High Quality Black Silicon Carbide/SIC/Carborundum 90% Raw Materials for Refractory
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Black Silicon carbide/SiC/Carborundum 90% with high quality
1.Structure of Silicon Carbide Description
Black Silicon Carbide is produced with high temperature in a electric resistant furnace from a mixture of quartz sand and petroleum coke.
Black silicon carbide is typically used for working on cast iron ,non-ferrous metals, stone, leather, rubber, and other materials which requires sharp cutting characteristics. The mineral is also used widely as a refractory material and metallurgical additive.
2.Main Features of the Calcined Bauxite
Its hardness is between that of fused alumina and synthetic diamond and mechancial intensity of it is also greater than that of fused alumina. It is brittle and very sharp and has a certain degree of electrical and heat conductivity.
3.Main usage of the Calcined Bauxite
1.Grinding non-ferrous materials, rock, stone, leather, rubber, finishing tough and hard materials
2.Bonded abrasive tools, lapping and polishing
3.Widely used as a metallurgical additive and refractory material
4.Refractory
4. Calcined Bauxite Images
5. Calcined Bauxite Specification
Specifiction | SiC | F.C | Fe2O3 | Moisture |
SiC 86 | 86%min | 2.4%max | 2.0%max | 0.2%max |
SiC 88 | 88%min | 2.3%max | 2.0%max | 0.2%max |
SiC 90 | 90%min | 2.0%max | 1.8%max | 0.2%max |
SiC 92 | 92%min | 1.8%max | 1.7%max | 0.2%max |
SiC 93 | 93%min | 1.8%max | 1.6%max | 0.2%max |
SiC 95 | 95%min | 1.0%max | 1.3%max | 0.2%max |
SiC 97 | 97%min | 0.8%max | 1.2%max | 0.2%max |
SiC 97.5 | 97.5%min | 0.8%max | 0.9%max | 0.2%max |
SiC 98 | 98%min | 0.5%max | 0.5%max | 0.2%max |
6.FAQ of Calcined Bauxite
1). Q: Are you a factory or trading company?
A: We are a factory.
2). Q: Where is your factory located? How can I visit there?
A: Our factory is located in Ningxia, China. You are warmly welcomed to visit us!
3). Q: How can I get some samples?
A: Please contact me for samples
- Q: What is refractory brick?
- Capability1. Refractory brick is also known as firebrick. It is faint?yellow or brownish. Refractory brick with 770 ℃ at high temperatures is called for short firebrick. It is mainly used for building and smelting furnace. It is a refractory material made by fring refractory clay or other refractory material.
- Q: Technical scheme of refractory for refuse incinerator
- Design of refractory for incineratorAccording to the condition of incinerator, the requirements of refractory, the temperature of each part and the temperature of outer wall of shell are discussed. The scheme for using refractory materials is as follows:The furnace body is made of two layers of structure, that is, 114mm thick clay brick is built near the steel shell, and the lining is made of 134mm thick graphite brick.
- Q: What are the fire protection standards of insulation materials?
- According to the three versions of GB8624 (1997,2006,2011), the fire rating of external walls can be basically divided into: A1-, A2-, B1-, B2-, B3-level. The detailed divisions are determined by many technical indicators. It is a very professional and technical long story. Please contact QINGDAO SHANFANG INSTRUMENT CO., LTD for detail information, they are specialized in manufacturing fire rating testing instruments of external walls.
- Q: What kind of fireproof material is used for steel structure?
- Steel is a building material that does not burn, it is shock resistant and anti-bending. In practice, Steel can increase load capacity of the building, but also add asthetic beauty to the architecture design; Unlike concrete, it can bend and stretch. Therefore, the steel construction industry has been favored, such as one-story or multi-story buildings, skyscrapers, factories, warehouses, waiting rooms and waiting hall, which is the common use of steel. However, the steel as building materials has unavoidable defects in fire prevention, its mechanical properties such as yield point, tensile strength and modulus of elasticity, decrease abruptly due to temperature rise.
- Q: what are the requirements of fireproofing material?
- The producing process of fire and moth proof wood: firstly, put general wooden materials into solution with calcium, aluminum and other cations, then soak it into the solution with phosphate radical, silicate and other anions. Thus, the two ions will be carried out chemical reaction in the wood, forming a ceramic-like material, and intimately fill the voids of cells, so that the wood has the fireproofing and mothproof properties.
- Q: What's the poured refractory material?
- According to the volume density, it can be classified as follows: Heavy (>2.0g /cm3), medium heavy (1.0-2.0g/cm3), light (0.4-1.0g/cm3); classified by binding agent: hydraulic bond, chemical bond, coagulation binder, hydraulic and coagulation binder; classified by material: material of clayey, high alumina, silicious, magnesian, alumina-magnesia, magnesian-chrome, magnesia-zirconia, silicon carbide-based, etc.
- Q: Who knows about the grade C fireproof door materials?
- There are no differences in the interior materials of the grade A , B and C fire doors, they all use fire?rock?wool?boards. The only difference is the thickness of built-in fire rock wool boards. The rock wool boards' thickness of grade A fire doors is 52 mm, that of grade B is 46mm, and that of grade C is 40 mm.
- Q: What are the technical requirements for refractories?
- To put it simply, physical indicators are pores, volume density, pressure resistance, slag resistance, thermal shock resistance, foot expansion coefficient, thermal conductivity, oxidation resistance and so on. If it is castable, the indicators are mobility, water rate, setting time, and anti bending strength. If it is coating mix, the bonding strength should be checked. Chemical indicators are loss of ignition and the content of aluminum, magnesium, silicon, calcium, chromium, titanium and carbon.
- Q: Can anyone tell me what is a high alumina refractory?
- High alumina refractories: High-alumina refractory products have high refractoriness, compressive strength and refractoriness under load, which are used for building the high-temperature parts of various large blast furnaces, such steelmaking furnace, airheater, electric furnace, rotary?kiln and other thermal equipment.
- Q: Where is the development of refractory industry?
- Refractories for continuous casting is an important part of the continuous casting machine, in addition to the characteristics of general refractory material, also for the purification of molten steel and improve the steel quality, stable molten steel temperature and composition, control and regulate the flow of the molten steel and other functions, so it is called functional refractories.
Send your message to us
High Quality Black Silicon Carbide/SIC/Carborundum 90% Raw Materials for Refractory
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
