2 AWG Aluminum Wire - Aluminum Titanium Boron /Alti5B1 Ingots/Coils/Rods/Bars
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m.t.
- Supply Capability:
- 8000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.AlTi5B1 Aluminium alloy Introduction:
.Aluminium titanium boron alloy mainly used for aluminium and aluminium alloy grain refining., improve performance and surface
Quality, add conveniently, little amount can make excellent effect, universally available in aluminium casting, aluminium profile, aluminium cable, aluminium foils.
.AITi5B1 wire grain refiner produce strong refining results to aluminium and its alloy and with a remarkable effect. Leading to even cast ingot organization, reducing segregation, eliminating Planktonic feather crystal, flaw, and make it reach first- degree grain size.
2.Chemical Composition
Alloy | Composition (%) | |||||||
Ti | B | Fe | Si | V | impurities | Balance | Form | |
AlTi5B1 AlTiB5/1 | 4.5-5.5 | 0.9-1.1 | 0.30 | 0.20 | 0.20 | 0.10 | Al | Coil, rod, piglet |
AlTi3B1 AlTiB3/1 | 2.8-3.4 | 0.9-1.1 | 0.30 | 0.20 | 0.10 | 0.10 | Al | Coil, rod, piglet |
AlTi5B0.2 AlTiB5/0.2 | 4.5-5.5 | 0.15-0.25 | 0.20 | 0.30 | 0.25 | 0.10 | Al | Coil, rod, piglet |
AlTi5B0.6 AlTiB5/0.6 | 4.5-5.5 | 0.5-0.7 | 0.30 | 0.20 | 0.20 | 0.10 | Al | Coil, rod, piglet |
3.Physical Specification
All products are checked by eddy flow while producing, each coil complies with:
Size and Quantity | 180kg ±10kg |
Inner diameter(mm) | 360±25 |
Outer diameter(mm) | 710 |
Breadth(mm) | 280±25 |
Weight(kg) | 180±20 |
4.Grain Refining
AlTi5B1 must be in accordance with the following extreme limit:
Average grain(µ) | Thesumsettle | The highest | Time |
AlTi5B1 | 250µ | 400µ | 2min. |
AlTi3B1 | 300µ | 450µ | 2min. |
AlTi5B0.6 | 350µ | 500µ | 2min. |
AlTi5B0.2 | 450µ | 600µ | 2min. |
5.Pictures
5.FAQ
We have organized several common questions for our clients，may help you sincerely：
①How about your company？
A world class manufacturer & supplier of castings forging in carbon steel and alloy steel，is one of the large-scale professional investment casting production bases in China,consisting of both casting foundry forging and machining factory. Annually more than 8000 tons Precision casting and forging parts are exported to markets in Europe,America and Japan. OEM casting and forging service available according to customer’s requirement.
②How to guarantee the quality of the products？
We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
③How long can we receive the product after purchase?
In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The pecific time of receiving is related to the state and position of customers.Commonly 7 to 10 working days can be served.
- Q: What kind of welding machine is used for welding aluminum wire?
- Can the use of imported equipment, try the inverter movement, but should not welding, this requirement is almost not up to
- Q: Why aluminum wire immersed in copper sulfate solution, static?
- Observed phenomenon: the aluminum filament appears purple red solid, the aluminum filament becomes smaller gradually, the solution gradually turns from blue to colorless
- Q: The difference between traditional resistance welding and aluminum wire welding
- Mainly used for welding large modules,Resistance welding is the use of current through the base material, because the parent material resistance and heat generated by welding methodsMainly used for higher precision, more stringent appearance of the workpiece,
- Q: While wearing a mask, a halitus how to not let the glasses?
- Pull the upper edge of the mask to the nose cap and pass through the nose. Use the glasses on the respirator and press the respirator. When you breathe, feel the air flow down, so that will be fine
- Q: Home wire, can not use aluminum thread?,
- Open line is absolutely ok! Dark or copper wire is recommended! You mentioned above, these appliances are very small power, four square aluminum enough, but the aluminum must pay attention to the connector must be connected, otherwise it will contact bad, causing accidents!
- Q: Why not use copper, iron, aluminum wire instead of fuse?
- Their melting point is greater than or equal to the melting point of the wire, so it can not cut off the current. It burns the circuit or electric appliance. Therefore, copper, iron and aluminium wire can not be used instead of the fuse
- Q: A year ago by a ten cm long metal wire, does much harm to the people?
- Aluminum is not a basic component of the human body. In recent years, due to advances in epidemiological studies, aluminum has been shown to be potentially harmful to the nervous system of the human body. In 1998 the United States Environmental Protection Agency (EPA) will be included in the list of aluminum contaminants in drinking water, and made the following statement: it is very necessary to do more research on the risk properties of aluminum pollution in drinking water, because the aluminum are widely distributed, recent studies have found that it is related to Alzheimer's disease, the potential impact of the nervous system the United States Environmental Protection Agency, argues for the necessity for further investigation, and the potential long-term neurological toxicity of aluminum to set an appropriate not observed adverse reaction concentration. Based on this, the United States Environmental Protection Agency (EPA) announced the standard value of aluminum in drinking water 0.02-0.2mg/L, WHO in its newly revised "drinking water quality standards" set the standard value of aluminum 0.2mg/L. The published aluminum target value is 0.2mg/L/ and stressed that if there is more than the standard of the Member States must confirm whether exceed the standard will bring the risk to human health, it is necessary to protect human health of the water to take remedial measures to restore water quality. There is no aluminum index in the standard of living and drinking water issued in 1985. In 2006, the new standard of hygiene for drinking water increased the allowable concentration of aluminum to 0.2mg/L.
- Q: How can I adjust the steel bar? Do you have any tips?
- Straightening steel bar, you can use a special straightening machine.
- Q: Is the resistance of metal wire plastic increased when it is plastically deformed?
- When the steel is cold working, the plastic deformation will increase the dislocation and the resistance will increase slightly. Aluminum wire and copper wire processing at room temperature is also hot processing, will not increase the resistance, for reference purposes only
- Q: Aluminum wirMay not be related to the type of lubricant chosen.e through the mold, why not bright?
- Suggest you use BW-500F aluminum acid degreasing agent, and BW-286 aluminum chrome free passivation agent collocation, the treatment of aluminum wire surface bright and form a layer of conductive passivation film, the effect is good.
Send your message to us
2 AWG Aluminum Wire - Aluminum Titanium Boron /Alti5B1 Ingots/Coils/Rods/Bars
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m.t.
- Supply Capability:
- 8000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
