Architectural Wood Veneers - High Quality Low Carbon Wood 005
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000 sq.m, m²
- Supply Capability:
- 400000 sq.m. Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General information of low carbon wood
|
Raw material |
Sawdust, corn-straw and tailing, can be recycled after using. |
|
Technology |
Utilizing molecular structure of crystalline-state solidification, shaping under normal temperature and pressure with low carbon emission. |
|
Installation |
Stitching, wet-sticking and dry-fasten connecting |
|
Character |
Favorable corrosion resistance, non-ignitable, water-proof, UV-resistant, high resistance to fire, water and insects. |
|
Lead time |
30 days after receiving buyer's original L/C or Prepayment |
|
Package |
Seaworthy Export Standard Wooden Pallet |
|
Four breakthroughs |
Comprehensive utilization of natural resources: Be recyclable, using sawdust, corn-straw and tailing as materials. The product can be recycled after using. |
|
Low carbon and energy saving in the course of production: Adopting the independent individual property’s technology, utilizing molecular structure of crystalline-state solidification, shaping under normal temperature and pressure with low carbon emission. | |
|
Environmental and healthy in the course of construction and using: Synthesized by natural inorganic raw materials, nontoxic, odorless and non-radiative simple installation, which could save energy cost and reduce and waste emission, raise efficiency and reduce erection time. | |
|
From nature, beyond nature: Full realization of the natural texture, high resistance to fire, water and insects. Do not rot or fade after long time usage. Super self-cleaning needs low maintenance cost. Vivid color and appearance provides a wide space to designers. | |
|
Six advantages |
Lower more than 50% cost, enhance building's performance to price ratio. |
|
Cutting at will, Fixing easy, Shorting project time. | |
|
Good performance in resistance to elements, corrosion-resistant ,resistance to termite, fire resistance and water-resistant, far from distortion and discolorations in 30 years. | |
|
Well self-cleaning, low cost in later maintenance: Don't need professional maintenance in 30s(Cleaning with water only), saving much cost. | |
|
Customize the color, showing individuation: Beyond 400 kinds of colors, designers could exhibit their imagination. | |
|
Compound with natural inorganic materials: Without formaldehyde and toluol, sustained releasing negative oxygen ion, forming nature oxygen bar. | |
|
Special specifications are available on customers' requirements. | |
Specification of low carbon wood
Standard: 3000mm(L)×1200mm(W)×15mm(T)
Standard length: 3000mm
Standard width: 120mm,150mm,200mm,300mm(including 3mm kerf width)
Standard thickness: 15mm
Technical information of low carbon wood
|
Density |
1.26g/m3 |
Folding strength |
10Mpa |
|
Dry-shrinkage rate |
0.05% |
Elastic modulus |
7211Mpa |
|
Wet expansion rate |
0.17% |
Shear strength |
3.5Mpa |
|
Screw holding capability |
121N/mm |
Coefficient of heat conductivity |
0.69(W(m·k)) |
|
Frost resistance |
Thaw-freeze cycle after 30 times, no slip crack and peeling off | ||
|
Unpermeability |
No drop appearing on the bottom after 24 hours. | ||
|
Impact strength |
3.3KJ/m2 | ||
Products exhibition of low carbon wood
Low carbon wood sheets with thin grain
Low carbon wood sheets with thick grain
Project picture of low carbon wood
- Q: Simple construction method of veneer
- . In order to paste the veneer, the optional paint for paint, make it bright or hyperchromic.
- Q: Slicing of thin slices of wood
- Of the wooden side should be promptly placed in the paver before the wood temperature of the tank,
- Q: The following table lists the cooking criteria for several types of wood,
- The most widely used is the drum dryer. Comparison of thin wood, especially the thickness of less than 0.4mm of thin wood, must use a belt dryer.
- Q: Technology veneer and natural veneer distinction
- This is the case all over the world. This is not to say. All understand. Technology veneer although there is no natural veneer texture naturally nice.
- Q: Brief description of veneer production process
- ; after cooking treatment; the cooking process should be reduced to more than 40 ℃, it should slow down the heating rate
- Q: Wooden door with veneer ruled, pattern is produced by different cutting methods
- Rotary Cut - Install the logs in the center of the lathe, insert the knife at a slight angle, and then rotate the logs against the slicer to create a revolving veneer
- Q: Veneer has a very affordable, versatile features
- With the current shortage of natural timber resources, as well as the price of high-grade tree species is climbing
- Q: What are the quality items of veneer piles?
- by the bark part is later growth, material color deep, Dense, hard material, said latewood (autumn wood, summer material)
- Q: The Sliced ??veneer manufacturing process
- Wood → truncated → cut → softened (steamed or boiled) → slicing → drying (or not drying) → cutting → inspection packaging → storage
- Q: What are the specifications for veneer?
- The price is usually longer and more expensive. The thickness of the thinest 15 silk, thick more than one hundred silk
Send your message to us
Architectural Wood Veneers - High Quality Low Carbon Wood 005
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000 sq.m, m²
- Supply Capability:
- 400000 sq.m. Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
