High Quality Black Silicon Carbide/SIC/Carborundum 90% Raw Materials for Refractory
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Black Silicon carbide/SiC/Carborundum 90% with high quality
1.Structure of Silicon Carbide Description
Black Silicon Carbide is produced with high temperature in a electric resistant furnace from a mixture of quartz sand and petroleum coke.
Black silicon carbide is typically used for working on cast iron ,non-ferrous metals, stone, leather, rubber, and other materials which requires sharp cutting characteristics. The mineral is also used widely as a refractory material and metallurgical additive.
2.Main Features of the Calcined Bauxite
Its hardness is between that of fused alumina and synthetic diamond and mechancial intensity of it is also greater than that of fused alumina. It is brittle and very sharp and has a certain degree of electrical and heat conductivity.
3.Main usage of the Calcined Bauxite
1.Grinding non-ferrous materials, rock, stone, leather, rubber, finishing tough and hard materials
2.Bonded abrasive tools, lapping and polishing
3.Widely used as a metallurgical additive and refractory material
4.Refractory
4. Calcined Bauxite Images
5. Calcined Bauxite Specification
Specifiction | SiC | F.C | Fe2O3 | Moisture |
SiC 86 | 86%min | 2.4%max | 2.0%max | 0.2%max |
SiC 88 | 88%min | 2.3%max | 2.0%max | 0.2%max |
SiC 90 | 90%min | 2.0%max | 1.8%max | 0.2%max |
SiC 92 | 92%min | 1.8%max | 1.7%max | 0.2%max |
SiC 93 | 93%min | 1.8%max | 1.6%max | 0.2%max |
SiC 95 | 95%min | 1.0%max | 1.3%max | 0.2%max |
SiC 97 | 97%min | 0.8%max | 1.2%max | 0.2%max |
SiC 97.5 | 97.5%min | 0.8%max | 0.9%max | 0.2%max |
SiC 98 | 98%min | 0.5%max | 0.5%max | 0.2%max |
6.FAQ of Calcined Bauxite
1). Q: Are you a factory or trading company?
A: We are a factory.
2). Q: Where is your factory located? How can I visit there?
A: Our factory is located in Ningxia, China. You are warmly welcomed to visit us!
3). Q: How can I get some samples?
A: Please contact me for samples
- Q: How much is refractory spraying coatings?
- This depends on whether you use the thin coatin or thick coating. Then it depends whether you use an aqueous coating or oily one. Usually thick aqueous coating is 2-3 dollars per kilogram. While the thin is six or seven dollars per kilogram. The oily coating is more than ten dollars. The prices obtained from the Internet is for reference only.
- Q: As for fireproofing material rock wool and glass wool, which one is better?
- Rock wool board and glass?wool?board are a kind of new construction thermal insulation material, it's widely applied in construction and has replaced traditional thermal insulation material to some degree. With the gradually deepening study of rock wool board, glass wool board, we can find that these insulation materials have advantages in many aspects but there are also many deficiencies, particularly there exists a lot of controversy about the impact on the human body. The production process of rock wool board and glass?wool?board usually includes: after melting in high temperature of rock or glass, inorganic fiber is produced by high-speed centrifugation equipment, and at the same time add binder,dust?laying?oil,silicone oil at certain proportion, then produce sheet material according to different requirements. It has good thermal insulation properties, mechanical?property, sound absorption characteristics, belong to incombustible?material and is cheap. In general, insulation, security and economy should not be contradictory, three aspects should be taken into account, balanced chosen and developed. Rock wool board and glass wool board and other such materials should be properly selected and applied to the appropriate structure, so that the choice of material will play their strengths and avoid their weaknesses.
- Q: how is the high-temperature flame-retardant fibre board?
- high-temperature flame-retardant fibre board is good decorative material. Hope it helps you.
- Q: What are the raw materials of refractory?
- Refractory is mainly resistant to high temperature and fire. Sic refractories are widely used in refractory. I hope my answer will be helpful to you.
- Q: Does anyone know what is a lightweight refractory material?
- The volume shrinkage is larger, and the corrosion resistance is higher at high temperature. A lightweight refractory material, used as thermal insulation material in industrial furnace and other thermal equipment, has poor wear resistance, weak mechanical strength and small volume density. Compared with ordinary refractory bricks, the lightweight refractory with low thermal conductivity has higher porosity.
- Q: how to classify Insulating Refractory ?
- We are glad to answer your questions! This one is professional. My advice is to go through relevant webs for reference.
- Q: What are the differences of ceramics and refractories? Is the ceramics belonging to refractories?
- The ceramics and refractories are different with the porcelain ceramic with high temperature of 1300℃ as household porcelain refractory. The porcelain refractory material of 1450℃ as the same as the aluminum oxide, kaolin, refractory clay and other raw materials demand the deployment ratio of the raw material the same as the temperature.
- Q: How to make the service life of refractory materials longer?
- Take acid resistant refractory materials as example: the atmosphere should be acidic atmosphere, if used in an environment whose temperature is 1900℃, it would exacerbate the loss of refractory materials, so don’t use overloaded. Second, select the appropriate refractory materials according to the environment. For example, if its operating temperature is 1800℃, generally speaking, the normal use of it according to the instruction of refractory materials would be fine.
- Q: For refractory, why is it necessary to store the first mixing materials for some time under proper moisture and temperature?
- It is mainly to remove gas form chemical reactions in the pug, give full play to plasticity and binding properties of combined, and store unburned?brick whose cememting agent is phosphoric?acid or aluminium?phosphate for some time under proper moisture and temperature. For example, to avoid the formed bricks in the initial stage of drying and firing form cracking due to hydration of calcium oxide. Mixing materials is to store the first mixing materials for some time under proper moisture and temperature in order to improve the evenness and moldability of pud, such as making the distribution of combined clay and water more even. The length of storing chiefly depends on the process requirements and the characteristics of blanks. For the producing pug of high temperature kiln furnitures, the storing time is longer. The function of storing mxing materials varies with different natures of blanks. For honeycomb ceramics, it is to fully digest calcium oxide in blanks. For storing magnesia brick blanks containing much calcium oxide, it should be stored for some time in proper humidity and temperature.
- Q: Does anyone knows which company produces the better refractory materials?
- A:Building Materials Company of Guangzhou: Near the Baiyun District, Baiyun District, Guangzhou Road, North Road. B：Guangzhou Research & Development Co., ltd.: Liwan District Fengyuan road No.90 in Guangzhou City C: Huitailong decoration materials Co., Ltd.：the 30th floor of No. 111 Pacific Center, Taikang Road, Yuexiu District Guangzhou City D：Guangdong metal materials company: Near Qishan Road, Tianhe District , Guangzhou city.
Send your message to us
High Quality Black Silicon Carbide/SIC/Carborundum 90% Raw Materials for Refractory
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
