FRP Composite Insulated Panel Hydraulic Pultrusion Machine with High Quality and Gold Price
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 21 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
FRP Composite Insulated Panel Hydraulic Pultrusion Machine with High Quality and Gold Price
Product Description:
Hydraulic type pultrusion machine is controlled by PLC, which adopts hydraulic pressure type to-and-fro as traction force with pneumatic length-fixing cutting.The machine can produce various FRP Pultrusion Profiles include square tubes,rectangular tubes, round tubes, angles, I-shapes, channel, rod, and rod fiberglass pultruded profile . The line consists of roving racks, resin bath, mould calibrating table, to-and-fro traction machine, cutting saw, racks for finished products and control system.
Product Features:
1. The whole production line occupy 20-30M at length, 3 meter at width, about 60-100 square meter. The machine is designed according to the big section profile, with the features of strong traction force; it is steadily to operate;
2, The main machine is steel structure, stainless steel panel, side panel is paint. With the two kinds of pultrusion modes: Debugging and succession, it is convenience to adjust the production craft;
3. Traction gantry makes ordered according to requested length.
4. The machine had two hydraulic pressure system, it had strong ability of anti-interference;
Hydraulic station: we used the latest technology: pump is multi-group pump source (to ensure stability in forward speed.) Hydraulic parts are made of stacked clip (easy maintenance), and the tension and clamping force can make stepless adjustment. Traction speed with precision throttle, to ensure the stability of traction speed, and stepless speed adjustment of the traction. Hydraulic station with switch, so as to control the hydraulic oil heating up and down, so as to ensure the normal operation of the hydraulic system
5. Provides the powerful force chiller; the machine can realize 24 hours revolutions easily;
6,Using function: it have single and double manually operated gantry and double gantry automatic reciprocating running function. Automatic intermittent time can be automatically settled, and the actual production tension can be feedback by sensor.
Product Parameter:
Name | FRP Composite Insulated Panel Hydraulic Pultrusion Machine with High Quality and Gold Price |
Brand | CMAX |
Weight | 2-10T |
Dimension(L*W*H) | 25mx3mx2.2m |
Power | 55kw |
Voltage | 220V/380V |
Product Type | FRP Machinery |
Certification | ISO9001:2008 |
Application | Plates |
Raw material | Fiber Reinforced Plastic |
Place of Origin | Hebei, China (Mainland) |
Color | Selectable |
Warranty | 2 Years |
Time of Delivery | 30-45 days |
Product Pictures:
FAQ:
Question 1 : What is Pultrusion?
Answer : Pultrusion is a continuous low pressured molding process using fiber reinforcements and thermosetting resins matrices. The fiber reinforcements are drawn through resin bath or injected with resin in which all fibers are thoroughly impregnated with the liquid resin system. The wet-out fiber is formed to the desired geometric shape and pulled into a heated steel die. Once inside the die, the resin cure is initiated by controlling at precise elevated temperatures. The composite laminate solidifies in the exact cavity shape of the die, as it is continuously "pulled" by the Pultrusion machine, thus getting the name - Pultrusion.
Question 2 : Can any shape be pultruded?
Answer : Virtually any constant cross section can be pultruded dependant upon wall thickness and complexity of the cross section of the profile.
Question 3 : What are the most typical resins used in the Pultrusion process?
Answer : Most commonly utilized are standard thermosetting resins such as polyesters, vinyl esters, epoxies, phenolics and urethanes during the pultrusion manufacturing process. However, thermoplastic resins can also be utilized in the Pultrusion process.
Question 4 : What are the most typical reinforcements used in the Pultrusion process?
Answer : Typical reinforcements used are fiberglass roving, continuous strand mat, woven and stitched fabrics. Other reinforcing materials such as basalt fiber, carbon and aramid fibers, which are more costly, can be utilized during the Pultrusion process to increase the modulus / stiffness of the composite member.
- Q: Which kind of engineering plastics can be machined on machine tools?
- General raw materials market is available, you can also contact the internet.
- Q: What machine does the pattern design of this mass produced plastic product use?
- Hello, let me answer the question for you: you can open your mobile phone, Baidu, and then enter your current location, and then enter the address you want to query. The Baidu maps will automatically navigate the nearest route for you.
