Brief Introduction of CASE type Diol Polyether Polyol C2010

C2010 is polyether polyols with  low functionality and long chain. It is suitable to produce PU elastomers, adhesive,coatings. Also it can be used as chemical intermediates, defoaming agent.

Applications of CASE type Diol Polyether Polyol C2010

It is used for the PU elastics part, Adhesive, coating and waterproofing product etc.

Advantage of CASE type Diol Polyether Polyol C2010

Low functionality                         

High molecular weight                         

BHT-free                               

Hydrolytically stable

Main Specification of CASE type Diol Polyether Polyol C2010

OHV (mgKOH/g)：108.5-115.5
Viscosity (mPa•s，25℃)：100-200
K+ (ppm)：3
Water Content (%)：0.05

Package of CASE type Diol Polyether Polyol C2010

Iron pail with zinc coating in standard container can be obtained, IBCs,tank containers or road tankers can also be supplied, if necessary.

FAQ:

1, Storage of CASE type Diol Polyether Polyol C2010:

This product should be stored in an closed container produced with steel, aluminum, Pe or PP, and nitrogen is suggested to fill in the containers. Moist and wet condition should be avoided, the temperature of the storage condition should be lower than 50 Degree C. and keep away from sunlight, water and heating. Above 60 Deg. C, a deterioration will happen. Short term warming or cooling of the product will not damage the product.

2, Shelf Life of CASE type Diol Polyether Polyol C2010:

Under recommended storage conditions, shelf life will be 12 months after the production.