Corundum Brick 94% High Alumina
- Ref Price:
-
$1,543.11 - 1,886.03
/ m.t.
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 5 Tons m.t.
- Supply Capability:
- 1000 Tons Per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Information of High Alumina Brick 94% Our company’s High Alumina Bricks 94% are the final result of blending excellent high-purity fused alumina as the main raw material with cutting-edge technology, adding superfine powder, after mixing, drying, forming, in the high temperature shuttle kiln. We make sure that the High Alumina Bricks offered by us have gone through all the quality control parameters for maintaining their high quality standard. Their durability and strength adds life to the structure and they possess the capacity of bearing high temperature. Technical Data of High Alumina Brick 94% Physical Properties: Refractoriness ℃ 1790 Permanent Lineat Change(1500℃×3h)% % - Apparent Porosity, % % ≤16 Cold Crushing Strength Mpa ≥80 Refractoriness Under Load (T0.6) ℃ ≥1650 Thermal Expansion, % % ≤0.8 Density g/cm3 ≥3.1 Chemical Analysis: Al2O3 % ≥94 Fe2O3 % ≤1 Note: Feature of High Alumina Brick 94% Good thermal shock resistance Low porosity Good erosion resistance High compressive strength Excellent high temperature mechanics Application of High Alumina Brick 94% High Alumina Bricks 94% are mainly used: 1). As lining components for the high temperature industries furnace (such as refractory, electronics, ceramics industries). 2). As Thermal insulation components for the high temperature heating equipments, such as gas making furnace, gasification furnace of petrochemical industry, reacting furnace of non-ferrous industry, electric induction furnace of metallurgical industry.
Technical Data are typical average results from test pieces. The technical data is offered solely for your consideration. And CNBM reserve the right to modify the technical data without any prior notice. Users of CNBM products should make their own tests to determine the suitability of each product for their particular purposes.
- Q: What kind of fused corundum corundum brick should be used for each part of the glass furnace?
- The compact microstructure of AZS33# zirconia corundum brick makes the bricks resistant to glass liquid corrosion, and it is difficult to produce stone or other defects in the glass kiln. It is the most widely used product in the glass furnace. It is mainly applied to the upper structure of the melting pool, the wall brick of the working pool and the paving brick, the material way, etc..
- Q: What material is used in an iron smelting furnace?
- In fact, refractory refractory ah is special ceramic frequently used AZS brick, corundum brick, magnesia chrome brick, silicon carbide, silicon nitride bonded silicon carbide, nitrides, silicides, sulfide, boride, carbide and other non oxide refractory materials; calcium oxide, chromium oxide, alumina, Magnesium Oxide, beryllium and other refractory materials.
- Q: What does refractory consist of?
- According to the chemical characteristics of refractory raw materials can be divided into acidic refractory materials, such as silica, zircon etc.; neutral refractory raw material, such as corundum, bauxite, mullite (acidic) (acidic), Ge (alkaline) iron and graphite; alkaline refractory materials, such as magnesite, dolomite, magnesium sand calcium sand.
- Q: What is the blast furnace ceramic cup called by the refractory factory?
- The refractory bricks, which are suitable for blast furnace conditions, are vitrified by high temperature sintering. They are like a huge cup, so they are called ceramic cups. The name was taken by the French, and the technology was handed down from france!
- Q: Which is good, glazed brick and whole cast glazed brick?
- Vitreous tile is all ceramic tile, the material is hard, strong wear resistance, smooth finish is very good, in general, looks very bright. Microcrystalline brick, corundum brick Market said, they really mean bohuazhuan. Because of its low water absorption and high strength and hardness, glazed tile has been widely used. Many hotels, shopping malls and office space are widely used glass tile.
- Q: Which is faster for heat transfer between corundum bricks and high alumina bricks?
- There must be a difference. They vary in color from the amount of aluminum, the weight, the temperature, and the color.
- Q: What is the difference between corundum and high alumina?
- The main components of high alumina brick are high alumina bauxite, mullite and partial corundum sand.The difference between them lies in the content of alumina and the alumina refractory products with alumina content higher than 48%The content of Al2O3 is higher than 90%, which is called corundum brick.
- Q: Is liquid phosphoric acid two aluminum hydrogen flammable?
- Liquid phosphoric acid two hydrogen aluminum features: easy mixing, molding, especially suitable for field construction, so liquid phosphoric acid two hydrogen aluminum is not flammable
- Q: What is the difference between T3 refractory bricks and high alumina refractory bricks?
- High aluminum refractory brick brick is all in one type of material classification, the material is AL2O3 high bauxite content above 55%, refractory brick by material into clay bricks, high aluminum brick brick brick corundum brick
- Q: What kind of rock is corundum produced?
- Aluminum oxide (Al2O3) mineral. Due to Mohs hardness of up to 9, mainly used as high-grade abrasives. The crystal belongs to the three party system, a dolioform six square column, some are needle or plate. Aggregates are massive or columnar. Usually white, gray, yellow and other colors. If a small amount of Cr3+ is red, a ruby is called;
1. Manufacturer Overview
| Location | Henan, China |
| Year Established | 2007 |
| Annual Output Value | Above US$ 200 Million |
| Main Markets | North America;Asia;Western Europe;Africa;Russia;Middle East |
| Company Certifications | ISO 9001:2008 |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Tianjin |
| Export Percentage | 20% - 30% |
| No.of Employees in Trade Department | 10-20 People |
| Language Spoken: | English; Chinese |
| b) Factory Information | |
| Factory Size: | Above 150,000 square meters |
| No. of Production Lines | Above 10 |
| Contract Manufacturing | Installation guide, OEM Service Offered |
| Product Price Range | High; Average |
Send your message to us
Corundum Brick 94% High Alumina
- Ref Price:
-
$1,543.11 - 1,886.03
/ m.t.
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 5 Tons m.t.
- Supply Capability:
- 1000 Tons Per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
