Corundum High Alumina Brick 92%
- Ref Price:
-
$1,510.11 - 1,845.69
/ m.t.
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 5 Tons m.t.
- Supply Capability:
- 1000 Tons Per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Information of High Alumina Brick 92%
Our company’s High Alumina Bricks are the final result of blending excellent high-purity fused alumina as the main rawmaterial with cutting-edge technology, adding superfine powder, after mixing, drying, forming, in the high temperature shuttle kiln. We make sure that the High Alumina Bricks offered by us have gone through all the quality control parameters for maintaining their high quality standard. Their durability and strength adds life to the structure and they possess the capacity of bearing high temperature.
Technical Data of High Alumina Brick 92% | ||
Physical Properties: |
|
|
Refractoriness | ℃ | 1850 |
Permanent Linear Change(1600℃×2h)% | % | ±0.1 |
Apparent Porosity, % | % | ≤18 |
Cold Crushing Strength | Mpa | ≥80 |
Refractoriness Under Load (T0.6) | ℃ | ≥1700 |
Thermal Expansion, % | % | ≤0.8 |
Density | g/cm3 | ≥3.0 |
Chemical Analysis: |
|
|
Al2O3 | % | ≥92 |
Fe2O3 | % | ≤0.8 |
Note:
Technical Data are typical average results from test pieces. The technical data is offered solely for your consideration. And CNBM reserve the right to modify the technical data without any prior notice. Users of CNBM products should make their own tests to determine the suitability of each product for their particular purposes.
| ||
Feature of High Alumina Brick 92%
Good thermal shock resistance
Low porosity
Good erosion resistance
High compressive strength
Excellent high temperature mechanics
Application of High Alumina Brick 92%
High Alumina Bricks are mainly used:
1). As lining components for the high temperature industries furnace (such as refractory, electronics, ceramics industries).
2). As Thermal insulation components for the high temperature heating equipments, such as gas making furnace, gasification furnace of petrochemical industry, reacting furnace of off-colour industry, electric induction furnace of metallurgical industry.
- Q: Application of electric high temperature regulating valve?
- Now, the definition of refractories has not only depended on the degree of refractoriness is more than 1580 degrees celsius. At present, refractory materials refer to inorganic non-metallic materials used in metallurgy, petrochemical, cement, ceramics and other production equipment lining.
- Q: How much is a thermal brick?
- If you really want to buy thermal insulation brick, do not simply look at the price, but also to consider the quality of the product. (a piece of brick in the market basically in 6 yuan, if there is a floating price if it is because of the size of the insulation brick or distance, but floating slightly.)
- Q: What does refractory consist of?
- According to the chemical characteristics of refractory raw materials can be divided into acidic refractory materials, such as silica, zircon etc.; neutral refractory raw material, such as corundum, bauxite, mullite (acidic) (acidic), Ge (alkaline) iron and graphite; alkaline refractory materials, such as magnesite, dolomite, magnesium sand calcium sand.
- Q: Which is good, glazed brick and whole cast glazed brick?
- These two tiles have their respective advantages and disadvantages, in fact, to say which kind of good, mainly depends on the decoration of personal preferences and the location of the shop. If it is only the shop wall, then design and pattern rich whole glazed tile is good, it can make the room impressive, improve decorative effect, make the decoration style to fit the characteristics of his personality. In addition, clean up is relatively easy, not easy to contaminated with oil stains and other pollutants. If you are laying tile, suggested the use of tiles, tiles of good antiskid effect, water absorption rate is relatively low, so the kitchen toilet bathroom and other wet places is not easy to water seepage, improve the convenience of life.
- Q: Expansion ratio of lightweight corundum refractory bricks
- Now with the production of lightweight foam corundum brick, basically still meters with molding casting, moulding after together with die in the drying room drying in 60~70 C 4 days of release, then the appropriate drying, finally after 1300 and 1550 C firing, the total burning time: 50~60h. Light corundum brick after firing is usually not the size and shape of accurate, so that products after the kiln to mechanical or manual cutting, can be made into a density of 0.8 - 1.3g/cm3, 4MPa compressive strength and porosity, the thermal conductivity of 70%~80% 0.17W/ (M - K), light-weight corundum brick use temperature of 1500~1700 DEG C.
- Q: How to improve the induction furnace campaign, from the promotion of refractory life start
- Select suitable insulation materials, such as polycrystalline facing blocks and ceramic fiber modules, depending on the service temperature
- Q: Can the PE sintering plate dust collector be suitable for dust removal in the coking plant?
- The sinter plate dust collector is also called plastic plate dust collector. The utility model has the advantages that the utility model can adapt to various complicated working conditions, the dust removal rate is 99.99%, the utility model has the advantages of long service life, stable operation, high temperature resistance, and the utility model is a leading dedusting equipment in china.
- Q: What is the hardness of corundum refractory bricks?
- Al2O3 containing more than 90% greater than the refractory brick called corundum refractory brick, also known as pure alumina refractory products. Corundum has a high hardness (9 Mohs hardness) and a high melting point. These are closely related to the firmness of the Al - 0 bond in the structure. Therefore, a-Al2O3 is the main phase of making high temperature refractory bricks and high temperature electrical insulating materials.
- Q: High temperature refractory material?
- Now the definition of refractory materials, has not only depends on whether the refractoriness at 1580 DEG. Refers to the current refractories used in metallurgy, petrochemical, cement, ceramics and other production equipment with inorganic non-metallic materials.
- Q: How do corundum bricks bind?
- Each refractory brick is provided with corresponding refractory mud, and corundum bricks are bonded with corundum mud.
1. Manufacturer Overview
| Location | Henan, China |
| Year Established | 2007 |
| Annual Output Value | Above US$ 200 Million |
| Main Markets | North America;Asia;Western Europe;Africa;Russia;Middle East |
| Company Certifications | ISO 9001:2008 |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Tianjin |
| Export Percentage | 20% - 30% |
| No.of Employees in Trade Department | 10-20 People |
| Language Spoken: | English; Chinese |
| b) Factory Information | |
| Factory Size: | Above 150,000 square meters |
| No. of Production Lines | Above 10 |
| Contract Manufacturing | Installation guide, OEM Service Offered |
| Product Price Range | High; Average |
Send your message to us
Corundum High Alumina Brick 92%
- Ref Price:
-
$1,510.11 - 1,845.69
/ m.t.
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 5 Tons m.t.
- Supply Capability:
- 1000 Tons Per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
