LED STREET LIGHT CNBM 200W WITH LIGHT EFFICIENCY 130LM/W
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LED Street Light 200W
one new invent of Lighting module ,which is perfect for installation on street to replace all the old traditional lighting
Application
LED street light can be applied to highways, pedestrian roadways,streets, parking lot, garden,playground, sport area, campuses etc.
Parameters
Model | H200 | ||
Power | 200W | ||
LED Quantity | 96pcs×2W | ||
Input Voltage | AC 100~277V;50/60HZ | ||
Input current | 1.82A(110V),0.91A(220V) | ||
PF | ＞0.95 | ||
CRI | ≥70 | ||
Beam angle | 140°×60° | ||
CCT | 3000K | 4000K | 5000/5700K |
Luminous flux(±10%) | 20000 lm | 22000 lm | 24000 lm |
Dimension | L630*W328*H108mm | ||
IP rating | IP66 | ||
Material | Aluminum alloy | ||
Anti-corrosion grade | WF2 | ||
Working temperature | -30 to +50 ℃ | ||
Storage temperature | -40 to +70 ℃ | ||
Working humidity | 10% to 95% | ||
Warranty | 6 years | ||
Features of Led Street Light
1. Module Patented design ,prevents debris build-up;Umodularization has better heat dissipation system,keep the temperature of the LED chips and the driver in the safety range,so ensure the lamps long lifespan and low lumen attenuation.
2. Use waterproof wire connector,wire connection become easier ,much more convenient ;use a large ring seal for the lens, sealed and reliable;Module and connection design can optimize construction and assembly,allows for easy maintenance,upgrade and SKD for local assembly.
3. Professional design for the luminous intensity distribution, meet all kinds of lighting requirements,overall spot is rectangular.
4. Professional design with flexible installation ability, installation angle can be adjusted among -5°,0°,5°,10°,15° without changing the lamp post. The installation position of different angles are visible, convenient for installation and adjusting the lamp’s angle .
FAQ:
Q: What is your Led Street Light ?
A: The luminaire
Q: What is the Power Factor of your LED Light ?
A :> 0.9
Q: What is the Color Rendex Index ?
A: RA 70,RA80
Q: What is the light efficiency of CNBM Led Panel Light ?
A: 90LM/W upto 140LM/W
Q:Which kind of LED Chips you are using ?
A: BRIDGELUX OR CREE
Q: What is your LED Warranty Terms ?
A: 3 YEARS - 10 Years
Installation instructions
- Q: How to connect the lightning arrester of LED street lamp?
- Return to a proposition. How to ground1, the lamp metal tube and the strip at the bottom of the rod grounding terminals properly connected, pay attention to the ground terminal can not save, ensure that the terminal is connected properly;2, lamp posts of movable tubes, bushings and other loose place, must be greater than 16mm woven belt two connections;3, the lamp holder and the lamp post connection must also be ditto;4. The lamp holder must have grounding terminals, and the grounding terminals must be properly connected with the lamp holder and the braid of the pole.
- Q: For the LED street light distribution, is it better to use a lens or a reflector?
- According to personal needs, the last time I went to a lighting shop called Zhongshan Ming lighting shop to buy lights, but also asked the question, but do not remember what the salesman said
- Q: How is the rated current of the LED street lamp holder?
- For example, the rated power of the lamp is 220W, the rated input voltage is 220V, and the power factor is 0.9Then the rated input current is 220W/220V/0.9=1.11A
- Q: Do ballast ballasts need to be used for starting the LED street lamp?
- LED requirements are constant current power supply, some can also use switching power supply, but the cost is relatively high
- Q: How long does the general power LED power supply cycle last? Such as street lights, power supplies, 150W, 180W?
- See what voltage input, what are the requirements?.If it is me, usually 40 days to get the prototype. 220V input, 56V, 3a out. Without special requests.
- Q: How much is the price of the LED street lamp?
- Photovoltaic street lamp environmental protection, safety, long life, can be made according to user requirements.
- Q: How to distinguish whether the LED lamps glare seriously, whether there is a standard?
- There are 4 main reasons for the glare caused by LED lamps.(1) brightness factor of light source: the higher the brightness, the more obvious the glare.(2) the position of light source factor: the closer to the line of sight, the more obvious the glare.(3) the appearance, size and quantity factors of light source: the larger the apparent area, the more the number of light sources, the more obvious the glare. (4) ambient factors: the lower the brightness of the environment, the lower the brightness of the eye adaptation, the more obvious glare.
- Q: Compared with LED street lights, what are the advantages of graphene street lamps?
- And if compared to ordinary sodium lamp, but also can save energy 70%. Thus, on the basis of the same amount of electricity, graphene street lighting will be higher, and this benefit can also benefit drivers traveling on the road. Almost all of the common LED lamp has a "black light", but the street surrounding light, but dark; and graphene Street due to changes in brightness and light, can avoid this effect of road crossing chiaroscuro "".
- Q: LED street light dedicated drive power 98W14 string 7, and ask 14 string 7, and what does that mean?
- 14 strings of beads strung up voltage at around 48, indicating that the LED lamp is 48V system, LED lamp voltage is common for 12V, 24V and 48V are increased in order to reduce the current voltage is such a high efficiency lamp, 7 and 14 series and beads such power is 98W and you can have 14 strings of 10 and then the lamp is 140W street lamp, street lamp is 14 If you design on the design so in the production of aluminum substrate is designed to be 14 on the aluminum plate (the aluminum substrate is a circuit board, the welding beads in the above).Generally common street lamps recommend using 24V system (less than 40W suggested using 12V), because the voltage is relatively low, so relatively safe, but also the most street accessories, easy to buy.
- Q: High frequency jet lamp, LED lamp, xenon lamp, which is suitable for street lamps
- High pressure sodium lamp light control, high luminous efficiency, long life, high color, the color is very suitable for 4000K~5000K lamps, but a relatively small enterprise effort in developing high performance and stability of the ballast, on the other hand, because of government support for the LED industry, so its application in the street did not get attention and promotion proper.
Send your message to us
LED STREET LIGHT CNBM 200W WITH LIGHT EFFICIENCY 130LM/W
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
