Led 110V 220V Smd5050 Waterproof Strip Light Led Flexible Led Strip Led
- Ref Price:
-
$0.93 - 4.02
/ roll
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1 Roll roll
- Supply Capability:
- 1000000 Rolls Per Month roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Introduction
LED 110V 220V SMD5050 waterproof Flexible led strip, led light strip, strip light led , LIGHT LED Strip, Strip LED,LED Flex Strip, LED Tape, LED Ribbon.
High voltage led flex .3rd Generation LED strip light
LED 110V 220V SMD5050 waterproof Flexible led strip, led light strip, strip light led
Specification
Voltage | AC100-120V or 220-240V (50-60Hz) |
Total Power | 350W |
Color | R/Y/B/G/W/WW/RGB |
Length | 50m/reel |
LED sources | SMD5050 |
LED Qty | 60pcs/meter |
IP grade | IP67 |
Cuttable unit | every meter |
Lifespan | 45,000 hours |
Warranty | 2 years |
Certifications | CE and RoHS |
Advantages
220V high voltage led strip is an "updated version" of the low voltage strip.The use of DC 12V led strip has to be with a miniwatt adapter,and its best length is 5 meters.For the projects,this is very inconvenient. Now,our high voltage strip could solve all the problems.100 meters in one line without connection,and no signal amplifier needed. Cost-saving on power supply and installation,easy to transport and install.
Features
1. Can be run in 220V or 110V without extra adaptor or power source.
2. Can be max run 100 meter and also be cut or connected in every meter.
3. PVC tube provides good waterproof and can be used both indoor & outdoor.
4. 3528 & 5050 LED provide greater brightness compared to 3mm LED used in rope light.
5. Solid-state for high vibration resistance and good flexibility for any shape.
6. Independent LED, one led broken will not affect next leds (3538 double row and 5050).
Installation Diagram
1.Install:Take out the package,make sure it comes with necessary accessories,which should include:fixing clips,middle plugs,end caps,head wires.fix the strips with clips onto where you need,put the wire into sockets to light the strips.
2.Cut: Please cut the strips only along the cutting mark on the PCB,don't cut at random.Block up the end with end caps,seal with enough glue to make sure it is still waterproof.
3.Connect: Plug the head wire into a strip to conduct the electricity,or plug a middle plug into the ends of two separate strips to connect them into a long strip,after well connected,seal all the plugs with enough glue.
Application
1) Architectural decorative lighting
2) Archway, canopy and bridge edge lighting
3) Amusement park, theater and aircraft cabin mood lighting
4) Emergency hallway lighting
5) Auditorium walkway lighting
6) Stairway accent lighting
7) Concealed lighting
8) Backlighting for signage letters
9) Channel letter lighting
10) Emergency exit path lighting
11) Cove lighting
Advantage of Flexible High Voltage SMD LED Strips.
1.Chip:
All the chips BET adopt is from Taiwan Epistar brand with 16-19LM, with uniform light and low light decay with high quality and long life span, One years Guarantee,CE&ROHS approved.
2. PVC
BET Strips use high transparent plastic material, It can bear high temperature and with strong anti-ultraviolet, While most of the other normal strips only adopt muddy plastic material, this makes strips not so bright and will be easily turn yellow after short time using.
3.Technology:
The LED and resistors BET mounted is with vertical mounted, while the others is with horizontal mounted.
This will be not so easy to fall off with the mounting when make installing.
4.Copper Wire:
BET Adopt pure cooper wire, With super conductivity, Higher brightness and more uniform light.
While the common one only use the iron wire with low material cost and poor conduction.
5.PCB
The PCB width we adopt is with 8MM,While others is only with 5MM,
wider PCB is better for heat dissipation and protect the LEDS.
6.Craft
BET adopt advanced machine and technology for every process,
you can see our BET’s PCB inside is flat while other’s is curly.
About us
1. Your inquiry related to our products or prices will be replied in 24 hours .
2. Professional led manufacturer both on led component and application product .
3. Professional support on technology and distribute direction .
4. Well-trained and experienced staffs to answer all your enquires in fluent English .
5. Distributorship are offered for your unique design and our current models .
6. Protection of your sales area,ideas of design and all your private information .
7. All the products must through 10 hours aging before delivery to ensure the quality .
8. 4 assembly lines, capacity of 500000pcs led lights in a month .
9. Unique appearance design and ideal recommended services are offered .
10. OEM&ODM are welcome , any your customized lightings we can help you to design and put into product .
11. On time delivery and prompt response to your enquiry .
12. Satisfied after-sales service,welcome all requires and we will reply promptly .
Packaging & Delivery
Package:
1 x Box
Delivery:
Shipping Service | Estimated Delivery Time |
DHL | 2-8 business days |
FedEx | 3-8 business days |
TNT | 2-10 business days |
UPS | 1-7 business days |
EMS | 6-14 business days |
ePacket | 7-12 business days |
China Post Air Mail | 7-15 business days |
China Post SAL | 14-30 business days |
By sea | 30-40 business days |
1. 3-10 business days for Sample Orders; 7-40 business days for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address.
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q: LED color lamp does not take controller, can you still change color?
- The parameters of the ordinary lamp are approximately the same. Let us introduce its parameters:1) work voltage:The voltage of the LED lamp is 220V, 110V, 36V, 24V, 12V, several kinds2) operating temperature:Because lights are usually used in the outdoor more, so this parameter is more important, the temperature requirements are relatively high, in general, we require outdoor temperature at -40 degrees +60 degrees can work.
- Q: How to solve the problem of LED lamp out of light effect?
- The light does not come outLED light belts usually have a luminous angle of only 120 degrees, and some light grooves are too high for us to see the light produced by the LED band. For this reason, the LED lamp can be padded high, so that the distance between the lamp belt and the lamp slot is about 4-125px, or that the belt is attached to the side wall.
- Q: Does the LED light go on for a long time? Do you have any plastic smell?
- The LED light must be suitable for interior lighting. There is no plastic taste.
- Q: How much is the band? What's the color of the lamp?
- 10-12 yuan a meter, buy more words, 6-8 yuan. One by one. There are no brands. There are many markets.
- Q: 5050LED lights with 14.4W/1 meters, power 12V-360W can take 25 meters? I mean RGB, if it's connected to the color
- For the second problem, 360/12 = 30A, the current large, general electric wire is unable to load the current so high, and you want to see in the light there is no equipment line, if not, it should be every meter to connection to the power supply, if any, every four to five meters should also be wiring to the power supply voltage, so as to ensure the basic stability of the position
- Q: The difference between high voltage and low voltage LED light belts
- Low voltage lamp with 12V and 24V, 12V low voltage work, step-down instability, leading to the front and rear light uneven.24V step-down stabilization. Uniform brightness. Long service life. It is recommended to use 24V light belt.
- Q: The new LED lights are always flashing. What's the matter?
- If your light belt is directly connected to the 220V power supply, this problem occurs, it must be the high voltage plug, the internal AC to DC converter is broken.
- Q: What kind of material does the light belt have?
- Later developed into a flexible circuit board is used FPC as carrier, because of its simpler processing technology, quality is easier to control, longer life, higher brightness and color and gradually replaced the earlier process, become the trend.Because the lamp belt is generally welded LED, so there are many LED lights, but because the noun is too long and simplified into a band
- Q: Troubleshooting of LED light belt
- Mainly from the following aspects to identify:1, look at solder joints. Regular LED lamp manufacturers with LED light band produced by SMT patch process, produced by solder paste and reflow soldering. Therefore, the solder joint on the LED light band is smoother and the solder flux is not much, and the solder joint is in an arc shape extending from the FPC pad to the LED electrode.2, look at the quality of FPC. FPC points of copper and rolled copper two kinds, copper plate copper is protruding out, look carefully, from the pad and FPC connection to see. The rolling copper is closely connected with FPC, and can be bent at any time without the phenomenon of pad falling off. If the copper plate is bent too much, the pad will fall off and the temperature will be too high to cause the pad to fall off.3. Look at the cleanliness of the surface of the LED lamp. LED band produced by SMT process, its surface cleanness is very good, can not see what impurities and stains. Hand soldering process to produce a cottage version of the LED lamp band, no matter how the surface cleaning, will remain stains and traces of cleaning.4. Look at the packing. The regular LED lamp belt will be packed with an antistatic coil tray, 5 meters roll or 10 meters roll, and the outer packing will be sealed with anti-static moisture proof packing bag. LED version of the cottage version of the band with recycled reel, there is no anti-static moisture-proof package, a closer look at the reel, you can see the appearance of cleaning labels left traces and scratches.5. Look at the label. Regular LED lights, bags and rolls have printed labels, not printed labels.6, look at the attachment. LED lamp with formal will attach instructions and specifications in the lights inside the boxes, also equipped with LED lights with a connector or card holder; not the accessories and LED lamp with copycat version of the box, because some manufacturers still can be saved.
- Q: What's the LED band?
- The light belt is the abbreviation of the LED light belt. Most people are not accustomed to the noun when they say it is too long, so the LED in front is omitted. It is called the light belt directly. In this way, the band with the name also includes a lot of big, second line, big three lines, round, second line and so on, the direct use of wire to connect LED, instead of FPC or PCB old band, of course, also includes flexible light band and hard light belt
Send your message to us
Led 110V 220V Smd5050 Waterproof Strip Light Led Flexible Led Strip Led
- Ref Price:
-
$0.93 - 4.02
/ roll
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1 Roll roll
- Supply Capability:
- 1000000 Rolls Per Month roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
