CMAX Main Technical Specifications of HDPE High Efficiency Single Screw Plastic Extruder
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 30 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Packaging & Delivery
Packaging Detail: | Best Sea transportion package to avoid damagement |
Delivery Detail: | 60 days |
Advantages:
It is widely used in the area of water supply and gas supply. Feeding section is grooved structure with temperature controller, and easy
to get high capacity and stable extrusion. With advanced BM screw structure, it is able to divide the HDPE material from solid to liquid.
Features:
By using the new type barrier screw design, this extruder has a high extrusion capacity in high RPM with the low energy consumption, and this extruder can gain a good mixing effect in the low temperature, and this extruder can control the material shearing to get the ideal and even melt temperature, so that the ripple mark in the inner wall of the big diameter pipe can be avoided.
All Key parts: screw&barrel, die, calibrator and downstream equipment are made by Jwell factory!
FAQ
1. What are CNBM coming from?
Jwell made the first Chinese screw and barrel in 1978 in brand. Nowaday, in this location BEIJING city, there are more than thousands of companies. After more than 35 years development, CNBM is the TOP 1 extrusion machine supplier in China
2. Why should I choose CNBM?
We follow Germany type of business heading as the worldwide reliable supplier of plastic extrusion line. We have already provided more than 500 lines located in all countries because we are providing the lastest technology, qualified machine, reliable component and best after-service. 300 Engineers are travelling in the world throughout year for installation and test of machine, the after-service are free and availble forever. That's why we grow up from 10 staff company to 3000 staff Pioneer of Chinese extrusion machine supplier.
- Q: Why will the extruder frequency shift stop?
- Because the frequency converter is out of order, you can look at the fault record parameters of the inverter.
- Q: What is the adjustment method of China's extrusion machine die?
- (2) run mode: plastic glue on the plasticizing after adjustment for mold screw, die according to how much glue circle, ran glue, side adjustment, adjustment should be loose thin screws, tighten the screws run glue thick; at the same time sampling check plastic thickness is eccentric, until evenly so far, then tighten the screw die respectively.
- Q: Cable extruder how to match the mold, how to calculate the formula, ask the master pointing
- Look at what you have in the form of mold, extrusion, drawing, or half pipe
- Q: Extrusion blow molding machine, storage or continuous type good?
- This is not good or bad, depends on what your product is If the product cycle large volume high capacity is bound to produce a product with storage because of your long,
- Q: Which type of inverter is suitable for extruding machine? Please give expert advice, and G series is discontinued
- They can see it moving.God doesn't need itSometimes you hear, fifth hand material,Cool sounds in the swirling smokeCoagulation together, I have left their land,Yesterday was a similar experience, ha ha
- Q: PLC based extrusion machine control system design graduation thesis and PLC based injection molding machine control system thesis content?
- Tip three: select the topic according to the documents. Literature is the foundation of support, enrich the direction and point of view, but also can reflect the research result, the author embarks from the existing literature, topic and refine the title, became the third skills.
- Q: Before and after the original good tune, up and down again before and after the tune, before and after, and up and down again
- The nose is not accurate enough or wornOr the screws are not screwed in placeOr die inappropriate, too large
- Q: What should be paid attention to in the daily maintenance of the extruder?
- Extrusion machine regular maintenance mainly has these aspectsdrive system(1) check the temperature rise of motor and oil tank, whether the bearing is overheated locally, the abnormal noise of motor and gear, oil leakage, radial circle of oil filter and spline shaft, and the contact gap with the end of screw.(2) regularly clean the oil filter and remove the dirt at the bottom of the tank, and lubricate the lubrication points regularly.(3) the new gear box has been filled with gear oil, and new oil will be replaced every 4000 hours after the operation.
- Q: why production is not strong?I have several new co extrusion machines, but the blown plastic bags are not produced by others
- Tensile strength is divided between longitudinal and transverse, and PE bags are transversely increased, available 8CLLDPE is added, longitudinal can be added to medium, medium density or high-density material to increase tensile strength.
- Q: What is the principle of the 45 extruder machine?
- The principle of the extruder is the theoretical process of heating, melting and mixing in the process of plastic conveying, including solid conveying principle, melt transportation principle, mixing principle, and solid bed crushing process, etc..
Send your message to us
CMAX Main Technical Specifications of HDPE High Efficiency Single Screw Plastic Extruder
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 30 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords