Dehumidifiers Products
- Loading Port:
- Beijiao
- Payment Terms:
- L/C,T/T,O / A
- Min Order Qty:
- 2000 Sets unit
- Supply Capability:
- 10,000unitsday unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Dehumidifiers For Home R134 Environmental Protection Refrigerant Air Dehumidifier
Feature
1) Can be used within 5 - 35°C temperature range
2) R134a environmental protection refrigerant
3) Compact and elegant design with air outlet
on the top of the unit to enable fast air circulation
4) Automatically switches off when water tank is full
5) Powerful dehumidifying
6) Mechanical control panel
Parameter
Power supply | V-Ph-Hz | 220-240V~ 50Hz, 1Ph | |
Performance | Moisture removal | L/day | 10L |
Rated.input consumption | W | 285 | |
Rated. current | A | 1.57 | |
Energy factor(EEV) | L/kWh | 1.3 | |
Max. input consumption | W | ||
Max. current | A | ||
Starting current | A | 4.5 | |
Power cord | mm2 | 0.75x3 / VDE | |
Control type | Electronic Control | ||
System Data | Refrigerant type | kg | R134A/0.11 |
Design pressure | MPa | 1.7/0.7 | |
Water tank volume | L | 3 | |
Air flow (High/Mid/Low) | m3/h | 200 | |
Noise level (High/Mid/Low) | dB(A) | 47 | |
Applicable Ambient | RH Range Manual | 35~85% | |
Ambient temp | °C | 5~35 | |
Application area | m2 | 16-31 | |
Dimension (W*D*H) | mm | 350x210x510 | |
Packing (W*D*H) | mm | 390x280x530 | |
Net/Gross weight | Kg | 10.5/11.5 | |
Stuffing quantity (20'/40'/40'HQ) | Set | 504/1008/1260 | |
Compressor | Model | QX42H | |
Type | ROTARY | ||
Brand | KANGPUSI |
FAQ
Q 1.Okorder Quality Control?
We hold a very strict quality control system to check every connector of our products for
your safety.
Q 2: How do you care for your kitchen appliances?
A: Keep good Ventilation indoor. Open the doors of the kitchen appliances, if not. There
will be some mildew on cutting board and other kitchenware, because the water vapor can not
evaporate easily.
Keep clean of all the appliances. Each kitchen has its special cleaning fluid,please go to
Kitchen cleaning stores buy some clean them on time.
Q 3: Which one do you use the most of kitchen appliances?
A: Assuming you mean small appliances .I say too many! At one time we would buy every one
that came along; including a hot dog machine, pizza maker, elec. carving knife, elec.,
toaster oven,. Most have been garaged sale (sold) or are stored in the garage. Most used;
coffee maker, microwave, blender and mini food processor. OK?
- Q: What's the difference between freeze dryer, micro heat regeneration dryer, non thermal regeneration dryer and waste heat regeneration dryer?
- Waste heat regeneration dryer - as the name suggests, use other equipment or boiler heat to take over, will be heated again heating, in order to achieve better regeneration purpose, at the same time waste heat utilization to achieve energy saving purposes
- Q: What is the principle of a spray dehumidifier?
- When the temperature of the wet gas drops below the dew point, the steam condenses and reduces the humidity of the gas
- Q: What is the mean of Dehumidifier?
- The air can be blown through a number of metal fin tubes, with cold water in the pipe, and the surface temperature of the tube wall shall be lower than the dew point of the air, so that the water vapor in the air can be partially condensed and removed on the surface of the tube
- Q: What are the remarkable characteristics of CMD membrane dryer?
- A more reliable and economical drying compressed air can be obtained
- Q: What are the characteristics of a radiation dryer?
- Heat the wet material and dry it by radiation heat transfer
- Q: What's the function of an automobile dryer?
- The automobile dryer is an indispensable parts of automobiles, especially some heavy vehicles are equipped with, it is the role of the automobile pump out of the compressed air drying, filtration, the gas containing impurities will not pass gas into the automobile braking system, so as to keep the vehicle brake system is sensitive and effective.
- Q: What are the factors that affect drying effect of dryer?
- In the air around the particles, the absorption of heat and the dispersion of water molecules to the surface of the particles require certain moments. Therefore, the resin supplier shall specify the time at which all the necessary drying of a material is dried at the proper temperature and dew point
- Q: What are the factors affecting the dryer?
- Drying temperature, heat is the key to opening up the force between water molecules and hygroscopic polymers. When higher than a certain temperature, the gravitational attraction between water molecules and polymer chains will be greatly reduced, and water vapor will be taken away by dry air
- Q: What are the drying agents that are often placed in the dryer?
- A dry agent is a substance that removes moisture from a moist substance, such as calcium sulfate and calcium chloride. It is dried by combining with water to form a hydrate
- Q: How to install the car air dryer?
- Installation location: away from the heat radiation source, well ventilated, close to the gas road system, the first use of gas tank, drying tank top should leave 30 ~ 50mm space, in order to replace desiccant
Send your message to us
Dehumidifiers Products
- Loading Port:
- Beijiao
- Payment Terms:
- L/C,T/T,O / A
- Min Order Qty:
- 2000 Sets unit
- Supply Capability:
- 10,000unitsday unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches