Factory Whole Sale 18W 5730 5630 SMD LED
- Ref Price:
-
$1.03 - 5.15
/ pc
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 10 Pcs pc
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
18w 5730/5630 smd led / 18w cob leds is Suitable for different working environment, super excellent heat conduct design
Item | 18w smd COB 5630 leds specification |
Commedity | China supplier 3w cob led factory direct sale |
Part No. | LP-18w-5630 |
Color | warm white, natural white, pure white,cool white, red, yellow, green, blue,orange,purple and other colors you want |
Chip brand | Epistar ,taiwan |
Lumens | 80-110LM/w |
Power | 18w |
Current | 300mA |
Voltage | 57-65v |
CRI | >75 >80 >85 |
CCT range | 2800-3200k (warm white) 4000-5000k (Natural white) 5000-6500k (Pure white) >7000k (Cool white) |
Working temperature | -20 °C-+40 °C |
Super long lifetime | 40,000 H long lifetime |
Max Junction Temperature | 150°C |
Certification | CE, Rohs LM80 |
Lowest thermal resistance | 8°C/W |
Warranty | 3 years |
Place of Orign | Shenzhen Guangdong China |
Feature | Anti UV |
Technical | Silicone PC molding |
Advantages:
1.Professional led chip manufacturer
2.Experience technical staff
3.Quality control
4.Completive price
5.Good service
6.Small order available
7.Top quality raw material
8.International Approval
9.Prompt delivery
10.Guarantee/warranty
11.Excellent packaging
12.Environment friendly
13.Excellent performance
Specification
Lamp bead power: 0.5 W/pcs bead 50 to 60 LM/pcs bead
Color temperature: white light: 6000-6500 k, Warm white 3000-3200 k
SMD QUANTITY:
3W 6pcs 5730beads 3series 2parallel 300-360LM
5W 10pcs 5730beads 5series 2parallel 500-600LM
7W 14pcs 5730beads 7series 2parallel 700-840LM
9W 18pcs 5730beads 9series 2parallel 900-1080LM
12W 24pcs 5730beads 12series 2parallel 1200-1440LM
15W 30pcs 5730beads 15series 2parallel 1500-1800LM
18W 36pcs 5730 beads 18series 2parallel 1800-2160LM
Size:
3W: φ32mm×1.6mm
5W: φ50mm×1.6mm
7W: φ50mm×1.6mm
9W: φ65mm×1.6mm
12W: φ 65mm×1.6mm
15w: Diameter 85mm×1.6mm
18w: Diameter 100mm×1.6mm
Attention
1. Over-current-proof
Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen).
2. Storage
2.1 It is recommended to store the products in the following conditions
Humidity: 60% R.H. Max.
Temperature: 5°C~30°C(41°F~86°F)
2.2 Shelf life in sealed bag: 12 month at <5°C~30°C and <30% R.H. after the package is opened,
the products should be used within 24hr s or they should be kept stored at<20% R.H. with zip-lock sealed.
3. Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Packaging & Shipping
Packing:
Standard packing inside, cartons outside
Delivery:
Shipping Service | Estimated Delivery Time |
DHL | 2-8 business days |
FedEx | 3-8 business days |
TNT | 2-10 business days |
UPS | 1-7 business days |
EMS | 6-14 business days |
ePacket | 7-12 business days |
China Post Air Mail | 7-15 business days |
China Post SAL | 14-30 business days |
Air freight | 3-10 business days |
By Sea | 30-40 business days |
1. 3-5 business days for Sample Orders; 7-30 business days for Bulk Orders for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q: What is the principle used in SMD LED lamp, should pay attention to what the problem?
- Table 1, contact electrostatic protection LED product should be covered with protective electric tape, and its reliable grounding; 2, personnel shall wear groundstrap in contact with LED (best for cable, protective gloves, anti-static ring) allows better wear anti-static clothing, anti-static shoes and static electricity cap; 3, the application in the process of exposure to LED equipment must be reliable grounding, such as iron, shearing machine, bending machine and welding equipment. Conditional still can install plasma fan to eliminate electrostatic; 4, in use or when designing electronic circuit, must consider the harm that excessive current has to LED
- Q: How can I install the patch LED lamp belt on the wood chip casting board? With double-sided glue will be hot, and can not use the clip on the screw, what should I do?
