Graphite Electrodes Amazon - Purity Graphite Electrode for Nipple Stretching
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Quick Details
Place of Origin: | China (Mainland) | Brand Name: | CMAX | Model Number: | JX-UHP |
Type: | Electrode Block | Application: | steel smelting | Diameter: | Dia200-700mm |
Length: | 1800-2200mm | Grade: | UHP (Ultra High Power) | Resistance (μΩ.m): | 11-13 |
Apparent Density (g/cm³ ): | more than 1.8 | Thermal Expansion: | 1.4-2.8 | Round Size: | Dia350x450 dia400x450 dia500x450 dia585x600 |
Square Size: | 400x400x400 400x400x500 400x400x600 900x540x260 | Bulk Density: | more than 1.8 | Product name: | uhp graphite electrode |
Dimensions: | Dia350x450 dia400x450 dia500x450 dia585x600 | Chemical Composition: | carbon and graphite |
Packaging & Delivery
Packaging Details: | standard package for exportation |
Delivery Detail: | 15-25 days after confirmation |
Technical Data | ||||||||
PROPERTY | JXRP | JXHP | JXUHP | |||||
1 | 2 | 1 | 2 | 1 | 2 | |||
Electric resistance | μΩm ≤ | electrode | 8.5 | 9.0 | 6.5 | 7 | 6.0 | 6.5 |
nipple | 8.0 | 8.5 | 6.0 | 6.5 | 5.0 | 5.5 | ||
Bending strength | Mpa ≥ | electrode | 8.0 | 7.8 | 11.0 | 10.5 | 11.0 | 10.0 |
nipple | 13.5 | 13.0 | 14.0 | 14.0 | 16.5 | 16.0 | ||
Elastic modulus | Gpa ≤ | electrode | 8.0 | 9.3 | 11.0 | 12.0 | 13.5 | 14.0 |
nipple | 13.0 | 14.0 | 15.0 | 16.0 | 14.5 | 18.0 | ||
Bulk density | g/cm³ ≥ | electrode | 1.56 | 1.52 | 1.62 | 1.60 | 1.65 | 1.64 |
nipple | 1.70 | 1.68 | 1.72 | 1.70 | 1.72 | 1.70 | ||
Ash content | % ≤ | electrode | 0.3 | 0.5 | 0.2 | 0.3 | 0.2 | 0.3 |
nipple | 0.4 | 0.5 | 0.2 | 0.3 | 0.2 | 0.3 | ||
C.T.E | 100-6/℃ ≤ | electrode | 2.8 | 2.9 | 2.4 | 2.4 | 1.5 | 1.5 |
nipple | 2.7 | 2.8 | 2.2 | 2.2 | 1.4 | 1.4 |
- Q: Thermal expansion coefficient of graphite
- Thermal expansion coefficient (100 degrees Celsius --600 degrees Celsius) diameter 200--500 graphite electrode body is not greater than 2.410 of the negative four times per degree Celsius
- Q: Why use platinum ferroalloy instead of iron as electrode?
- Its surface properties must comply with the characteristics of the additives so that they can be dispersed evenly.
- Q: Where is the graphite electrode scrap?
- Finally, a bright white Ar-ICP discharge is formed, especially like a drop of water droplets.
- Q: Electrolytic salt water why use iron as a cathode, all with graphite can not?
- The iron electrode is easier to be installed in the electrolytic cell, which is more convenient than the graphite electrode, and the density of the graphite is small. After being adsorbed by hydrogen, the graphite is easy to float up, and the density of the iron is larger. This problem does not exist in the.5
- Q: Why should graphite paper be placed between the heater and the graphite electrode?
- Heater design, the common heater has three shapes, cylinder, cup, spiral, the vast majority of the current heater is cylindrical, as shown in figure. The spiral heater has complicated processing technology and has been eliminated. Cup shaped heater for hemispherical crucible, the bottom melt temperature is more uniform, because the processing technology is difficult, already no use. Nowadays, most of them use cylinder heaters. The cylindrical heater is not only easy to process, but also is related to the large number of flat crucible used in the direct drawing single crystal furnace.
- Q: Are graphite and carbon electrodes the same? What kinds of ore furnaces are used?
- Graphite electrode should be relatively pure, composed of graphite.
- Q: How should carbon deposits be treated?
- It is very necessary to clean the throttle valve, clean the nozzle, and clean the carbon in the engine cylinder! However, in order to reduce the trouble of cleaning, it is best to join the regular application of graphene Moqi additive in lubricating oil for engine.
- Q: Classification of graphite electrodes
- Allows the use of current density of less than 17A/ cm 2 graphite electrode, mainly used for steelmaking, smelting silicon, yellow phosphorus and other ordinary power furnace.
- Q: Graphite graphite graphite graphite electrode what is the use?
- Natural graphite electrode is the main raw material with graphite, high purity flake graphite powder or high carbon flake graphite powder as raw material, because carbon or graphite powder purity is high, the effect of conductive graphite powder is better in smelting alloy steel, iron alloy, electrode graphite powder as raw material. The electrode produced, then the strong current through the melting zone, the arc electrode into the electric furnace, the electrical energy into heat, the temperature rises to 2000 degrees Celsius, so as to achieve the purpose of melting or reaction.
- Q: Do electroplating experiments, graphite as an electrode, graphite how to pre process to ensure that the coating will not fall, resulting in increased color of the solution
- Graphite as anode, generally do not need special treatment, but to choose high purity, high density, high strength (so-called "three high" graphite) graphite on the line, this graphite in brush plating operations are often used as anode material.
Send your message to us
Graphite Electrodes Amazon - Purity Graphite Electrode for Nipple Stretching
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords