cast iron gate valve wooden box outside Standard Structure: Gate Pressure: Medium
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 9999 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product information
Gate valve (gate valve) is a opening and closing the gate assembly, perpendicular to the direction of movement and direction of flow of the gate, gate valve can be fully open and fully closed, discomfort door parameter varies, usually 5 degrees, the medium temperature is not high for 2 ~ 52 '. Improve the process, make up the sealing surface angle in the process of the deviation, which is called the gate.
The structure of editor mainly composed of a valve body, a valve rod and a butterfly plate and a sealing ring. The valve body is cylindrical, with short axial length.
The working principle of butterfly valve butterfly plate driven by the stem editor, if turned 90 degrees, will be able to complete a hoist. Change the deflection angle of the butterfly plate, you can control the flow of media.
Working condition and medium: butterfly valve used in furnace, gas, natural gas, liquefied petroleum gas, city gas, hot and cold air, metallurgical and chemical industry and environment-friendly power generation, building to drainage engineering system transport all kinds of corrosive and non corrosive fluid pipe for regulating and truncated medium flow.
Butterfly valve uses edit (English: butterfly valve butterfly valve refers to close (valve or butterfly valve plate) for the disc, around the valve axis of rotation to achieve the opening and closing a valve, in the pipeline mainly cut off and throttling action. Butterfly valve opening and closing parts is a disc - shaped disc, in the body around its own axis of rotation, so as to achieve the purpose of opening or closing or regulation. Valve fully open to fully closed is usually less than 90 DEG, butterfly and Butterfly Bar itself is not self-locking capability, in order to position the disc to install the valve stem on the worm gear reducer. Using worm gear reducer, not only can make the butterfly board with self locking ability, so that the butterfly board to stop at any position, but also to improve the operating performance of the valve. Special butterfly valve for industrial characteristics can resist high temperature and high applied pressure range, the valve nominal through large diameter, and the use of carbon steel valve manufacturers, valve plate sealing ring using the metal ring instead of rubber ring. Large high temperature butterfly valve using steel welding manufacturing, mainly used for high temperature flue gas channel and gas pipe.
Quick Details
Standard or Nonstandard: Standard Structure: Gate Pressure: Medium Pressure Power: Manual Material: Casting Temperature of Media: Medium Temperature Media: Water Port Size: DN40mm-DN300 Place of Origin: China (Mainland) gate valve: Resilient Seated Flanged Cast iron gate valve: DI gate valve Packaging & Delivery
Packaging Details: air plastic bag inside/wooden box outside
Delivery Detail: 15--60days
Specifications
Resilient Seated Flanged gate valve
resilient gate valve F5
1.size:DN40-DN300
2.medium:water
3.certificate:ISO9001 CE
4.standard:DIN
available medium:water
working temperature:≤80oC
flange dimensions:DIN2501
face to face dimensions:DIN3202F5
- Q:What does "Z45W-10T" mean?What does each letter stand for?
- T is the material code for the valve body, which stands for copper and copper alloysZ45W-10T, which means manual, flange connections, dark wedge rigid single gate plate, the valve seat sealing surface material directly processed by the valve body, nominal pressure PN10, valve body material for Brass Gate Valve
- Q:Does the tap belong to a stop valve or a gate valve?
- When the valve is installed, the medium can enter from the bottom of the valve core and enter the two way from the top. Medium from the spool into the advantages of the valve closed when the packing is not under pressure, can extend the service life of the packing, and can be pressure in front of the valve in the case of replacement of packing work. Medium from the spool into the bottom of the shortcomings of the valve driving torque is larger, about 1.05~1.08 times above the entrance, the stem by the axial force of large, easy to bend the stem. To this end, the media from below to enter the way, generally only applicable to small caliber manual stop valve, to the valve closed, the media acting on the spool of force is not greater than 350kg limit. Electric cut-off valve is generally used to enter the media from the top way. The disadvantage of the medium entering from the top is just the opposite of the way it is entered below.Compared with the gate valve, the utility model has the advantages of simple structure, good sealing performance, and convenient manufacture and maintenance. The disadvantage is that the liquid resistance is large, and the opening and closing force is large. Gate and globe valves are fully open closed type valve, cut off or connected as the medium use, not as a control valve.The range of application of stop valves and gate valves is determined by their characteristics. In the smaller passages, the cut-off valve is used when required for better shutoff; in the steam pipe and the large diameter water supply pipe, the gate valve is generally used because of less fluid resistance.
- Q:What do you mean by gate valve type RVHX-0150-10 and Z45X-16Q?
- Z45x-16q, Z means gate valve, 4 means flange connection, 5 refers to dark rod gate valve, X means rubber seal, 16 refers to nominal pressure 1.6MpaRVHX means manual gate valve, 150 refers to the caliber of DN150, and 10 indicates nominal pressure of 1.0MPa
- Q:What is the difference between a flanged gate valve and a wire gate valve?
- Threaded valve is via the wire or wire is connected with the pipeline, a small general air for the air valve, all belong to this
- Q:What is wire feed gate valve? What do you say in French?
- Should refer to the threaded valve. Refers to the valve body with internal thread or external thread, and pipe thread connection. Also called thread valves, threaded valves, valves within the toothFlange gate valve is connected to the flange gate valve, this connection is the most common way.We also introduced a lot of threaded valve, can go to the front pages.The main difference is the threaded valve connectionI only know their English, I'm sorry I can't help youBox thread valveFlange valveThreaded valve, screw connected with the valve, should be said that the former is the most professional.
- Q:Why does the centrifugal pump start and stop in the case of closing the gate valve?
- The centrifugal pump starts and stops in the case of closing the pump outlet valve. Start off the pump outlet valve is to reduce the starting current, stop when the pump is closed, the outlet valve is to reduce water hammer, prevent blade from bad.
- Q:Fire protection gate valve from the wall how many distance there is no regulation?
- Don't know don't answer. "According to the provisions of article 6.2.13 GB50038-2005" code for design of basement for civil air defense engineering, into or through the door unit between the door closed wall should be set up in the inner side or two nominal pressure pipeline is not less than 1.0MPa, the spool is stainless steel or copper gate or globe valve water pipe from the air enclosure structure. The installation position from the wall should be not more than 200mm.
- Q:what are their applicable conditions? Advantages and disadvantages?
- Butterfly valve is a disc type of open and close parts reciprocating reciprocating about 90 degrees to open, close and adjust the fluid channel of a valve.Advantages: the butterfly valve has the advantages of simple structure, small volume, light weight, material consumption, installation of small size, and torque is small, simple and rapid operation, and also has good flow characteristics of regulation and sealed off, is nearly 10 years the fastest growing valve, high temperature and high pressure, and to large diameter, high sealing function of the direction, long life, good adjusting features and a valve development.Disadvantages: the butterfly valve relative to the gate, ball valve pressure loss is relatively large, it is suitable for pressure loss requirements lax piping system.Under normal circumstances, it is not suitable for high temperature and high pressure pipeline system.Valve is closed parts (valve) moving along the centerline of the valve seat, the valve stem to open or close the trip is relatively short, but very reliable cut off function, and because changes in the valve seat and the valve stroke is proportional to, is also very suitable for the regulation of traffic.Advantages: in the process of opening and closing, the friction between the disc and the valve body is smaller than that of the gate valve, so it is wearableThe opening height is generally only 1/4 of the diameter of the seat channel, so it is much smaller than the gate valveGenerally, there is only one sealing surface on the body and disc, so the manufacturing process is good and easy to maintain;Disadvantages: the flow resistance coefficient is relatively large, resulting in pressure lossUnsuitable for large caliber productionThe opening and closing moment is larger and the structure length is longer.
- Q:What are the advantages and disadvantages of flat gate valves?
- The disadvantage of flat gate valve is that when the medium pressure is low, the sealing force of the metal sealing surface is insufficient, so as to achieve satisfactory sealing. On the contrary, when the medium pressure is high, if the sealing surface is not lubricated by the system media or foreign media, often opening and closing may cause the sealing surface to wear too much. Another disadvantage is that the circular motion of the circular gate in the circular flow, only when it is at the valve closed position of 50%, this valve is more sensitive to flow control. Moreover, the gate will produce severe vibration when it breaks the high-speed and dense medium flow. The valve seat can also be throttled if the seat is made of a V - shaped opening and is tightly oriented to the gate.
- Q:What are the working principles of the electric gate valve?
- Ordinary type electric valve should be equipped with the control box, the motor is the true story and the inversion, and in general to a trip signal signal is normally open and normally closed, closed in place are normally open and normally closed two points according to their own needs wiring, three lines and then open and close control of the line of control there are also 4 lines to control some manufacturers, as well as the valve position, some three lines connected with the potentiometer, some installed valve position transmitter is connected with two lines, and over torque protection fault signal.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
cast iron gate valve wooden box outside Standard Structure: Gate Pressure: Medium
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 9999 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