- With double-sided adhesive, the temperature will not be very high. So it won't fall either. That's how I got it. It took me more than half a year, and I didn't have any problems
- Q: Which is good for LED patch and LED bulb?
- LED (light emitting diode) patch (package)LED patch (SMD) made by FPC circuit board, LED, high quality silica gel. The waterproof performance, using low voltage DC power supply is safe and convenient, light colors, bright colors; outdoor use can be anti UV aging, yellowing, high temperature resistance and other advantages, the products are widely used in building lights, decorative lighting, advertising - Entertainment decorative lighting lighting field.LED bulbA solid state semiconductor device that converts electric energy into visible light by means of LED (light-emitting diode), which converts electricity directly into light; LED = Large, Electronic, Display,;
- Q: LED patches have several ways of welding. Which ones can be reflow? What can be done by eutectic welding? Is the welding of viscose and lens material is required?
- SMD patch products basically can be used in reflow soldering, especially a little note here that the eutectic welding is the connection between the chip and the substrate support or specifically, is the bottom of the chip after completion of production of coating material and a layer of Sikkim alloy, and then set up a heating zone in solid crystal machine package in time and a temperature of about 300 degrees, the realization process of the chip at the bottom of the Sikkim alloy melt and silver plated layer connection bracket, and a clear distinction between reflow.
- Q: How many volts is a single LED on the LED patch band?
- LED patch lamp is made of FPC circuit board, LED lamp and high quality silica gel sleeve. Waterproof performance, using low voltage DC power supply is safe and convenient, light colors, bright colors; outdoor use can be anti UV aging, yellowing, high temperature resistance and other advantages, the products are widely used in building lights, decorative lighting, advertising and entertainment quasi decorative lighting lighting field.
- Q: What are the storage requirements of SMT patch LED (LED)?
- Moisture-proof packing- anti SMD LED in the transport and storage of moisture absorption, SMD LED shall be placed in sealed moisture-proof bag, inside put damp proof agent for protection, and placed the humidity humidity SMD display card packaging bag.
- Q: Patch LED features
- Without heating time, lighting is faster than general light (about 3 ~ 400ns).The electro optic conversion efficiency is high, the power consumption is small, and the energy consumption is about 1/3 ~ 1/20 than that of the bulb.
- Q: What does "1210" mean in patch LED?
- At present, most manufacturers of SMD light strip used by 3528 and 5050, and 3535 and 5630 in the majority, there are many of the 3528 and 5050 and 3535, such as patch LED used in automotive lighting.
- Q: SMD LED lamp working voltage?
- LED is a light emitting device of low voltage, low current, low power forward current general patch type LED when using (IF) 20MA, (VF) 1.8-2.5V, voltage of red green and blue (VF) voltage is 3.0-3.6V. Different manufacturers also have small differences, so first of all, look at the color,Of course. The multi chip assembly in high voltage chip together, some current: 1 watts, 1 watts and above. A wide variety of varieties, as follows:
- Q: Such as title, please have welding patch LED lamp experience expert guidance, do not search from the Internet to the theoretical knowledge, thank you!
- First of all, welding LED and other electronic products with line electrostatic ring, to prevent static light.When welding the patch LED lamp, first add the tin on the pad of the lamp board, then clamp the LED patch lamp with tweezers. Then, the soldering iron will melt the tin of the solder plate of your lamp board, and then push the LED lamp onto the pad with tweezers. The whole welding process should not exceed 5 seconds, otherwise it will burn the lamp easily.
Send your message to us
Factory Whole Sale 18W 5730 5630 SMD LED
- Ref Price:
-
$1.03 - 5.15
/ pc
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 10 Pcs pc
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
