Aluminium alloy SMD5050 RGB led bar light
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description
Aluminium alloy SMD5050 RGB led bar light
LED Aluminum bar , widely used in jewelry, star hotel, high-end clubs, museum, professional windows, counters and
other key lighting place, it is an alternative replacement to traditional old halogen and other light.
Product superiority:
1. High brightness, adopt high brightness SMD5050 as light sources
2. Well Radiates, PCB board and Out shell, all made with Aluminum materials, low heat and easy output
3. Low power and less light decay: energy saving can reach into 90% for you
4. Without any radiation, non-UV / Infrared, and heat radiation, environmental friendly
5. Outer covering with aluminum alloy, and surface anodizing,very unique design with high level
6. Install easy, the unique structural desing, easy installation, all person not professional do well
Product Feature:
1. LED type: High brightness SMD5050
2. Color available: White, Warm white, Cold white, RGB
3. Color temperature: 2500~6500K
4. Viewing Angle: ≥120°
5. LED quantity: 60leds/m,72leds/m.
6. Luminous Flux: 60leds:950~1000Lm;72leds:1150~1250Lm.
7. Voltage /Power: 12VDC , 14.4W/17.5W
8. Waterproof : IP65
9. Working temperature:- 35℃~+60℃
10. Storing temperature: -40℃~ +70℃
Product Picture:
1. Shipping by EMS, DHL, UPS, FedEx, sea shipping and air shipping according to customers' requirement;
2. Normal delivery time: 7-10 working days.
1. Competitive price;
2. Our products are under strcit quality control ;
3. Large producing capacity : 80,000pcs/month;
4. Any quantion willbe replied as soon as possible.
5. Professional LED light supplier with more than five years experience;
1. Your inquiry will be replied within 12 hours;
2. Any question during using ,we always reply in time;
3. All products are tested and packed well before delivery;
4. We will arrange the fast shipping for you;
5. Your private information will be well protected.
- Q: LED lamp installation drawing, which 5050 and 5730 are good?
- If the lamp with a lamp the same 5730 meters in length, then will light if only the same power so 5050 light will be more uniform, because he amount of more dense arrangement
- Q: LED light is still a weak light after the switch is closed. What's the matter?
- LED has normal light after power failure. The solution is...1, with a grounding wire, you can understand?2, test pencil, measure will be changed to FireWire, FireWire disconnection switch circuit3, in the case of unprofessional, use method 1
- Q: What is a light belt?
- The light belt is the abbreviation of the LED light belt. Most people are not accustomed to the noun when they say it is too long, so the LED in front is omitted. It is called the light belt directly. In this way, the band with the name also includes a lot of big, second line, big three lines, round, second line and so on, the direct use of wire to connect LED, instead of FPC or PCB old band, of course, also includes flexible light band and hard light belt.
- Q: What is the wattage of the LED lamp with one meter?
- Each band must be equipped with a dedicated plug (plug with a transformer); when connected, be sure to remove the transparent plastic cover, and then try the lights and then cover. It must not be connected directly with a cover, so it is easy to short-circuit!
- Q: Why is the LED patch band always flashing?
- LED patch lamp belt needs DC constant voltage power supply. If the AC transformer is switched on, it will flash.
- Q: LED lamp with a whole such as bad if not how to detect the lamp with a lamp quality
- Very simple, 2 battery 3V, each lamp does not light the ends of test, bad, LED is also a diode, try again when the reverse voltage is equal to the open circuit test for other beads, beads are measured
- Q: What kind of power supply should the LED light belt be equipped with?
- DC current source output current is constant, when changes in the number of LED lamps series the automatic voltage regulation, and output current in a certain range remains unchanged, if there is a LED lamp open circuit fault occurs when the local pressure at both ends of the breakdown fault LED lights, LED lights, the road is short and other light work as usual. When the LED current in series is not the same, it will cause uneven brightness.
- Q: 60 bead LED lamp with power supply, can be used on 120 bead LED lamp belt?
- If the power of the single bead is the same, the total power of the 120 bead light band is more than twice as much as that of the 60 bead lamp, and the power of the original 60 bead will be burnt out.
- Q: What are the features of a LED lamp?
- LED light source has the advantages of no UV and infrared radiation, and can avoid the pollution of mercury fluorescent tube rupture overflow and other substances, Recyclable waste lamp recycling; LED distributed on the strip plate independently, increasing the volume of light source, beautiful appearance and low cost; through the reasonable arrangement of the strip plate, overcomes the LED light angle limitation, achieves the three-dimensional effect, the lamp light point. The utility model can completely replace the traditional tungsten crystal lamp and energy-saving lamp crystal lamp, the brightness can be comparable with the energy-saving lamp, energy-saving lamp color temperature is easier to control, more energy, crystal lamp can replace the other light source.
- Q: 5730led hard lamp, with one meter long and 72 beads, what is the power?
- In fact, hard light with more use of low voltage, 12V or 24V, the use of resistance to limit the current, then add the actual resistance loss, more than 40W, but with such a high light power is not enough, because the heat problem, up to 20W, safety should be controlled in 10-15W.
Send your message to us
Aluminium alloy SMD5050 RGB led bar light
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords