Led Strip Light DC 12/24V / 5V SMD 5050 RGBW 60 LEDS PER METER OUTDOOR IP65 PU GLUE
- Loading Port:
- Yantai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 1000000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1). Product Description:
1). Products Name: Led flexible strip light,DC12V Led strip light, AC220V Led strip light, etc.
2). Input voltage (V): 85-265V AC
3). Output Voltage (V): DC12V or DC24V or AC220V, AC110V
4). SMD Type: SMD3528, SMD5050, SMD2835, SMD3014, SMD5630, SMD5730,SMD335,
5). Power Consumption Per Piece: 0.08w forSMD3528, 0.24w for SMD5050, etc. 0.10wfor SMD2835, or 0.20w for SMD2835, 0.5Wfor SMD5730, etc
6). LED Qty per meter: 30 LEDs/m, 60 LEDs/m, 96 LEDs/m,120 LEDs/m, 240 LEDs/m, others available.
7). Width: 4mm, 5mm, 6mm, 8mm, 10mm, 12mm widthPCB board, White PCB Board or Yellow PCBBoard, Black PCB Board, etc.
8). Color Temperature (CCT): Warmwhite:2800-3500K, Natural white:4000-5000K, White:6000-7000K, Cool White:8000-15000K, other customized color available.
9). Emitting Color: Warm white, Natural white,White, Red, Green, Blue, Yellow, Pink, Purple, RGB.
10). Power per meter: 4.8W/M, 7.68W/M, 9.6W/M,3.6W/M, 7.2W/M, 14.4W/M, and others
11). Luminous Flux ( Lumens ): 4-5LM/pcs, 5-6LM/pc, 6-7LM/pcs,7-8LM/pcs, for SMD3528, and 11-13LM/pcs, 13-15LM/pcs, 16-18LM/pcs, 18-20LM/pcs, for SMD5050, etc.
12). Waterproof Type: IP20, IP22, IP44, IP54,IP65, IP67, IP68, Non-waterproof, PU glue waterproof or Epoxy glue waterproof, Better silicon waterproof, Hollow tube waterproof, PVC tube with silicon inside waterproof, Phosphor Colourful Waterproof.
13). LED Chip Brand: Epistar, Brightlux, we do notuse Chinese Chips
14). Chip Pcs: 1 chip, 3 chips.
15). Certification: CE-EMC,CE-LVD, RoHS, CCC ,UL, FCC, RoHS, UL, ERP.
16). Drive Current Per Piece: 16mA, 18mA, 20mA,58mA, 60mA, 62mA, etc,
17). Power Factor: >90%
18). CRI (Ra>):80 Ra, others available.
19). Operating Temperature (℃): 40 to +50 degree Celsius
20). Life-span (Hour): 30000 ~ 50000
21). Lamp Body Material: Copper
22). Place of Origin: Shenzhen, China (Mainland)
23). Brand Name: CMAX
24). Model Number: KU-3528-5050-60D, many differenttype of models, please refer to our pricelist
25). Warranty: 1,2 and 3 years and 5 years
26). Beam Angle: 120 degree
27). Packaging Details: 1 meter/roll, 3meters/roll, 5meters/roll, 10 meters/roll, 40 meters/roll, etc,
28). Standard export package.
29). Light Decay: less than 3% after 1000 hoursconstant work
30). PCB Board Color: White or Yellow (Brown)
31). Layer thickness: single pcb board, double pcb board.
- Q: How about the power of the LED lamp?
- LED has different chips that cause different currents. For example, there are 0.011A, 0.015A, 0.028A, and so on. It should be said that different batches of LED chips will have different values of current, so each batch should be measured by an instrument
- Q: Excuse me, what's the power consumption of the LED light belt?
- Different light belt power consumption is different, the length of the lamp belt is different, and the power consumption is different. The common power consumption per meter is 1--5W. Suppose you're using 5W, and with 10 meters, the total power consumption is 50W. If you use 2W, 10 meters is 20W.
- Q: Can the LED light band be used alone in the open air? Is it waterproof when it rains?
- The power supply needs to be protected separately, and the life of the LED led belt is longer, and the waterproof level is certainly very good. The light can be wet directly, but the power needs to be shielded. Bear in mind; hope to adopt
- Q: Embedded LED lights with notches generally go deep enough
- Under normal circumstances, are 810, two widths of the band shape, but there is better aluminum, hard light bar, then there are about 18 wideSo first you have to figure out the model of your lights, it is best to have pictures to understandIf not, then use the maximum range of 18 wide, the deepest depth of about 15, this is the largest range of light belt
- Q: Can the light belt be put on the plasterboard directly?
- Yes, just fix the lights and prevent them from falling off.The band refers to the LED lamp with a special process welding on copper or ribbon flexible circuit board, and then connected to the power supply light, because of its luminous shape such as a light band named.
- Q: How do I connect the two LED light bands?
- The low voltage is connected in parallel with the position of the transformer, and the two terminal interfaces are connected at high voltage, and the common wires are connected in parallel to one switch.
- Q: Does the LED light band save energy?
- LED lights also have different luminous efficiency, high quality light-emitting efficiency, quality inspection of low luminous efficiency, may not be more energy-saving than three primary color T5 energy-saving lamps. Can not be generalized.
- Q: What kind of power supply should the LED light belt be equipped with?
- LED lights should be configured with dedicated DC power supplies.DC power supply is divided into two kinds of voltage source and current source;In general, a fixed number of LED lights can use a DC voltage source, the voltage source is relatively simple, many varieties, the corresponding LED lamp group should work in parallel. If the LED lamp group is connected in series, once one of the circuit breaks, the fault will be caused, so the light is not on.
- Q: How can I make sure it's the 2853led band?
- See lights inside the beads size smaller, the price is cheap, 2835 lights.
- Q: What's the brightness of the LED light band? Can I use it for lighting?
- No, the light belt is auxiliary lighting. Mainly to create a spatial atmosphere.
Send your message to us
Led Strip Light DC 12/24V / 5V SMD 5050 RGBW 60 LEDS PER METER OUTDOOR IP65 PU GLUE
- Loading Port:
- Yantai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 1000000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords