Cryogenic Insulation Paper for Chemical Industry
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 4 roll
- Supply Capability:
- 10000 roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Information of Cryogenic Insulation Paper Used in Chemical Industry
Cryogenic insulation paper (P paper/Z paper)/aluminum foil (or aluminized polyester film) compositions are laminated of Cryogenic insulation paper and aluminum foil (or aluminized polyester film). Cryogenic insulation paper can be wrapped to the cryogenic inner tank directly and no need to composite by user. Therefore, cryogenic insulation paper can effectively reduce the waste of material and hugely increases efficiency. The width varies from 40mm to 1800mm.
Applications of Cryogenic Insulation Paper Used in Chemical Industry
Cryogenic Insulation Paper is the top selected insulation materials applicable for cryogenic liquid storage & mobile containers and pipeline systems for liquid oxygen, nitrogen, hydrogen, helium, argon, LNG and etc.
Advantages of Cryogenic Insulation Paper Used in Chemical Industry
Flame-retardant
Light
High tensile strength
Low heat conductivity coefficient
Large thermal contact resistance
Low air content under the vacuum and broad operating temperature(-269℃-500℃)
Image of Cryogenic Insulation Paper Used in Chemical Industry
Technical Data of Cryogenic Insulation Paper Used in Chemical Industry
FAQ
Q1: How do you control the products quality?
A1: With strict quality control system throughout the materials selection and production process, our refractory and ceramic fiber products quality is effectively controlled to meet customer requirements.
From the raw materials selecting, our quality control begin. The quality certificates of raw materials are required and each batch will be tested before using. During production, the quality control is conducted by workers and then each piece will be sorted and examined by quality supervisor.
Q2: What`s the lead time for my order?
A2: It depends on customers’ requirements and our production schedule. And usually we need 30-60 days for refractory bricks, 10-25 days for unshaped refractory materials and 10-20 days for ceramic fiber blankets.
Q3: Can you offer Door-to-Door delivery?
A3: Yes, but only for some countries such as U.S., UAE, Saudi Arabia, Iran, and Russia, etc.
Q4: What is the minimum quantity?
A4: There is no minimum order quantity. Depending on the item and processing, there may be a minimum production required, however we can offer a quotation based only on the quantity you need.
Q5: Can you give me a brief introduction of the application of your products?
A5: CNBM (China National Building Material) core refractory business comprises the production, sale and installation of high-grade refractory products, the development and implementation of customized system solutions as well as rendering outstanding services for the key industries in Glass, Iron& Steel, Petrochemical, Cement, Ceramic and Nonferrous Metals.
- Q:What is the meaning of deep frozen
- In general, the frozen layer of our home refrigerator can only reach -18 degrees, but also slow freezing, slow freezing will have a great impact on food nutrition and flavor.
- Q:What is the meaning of vacuum cooling in heat treatment
- Placed for a period of time, known as cryogenic treatment, under normal circumstances are usually treated with liquid nitrogen.
- Q:Cryogenic treatment to improve what performance?
- Improve the impact toughness of the workpiece;Improve the internal stress distribution and improve the fatigue strength;Improve the corrosion resistance of the workpiece;
- Q:I would like to ask how the process of cryogenic treatment
- It's just a rough process of producing oxygen through cryogenic technologyNitrogen can also be re cooled into liquid nitrogen -196 degrees.Liquid nitrogen can be used for some cryogenic treatmentIf the temperature is lower, can use liquid helium.Cryogenic applications
- Q:Can the cryogenic phase control the cooling rate?
- 2, the compressor refrigeration principle: the use of the suction pipe of refrigerant gas inhalation of low temperature and low pressure, through the operation of the motor drives the piston to compress it after high temperature and high pressure refrigerant gas discharge pipe to the exhaust, to provide power for the refrigeration cycle, so as to realize the compression, condensation, expansion and evaporation (endothermic) refrigeration cycle. The refrigerant of the compressor can be repeatedly used for a plurality of times, the consumption is relatively small, the power consumption in the refrigeration process is more, the cooling rate is relatively small, and the refrigeration temperature range is 0-80 DEG C. The above mentioned two kinds of refrigeration in the process of industrial production of cryogenic box, the use of liquid nitrogen refrigeration will be more. Liquid nitrogen refrigeration can be used in the temperature range from 0 DEG C to -196 DEG C. []
- Q:What is the meaning of cryogenic technology in the mechanical process, what is the specific practice?
- Copper alloy, hard alloy, plastic, glass and so on to improve the uniformity of low temperature, stable size, reduce deformation, improve service life
- Q:How many changes in the properties of the cryogenic metal?
- 10 diamond drill footage of 231.2 meters to 595 meters.11 M6 high speed steel fibers processing aluminum casting parts 1200 40012 high speed steel milling cutter cutting area of copper 350 pieces of 750 pieces13 cutting blade YT798 area A3 51 square meters to 98 square meters14 cutting blade YT798 area ZG15Gr1M01 7 square meters to 12 square meters15 YT330 blade ZG15Gr1M02 for 6 minutes 19.8 minutes16 YT15 blade cutting length 20# low carbon steel 3M 7M17 YT30 blade cutting length 20# low carbon steel 5m 9.7M
- Q:Ultra low pressure casting mold useful, how to arrange the process? Thank you
- While casting field production high temperature is about 660 degrees, some die casting production Aluminum Alloy temperature of 740 degrees, copper alloy die-casting production temperature even up to about one thousand degrees, the temperature and the ambient temperature, the temperature fluctuation is bigger, hot and cold alternating stress caused by the greater! That is, the stress produced in the production process is very large, even if the cryogenic treatment, the stability of the role of the size of the casting mold and plastic mold is not obvious! As for how you choose, you might as well try!
- Q:What is a cryogenic fast line
- Broadly, cryogenic means - the temperature under 100 ℃, in industry can be divided into gas liquefaction technology, chemical industry and material industry of cryogenic treatment.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Cryogenic Insulation Paper for Chemical Industry
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 4 roll
- Supply Capability:
- 10000 roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