- Q: Types of plastic machinery
- There are many kinds of plastic machinery. According to the processing process is divided into extruder, injection molding machine and blow molding machine three major categories. In the screw extruder is under the action of the molten plastic extrusion through fixed shape extrusion, water cooling after cutting in the traction machine under the same section is mainly used for a variety of products. A large number of continuous production, such as pipe, rod profiles, also can be used for plastic modification and granulation.The basic mechanism of extrusion is simple - a screw rotates in the barrel and pushes the plastic forward. The screw is actually a ramp or slope that is wound around the center layer. The aim is to increase the pressure to overcome the greater resistance. Is an extruder, there are 3 kinds of resistance to overcome: solid particles (feed) on the cylinder wall friction and screw rotation before laps (feed) the mutual friction between them; melt in the cylinder wall adhesion; melt pushed forward when the resistance of the internal logistics.It is divided into single screw extruder and twin screw extruder. The injection molding machine is injecting molten plastic into the mold, cooling after the product. The use is very extensive, according to the different use of plastic, where is different. The injection molding machine is used in processing machinery and plastic processing industry the largest amount, not only a large number of productsCan direct production of injection molding machine, and it is composed of injection stretch blow moulding equipment key.
- Q: How much is the general control of plastic products profit? Thank you
- This will be seen as what, a plastic factory is not simple, but also have to buy the machine, please, now plastic products profit is very low, now a general machine as profit is about 150-200, the oneself still have to understand what I was doing, plastic products,
- Q: Environmental impact of foam plastics reprocessing
- When people are exposed to vinyl chloride, there will be a wrist, finger edema, skin sclerosis and other symptoms may also occur splenomegaly and liver injury disease. In our country, the ultra-thin plastic bags we use almost all come from the reuse of waste plastics. They are produced by small businesses or family workshops. The raw materials used in these factories are waste plastic barrels, pots, disposable syringes, etc.. Production, first used machinery to crush the raw material of plastic particles, plastic particles and then placed in a pool cleaning (called disinfection), check out the sun, and then the mechanical pressure it film, made of a variety of plastic bags. Every meal, many people use plastic bags of food, they do not know this behavior, not only harmful to the environment, but also harm their own bodies.Make the soil environment worse, and seriously affect the growth of crops. The degradation time of plastic products used in China usually takes at least 200 years. Waste plastic, plastic bags in the field long residue in Tanaka, will affect the absorption of water and nutrient of crops, inhibit the growth and development of crops, resulting in crop production. If the animal eats plastic film, it can cause the digestive tract disease and even death of the livestock.
- Q: Which kind of engineering plastics has good processability?
- Organic glass rods and plates, PTFE rod material, nylon rod, PVC sheet and other mechanical processing performance is good.
- Q: What's the price? How much does it cost to run a processing plant? What's better about that one?
- There are two kinds of plastic bottles: injection, blow and blow.Injection blowing is the two step, that is, injecting the bottle embryo first and then blowing it into a bottle. The machine mainly has the injection molding machine and the bottle blowing machine and the auxiliary machine and the corresponding mold.
- Q: How are the plastic products made of this texture processed?
- jointThe method of joining a plastic part is welding and bonding. Welding is the use of hot welding electrode welding, hot welding using hot welding, and high-frequency welding, friction welding, induction welding, ultrasonic welding, etc.. Bonding method can be divided into flux, resin solution and hot melt adhesive according to the adhesive used.Surface modificationThe purpose is to beautify the surface of plastic products, usually including: mechanical modification, namely with filing, grinding and polishing process, the removal of parts on edges, burrs, and fixed size; finishing, including coating surface parts, the use of a solvent to surface brightening, covered with patterned thin film surface; colour. Including painting, printing and printing; metal plating, including vacuum coating, electroplating and chemical plating method etc.. Among them, the hot stamping is heated, under pressure, the hot film on the color of aluminum foil (or other pattern film) transferred to the workpiece. Many household appliances and building products, articles and so on use this method to obtain the metal luster or the wood grain and so on the pattern.assemblingThe operation of assembling plastic parts into complete products by means of bonding, welding and mechanical joining. For example: plastic profiles, through sawing, cutting, welding, drilling and other steps, assembled into plastic window frames and plastic doors.
- Q: What kind of equipment do you need for the food market? How much would you like to invest? What about the profit?
- The first said equipment 1 blowing machine 2 printing machine 3 bag making machine 4 mill material if want to make your own words also need about 27000 granulating machine, film blowing machine, printing machine if printing a color around 10 thousand,
- Q: What kind of equipment does the groove on the PP plastic board work on?
- It can be machined with a shaper or engraving machine
Send your message to us
FRP Composite Insulated Panel Hydraulic Pultrusion Machine with High Quality and Gold Price
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 21 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
