High Quality Plastic Tubes for Aluminium Pipes Fitting in House
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
Description of Products:
CNBM PPR pipes are designed for Hot and Cold water supply and heating applications and it is suitable for different applications listed below:
• Hot and cold water supply in residential,
industrial, commercial & public projects
• Solar applications
• Compressed air systems
• Drinking water and liquids
• Watering systems for greenhouses & gardens
• Transportation of aggressive fluids
PPR Pipe Size:
PN10 | PN12.5 | PN16 | PN20 |
32*3.0 | 32*3.6 | 32*4.4 | 32*5.4 |
40*3.7 | 40*4.5 | 40*5.5 | 40*6.7 |
63*5.8 | 63*7.1 | 63*8.6 | 63*10.5 |
75*6.9 | 75*8.4 | 75*10.3 | 75*12.5 |
90*8.2 | 90*10.1 | 90*12.3 | 90*15 |
110*10.1 | 110*12.3 | 110*15.1 | 110*18.3 |
Specification:
Products name | Tee with Tap Connector Male |
Material | PPR |
Field of Application | Water |
Work temperature | -10℃-110℃ |
Packing | standard export package or customized |
Function | Kitchen, home, commercial, garden and general |
Place of origin | Hebei China(mainland) |
Brand | CMAX |
Application:
1) Cold and hot water systems of residence and commercial buildings
2) Transportation of industrial water supply and chemical materials
3) Pure water pipe system
4) Piping networks for rainwater utilization systems
5) Irrigation agriculture and horticulture systems
6) Transportation system of drinking water production
Product Feature:
1. High Temperature Resistance: the maximum sustained working temperature is up to 70°C , the maximum transient temperature is up to 95°C
2. Heat Preservation: low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe
3. Non-toxic: no heavy metal additives, would not be covered with dirt or contaminated by bacterium
4. Corrosion Resistance: resist chemical matters and electron chemical corrosion
5.High Flow Capacity: smooth interior walls and low friction result in low flow resistance and high volume
6. Excellent Flexibility: can be supplied in coil
7. Longevity: more than 50 years under proper use
Product Advantages:
1) Healthy, bacteriological neutral, conforming to drinking water standards
2) Resistant to high temperatures, good impact strength
3) Convenient and reliable installation, low construction expenses
4) Excellent heat-insulation property from minimum thermal conductivity
5) Lightweight, convenient to transport and handle, good for labor-saving.
6) Smooth inner walls reduce pressure loss and increase flow speed
7) Sound insulation (reduced by 40% compared to galvanized steel pipes)
Company Profile:
CNBM International Corporation (CNBM International) is the most important trading platform of CNBM Group Corporation, a state-owned company under the direct supervision of State-owned Assets Supervision and Administration Commission of the State Council.
CNBM International is highly recognized by its business partners and clients all over the world and has obtained rapid development under the spirit of win-win. We will carry on the mutual beneficial, innovative and revolutionary trading structure as we did before, create value for our employees, share holders and clients and benefit the whole society in our future development.
FAQ:
Q1：How Can I Get A Sample?
A1:You can get samples by communicate with our export sales.
Q2:How Long Is Delivery?
A2:Delivery time will be30-45days according to order quantity.
Q3:What Is The MOQ?
A3:MOQ depends on different items.
Q4:What Is Our Normal Payments Terms?
A4:Our normal payment terms now is: T/T, L/C or western union,paypal
- Q: The dishwasher behind my bar at work has a leak. The pipe that's leaking is Parker Parflex PP 3/8 plastic tubing that connects into a metal nut and brings clean water in. The pipe has a leak exactly where it meets the nut, so in theory I could cut off the cracked portion and then re-seal it to the nut. Can I cut it with wire cutters? Should it be sanded after I cut it? Do I use a teflon sealant? Thanks for any help!
- That should be a compression fitting. If it's a brass fitting then they are one time use. You can get a new brass fitting, cut the PP tube clean with a knife or a razor blade - be careful not to cut yourself please, then install the nut over the tube, slip the compression ring over the tube and if there's an insert that goes inside the PP, insert that. Then push the hose into the fitting and slide the nut and ring to the threaded portion of the fitting and tighten it. Be careful to tighten it enough to seal but not so tight you cut through the pipe again. It's likely the reason you have the leak in the first place is because someone overtightened it. OR you can simply buy a replacement hose. I'd prefer a wire braid shielded pipe. Stronger and made with a professional fitting on the end, one you don't have to mess with. My opinion, replacing the tube is the better idea. And they're not stupidly expensive either. Good luck with your project. '')
- Q: What is the maximum diameter of plastic tubes available?
- The maximum diameter of plastic tubes available can vary depending on the specific manufacturer and type of plastic used, but it can typically range from a few millimeters to several inches.
- Q: I know there are two kinds of plastic pipes: thermoplastic pipe and thermosetting plastic pipe. PPR what kind of plastic pipes do you have?
- Individuals do not feel where great harm, but also caused by bad habits.PPR no poison, a little basic chemistry knowledge, but also know that the chemical composition of PPR is not poisonous.
- Q: Do plastic tubes have any limitations in terms of flexibility or rigidity?
- Yes, plastic tubes do have limitations in terms of flexibility and rigidity. While some plastic tubes can be quite flexible, allowing for easy bending and manipulation, others may be more rigid and less flexible. The level of flexibility or rigidity depends on the type of plastic used and the manufacturing process. Additionally, plastic tubes may have a maximum bending radius beyond which they may deform or break. Therefore, it is important to consider these limitations when selecting plastic tubes for specific applications.
- Q: Can you eat coloured icy poles in the plastic tubes with braces??
- you can eat almost anything just like having no braces on but, try stay away from like caramels and red skins etc. like sticky stuff
- Q: Is the diameter of the plastic tube 20mm in diameter 18mm?
- 20mm diameter plastic pipes, aperture, 18mm market there are manyFirst of all, look at what material is plastic tubeIf it is PC plastic pipe outer diameter of 20 mm, diameter 18 mm, 1 mm is so kind, this kind of plastic pipe will generally have a spot, also can achieve the customized specifications, can also die if not die
- Q: Are plastic tubes suitable for electrical conduit systems?
- Yes, plastic tubes are suitable for electrical conduit systems. They are lightweight, easy to install, and provide excellent protection for electrical wires. Additionally, plastic tubes are resistant to corrosion, moisture, and chemicals, making them a durable and cost-effective choice for conduit systems.
- Q: It is for a plastic tube that goes from the engine of my motorized paraglider to the inlet of my new gas tank. The plastic is a little too tight and I can't warm it up with a flame because of gasoline that may still be in the engine.
- Then try going the other direction and freezing the smaller tube. That may make it shrink enough to fit.
- Q: I need to find a round, plastic jar that is 4 1/2 inches in diameter and 4 3/4 high. Does anyone know where I can find something like this?
- I'd bring a tape rule to your local grocery store.
- Q: Can plastic tubes be used for industrial applications?
- Yes, plastic tubes can be used for a variety of industrial applications. They offer benefits such as resistance to corrosion, chemicals, and high temperatures. Plastic tubes are commonly used in industries such as plumbing, automotive, manufacturing, and construction for fluid transportation, electrical wiring, insulation, and structural support.
Send your message to us
High Quality Plastic Tubes for Aluminium Pipes Fitting in House
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
