Hydraulic FRP Profile Pultrusion Machines with Good Price
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 20 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Hydraulic FRP Profile Pultrusion Machines with Good Price
Product Description:
Hydraulic type pultrusion machine is controlled by PLC, which adopts hydraulic pressure type to-and-fro as traction force with pneumatic length-fixing cutting. The machine can produce various FRP Pultrusion Profiles include square tubes, rectangular tubes, round tubes, angles, I-shapes, channel, rod, and rod fiberglass pultruded profile . The line consists of roving racks, resin bath, mould calibrating table, to-and-fro traction machine, cutting saw, racks for finished products and control system.
Product Features:
1. The machine adopts auto PLC controlling with stable performance and high automation.
2. the machine uses piston pump with low noise and high system pressure. The motor is low power and save energy.
3. The hydraulic cylinder adopts Germany sealing components with good sealing property and without oil leaking or impregnating.
4. Temperature alarm device, the temperature of hydraulic system is under strict control.
5. we can design various shape moulds according to customer’s requirements.
Product Parameter:
Name | Hydraulic FRP Profile Pultrusion Machines with Good Price |
Brand | CMAX |
Weight | 4-9T |
Dimension(L*W*H) | 27M*2.8M*3.4M |
Power | 40KW |
Voltage | 380V |
Product Type | FRP Machinery |
Certification | ISO9001:2008 |
Appilication | Profile |
Raw material | Fiber Reinforced Plastic |
Place of Origin | Beijing, China (Mainland) |
Color | Selectable |
Warranty | 1 Year |
Time of Delivery | 30-45 days |
Product Pictures:
FAQ:
Question 1 : What is Pultrusion?
Answer : Pultrusion is a continuous low pressured molding process using fiber reinforcements and thermosetting resins matrices. The fiber reinforcements are drawn through resin bath or injected with resin in which all fibers are thoroughly impregnated with the liquid resin system. The wet-out fiber is formed to the desired geometric shape and pulled into a heated steel die. Once inside the die, the resin cure is initiated by controlling at precise elevated temperatures. The composite laminate solidifies in the exact cavity shape of the die, as it is continuously "pulled" by the Pultrusion machine, thus getting the name - Pultrusion.
Question 2 : Can any shape be pultruded?
Answer : Virtually any constant cross section can be pultruded dependant upon wall thickness and complexity of the cross section of the profile.
Question 3 : What are the most typical resins used in the Pultrusion process?
Answer : Most commonly utilized are standard thermosetting resins such as polyesters, vinyl esters, epoxies, phenolics and urethanes during the pultrusion manufacturing process. However, thermoplastic resins can also be utilized in the Pultrusion process.
Question 4 : What are the most typical reinforcements used in the Pultrusion process?
Answer : Typical reinforcements used are fiberglass roving, continuous strand mat, woven and stitched fabrics. Other reinforcing materials such as basalt fiber, carbon and aramid fibers, which are more costly, can be utilized during the Pultrusion process to increase the modulus / stiffness of the composite member.
- Q: What are the plastic finishing machines?
- Mechanical (machinery) refers to the general name of machines and institutions. Machinery is a tool that helps people to reduce their work difficulty or effort. Things like chopsticks, brooms and tweezers can all be called machines. They are simple machines. A complex machine consists of two or more than two simple machines. These more complex machines are usually called machines.
- Q: Who knows Guangdong province processed waste plastic particles Factory where. Thank you
- Guangdong is very large! Where is there, where is the friend? Guangdong is more than Shunde, the most prosperous town, I work here in Guangdong, Zhongshan Province plastic granulation machinery factory.
- Q: PPO plastic mold commonly used steel processing?
- Application range6 polyphenylene ether is high strength engineering plastics development 60s of this century, it has high mechanical strength and creep resistance; excellent electrical properties, high temperature to 120 DEG C, and in a wide temperature range, stable size, mechanical properties and electrical properties change little; absorption of water vapor is very small. Cooking. Widely used in electronic, electrical components, medical equipment, cameras and office equipment, and so onCommon problem7 injection molding process characteristics and process parameters of modified polyphenylene oxidePolyphenylene oxide (also known as: polyphenylene oxide) [PPO] has good chemical stability, low creep, aging resistance, and it is not easy to burn. Because of its good water resistance, polyphenylene oxide is widely used as an engineering plastic.The major disadvantages of polyphenylene oxide are: poor flowability of melt, difficulty in forming process, tendency of cross linking, expensive price, easy stress cracking and unstable impact strength.
- Q: How much does it cost to process disposable plastic bags?
- The package of blow molding machine, cutting machine, switchboard, mixing machine totaling about 120 thousand
- Q: How many venues will it take? How much does it cost?That's what recycling plastic bottles break. Sell again.What's the machine and how much does it cost? What should be done after breaking? If you make a semi-finished product, you can't sell it wellIs there any profit on this line?
- That requires a crusher, thousands of dollars range, the process depends on what you have to do with the material, as expected.
- Q: I want to make some plastic products. Thank you。 FiveThe four type: first, a one or two meter long, hard, but bent plastic tube. Then there's something like the front end of the syringe. And then a small plastic kettle. Finally, a small thing that can be secured to the mouth of the pipe.
- What other plastic pot instead of well, to know a few thousands of large plastic mold, many tens of thousands of large; if you need a lot of, clear their own requirements, I think there are many manufacturers are willing to do, your preferred OK.
- Q: now have no market quite suck me how to go find the market ask predecessors and friends hope that they can point out a way to thank you
- I'm from Guilin, Guangxi.I'm a commodity trading company. How many styles do you have?
- Q: What equipment? How much money do not.. at first. There are several sets of injection molding machine can be about 2... Mainly plastic injection molding. The ABS PA PE PP PVC... Etc. in this area. Please know that a friend told Kazakhstan. Thank you.
- 3. cooling tower or water cooler {if cooling pool is small, buy}The production material crushing and recycling of the 4. mill {}5. mould temperature machine {product on mold temperature requirements higher, buy}6. oven {dry on the material, it is recommended to buy directly installed on the machine, drying faster, floor type, because there are several kinds of materials, while drying, the temperature is not good control.7. blender {material color or when adding material}8., the mold should be loaded big gourd, small mold can buy a lifting trolley, a set of mold tools.
- Q: When the engineering plastics in the processing, because it is not often around breaking chip, tool and workpiece, not only affects the working efficiency, but also the workpiece surface galling, do not know can not think of a way from the cutting tool and cutting amount? Who can give me some good advice? Please.
- Angle of feed, generally use 60 degrees bevel angle, the amount of cutting does not exceed 1MM. Also, adjust the cutting speed.This answer is very good, the landlord can adopt.From: Xushui engineering vehicle network.
- Q: How do we calculate the cost?
- Four major matters needing attention in investment of recycled plasticsPlastic recycling is a sunrise industry, the country, not only the effective utilization of resources and protect the environment, reduce the white pollution, from 2004 recycled plastics market, considerable benefits, as a new way of friends, is the author contact situation (editor's note), there are many aspects should be prepared in the first period, not to fight the battle without. The main problems are concentrated in the following aspects:1, blind follow-upAccording to the renewable materials market in 2004 prices, had been recycled most of the people have a better income, as for friends, in the test stage, on the surface has the advantages of simple process, low equipment investment, the product basically in short supply, technology content is not high, ordinary people can do at the same time, the raw material is us around the most familiar things, everywhere, everywhere can buy. Rough calculation, such as waste 2000 yuan can receive, the product can sell 4000 yuan, absolutely profitable.
Send your message to us
Hydraulic FRP Profile Pultrusion Machines with Good Price
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 20 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
