Cryogenic Insulation Paper Used in Insulation Industry
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 7 roll
- Supply Capability:
- 10000 roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Information of Cryogenic Insulation Paper Used in Insulation Industry
Cryogenic insulation paper (P paper/Z paper)/aluminum foil (or aluminized polyester film) compositions are laminated of Cryogenic insulation paper and aluminum foil (or aluminized polyester film). Cryogenic insulation paper can be wrapped to the cryogenic inner tank directly and no need to composite by user. Therefore, cryogenic insulation paper can effectively reduce the waste of material and hugely increases efficiency. The width varies from 40mm to 1800mm.
Applications of Cryogenic Insulation Paper Used in Insulation Industry
Cryogenic Insulation Paper is the top selected insulation materials applicable for cryogenic liquid storage & mobile containers and pipeline systems for liquid oxygen, nitrogen, hydrogen, helium, argon, LNG and etc.
Advantages of Cryogenic Insulation Paper Used in Insulation Industry
Flame-retardant
Light
High tensile strength
Low heat conductivity coefficient
Large thermal contact resistance
Low air content under the vacuum and broad operating temperature(-269℃-500℃)
Image of Cryogenic Insulation Paper Used in Insulation Industry
Technical Data of Cryogenic Insulation Paper Used in Insulation Industry
FAQ
Q1: How do you control the products quality?
A1: With strict quality control system throughout the materials selection and production process, our refractory and ceramic fiber products quality is effectively controlled to meet customer requirements.
From the raw materials selecting, our quality control begin. The quality certificates of raw materials are required and each batch will be tested before using. During production, the quality control is conducted by workers and then each piece will be sorted and examined by quality supervisor.
Q2: What`s the lead time for my order?
A2: It depends on customers’ requirements and our production schedule. And usually we need 30-60 days for refractory bricks, 10-25 days for unshaped refractory materials and 10-20 days for ceramic fiber blankets.
Q3: Can you offer Door-to-Door delivery?
A3: Yes, but only for some countries such as U.S., UAE, Saudi Arabia, Iran, and Russia, etc.
Q4: What is the minimum quantity?
A4: There is no minimum order quantity. Depending on the item and processing, there may be a minimum production required, however we can offer a quotation based only on the quantity you need.
Q5: Can you give me a brief introduction of the application of your products?
A5: CNBM (China National Building Material) core refractory business comprises the production, sale and installation of high-grade refractory products, the development and implementation of customized system solutions as well as rendering outstanding services for the key industries in Glass, Iron& Steel, Petrochemical, Cement, Ceramic and Nonferrous Metals.
- Q:What is the meaning of deep frozen
- In general, the frozen layer of our home refrigerator can only reach -18 degrees, but also slow freezing, slow freezing will have a great impact on food nutrition and flavor.
- Q:What is the meaning of vacuum cooling in heat treatment
- Placed for a period of time, known as cryogenic treatment, under normal circumstances are usually treated with liquid nitrogen.
- Q:Cryogenic treatment to improve what performance?
- Cryogenic treatment (cryogenic treatment) refers to the materials needed at -190 DEG C to -230 DEG C under treatment. Suitable for all metal or nonmetal material, such as alloy, carbide, plastic (nylon and Tie Fulong), aluminum, ceramics etc..
- Q:I would like to ask how the process of cryogenic treatment
- It's just a rough process of producing oxygen through cryogenic technologyNitrogen can also be re cooled into liquid nitrogen -196 degrees.Liquid nitrogen can be used for some cryogenic treatmentIf the temperature is lower, can use liquid helium.Cryogenic applications
- Q:Can the cryogenic phase control the cooling rate?
- 2, the compressor refrigeration principle: the use of the suction pipe of refrigerant gas inhalation of low temperature and low pressure, through the operation of the motor drives the piston to compress it after high temperature and high pressure refrigerant gas discharge pipe to the exhaust, to provide power for the refrigeration cycle, so as to realize the compression, condensation, expansion and evaporation (endothermic) refrigeration cycle. The refrigerant of the compressor can be repeatedly used for a plurality of times, the consumption is relatively small, the power consumption in the refrigeration process is more, the cooling rate is relatively small, and the refrigeration temperature range is 0-80 DEG C. The above mentioned two kinds of refrigeration in the process of industrial production of cryogenic box, the use of liquid nitrogen refrigeration will be more. Liquid nitrogen refrigeration can be used in the temperature range from 0 DEG C to -196 DEG C. []
- Q:What is the meaning of cryogenic technology in the mechanical process, what is the specific practice?
- Treatment of -130 DEG C is said to be a new and strong treatment process of cryogenic treatment to improve the wear resistance and toughness of materials and to improve the overall service life
- Q:How many changes in the properties of the cryogenic metal?
- The name of the processing content specification / processing content of the original service life (sub / piece) after the service life (times / pieces)1 milling cutter milling keyway 7.5-2NT 40034352 step drilling hole Phi: 1.2, 23, 1331004163 milling cutter milling air hole Phi 11.5, 32-2NT
- Q:Ultra low pressure casting mold useful, how to arrange the process? Thank you
- Cryogenic treatment in the connector industry and plastic mold industry has a large number of applications, connectors and plastic products industry production temperature is not high, about 300 degrees! Thus the mold in the production of hot and cold alternating stress is less, after doing a cryogenic treatment, the role of the stability of the size of the more obvious, tube time is longer!
- Q:What is a cryogenic fast line
- Equipment is compressor, heat exchanger and expander (or throttle). The compressor and expander generally use a reciprocating or turbine. Commonly used heat exchanger coil type, shell and tube type or plate heat exchanger. Deep freezing technology, can the nature of the study of materials near absolute zero, and can be used for the separation of liquid and gas mixture of gases. Industry can get liquid oxygen, liquid, gas, etc.; Can be effectively separated from the air
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Cryogenic Insulation Paper Used in Insulation Industry
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 7 roll
- Supply Capability:
- 10000 roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
