
25). Warranty: 1,2 and 3 years and 5 years
26). Beam Angle: 120 degree
27). Packaging Details: 1 meter/roll, 3meters/roll, 5meters/roll, 10 meters/roll, 40 meters/roll, etc,
28). Standard export package.
29). Light Decay: less than 3% after 1000 hoursconstant work
30). PCB Board Color: White or Yellow (Brown)
31). Layer thickness: single pcb board, double pcb board.
- Q: LED chandelier (ceiling lamp), the band controller does not synchronize, what should I do?
- Open the controller, find a large capacitor inside, with a resistance capacitance to dozens of European power release, as long as a few seconds to let go. Reconnect to the power supply.
- Q: The brightness of 220V lights with LED power up before optical switch can adjust the lamp with the LED?
- The brightness of the LED light band cannot be adjusted.The high voltage light belt is made through IC or resistance capacitance step-down, and the security is very poor. Easy to cause fire and safety accidents, or use low voltage safety.
- Q: How to install the car LED lamp belt?
- Every meter has a "hinge shear" mark, only in the mark must be cut, scissors or scissors will lead to one meter is not bright! Some will play a bit biased when marking, it is best to carefully look at the next sign of the status of the Department, according to the center did not connect to the local shear can be. Look carefully and you can see.
- Q: How to make the effect of LED light belt fixed?
- This has something to do with the controller. If you know the principle of his chip, it's an effect to short-circuit a PIN directly
- Q: Can the light belt be connected directly to the alternating current of 220 volts? Is it necessary to install a converter?
- Can the light belt be connected directly to the 220 volt alternating current, depending on the specific type?.The lamp belt is divided into a high voltage lamp belt and a low voltage lamp belt, and the high-voltage lamp belt is provided with a conversion module, and the utility model can be directly connected with the 220V voltage. The low-voltage lamp belt is driven by a direct current and must be connected with the converted DC power supply.
- Q: LED lamp belt installation uneven lighting, how to do?
- The light belt is one side luminous, and then the coil packing will distort. Ceiling inside the space is narrow, not fixed, so uneven lightThis problem will come with all the lights on.
- Q: What's the LED band?
- LED lamp with patch 352860 beads, 9 yuan a meter, 5050 patches, 60 beads, 22.5 yuan a meter, waterproof two yuan
- Q: Connect the LED light belt to change the electric wire!! the result electrify! The electric wire heating, the interface is electric hot, how to return a responsibility?
- Changed the wire and wire heating, mainly the current rating of the wire is too small, that is to say, the line is too thin. The main reason for the junction fever is not connected, not tight, so a contact resistance, resulting in fever.
- Q: How many meters does the LED flash band need? A controller?
- Different LED lights LED number is not the same, the power will not be the same, the general number of led more, the whole LED light belt power is greater, the controller can bear the length will become shorter!Generally speaking, if the number of LED in your Flash belt is 60, 0.2w/led., then the meter is 12W, and the 10 meter is 120W.The controller is used for receiving signals, and the number of meters does not matter. As long as there is sufficient switching power supply to the lamp band, it is possible to meet the power requirements of the parallel light band. Or, in a certain range of load, you can then connect the signal amplifier, you can use a controller to connect the effect of numerous lights!In addition, the general controller will be equipped with wireless remote control, remote control can control the scope of the band is the main factor to limit the length of the band!
- Q: How many volts does the LED light belt need to start?
- General LED lamp belt is 12V, 3 beads and a resistor in series, a lamp minimum starting voltage of about 3V, almost 3 9V, although it is lit up, but the brightness is very low, want to achieve higher brightness or to 12V, then 9-12V lamp belt between the lights. Of course, some factories also have 24V, and the same principle.
Send your message to us
Led Strip Light DC 12/24V / 5V SMD 5050 RGB+W 60 LEDS OUTDOOR
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2000 m
- Supply Capability:
- 1000000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches