Raw Materials for Refractory:AL2O3 85% 1-3mm Rotary Kiln Calcined Bauxite for Refractory Castables
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 2000 m.t./month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Quick Details
| Place of Origin: | Shanxi, China (Mainland) | Shape: | Powder | Material: | Raw Buaxite |
| SiO2 Content (%): | 6.5%-10% | Al2O3 Content (%): | Al203:85%,86%87%88% | MgO Content (%): | 0.8-1.2 |
| CaO Content (%): | 0.01 | Refractoriness (Degree): | Common (1580°< Refractoriness< 1770°) | CrO Content (%): | 0.1~0.3% |
| SiC Content (%): | 0.1~1.4% | Model Number: | ZYD1508 | Brand Name: | OEM |
| color: | dark grey | CaO+MgO: | 0.5Max | size: | 0-1, 1-3, 3-5, 0-50 mm, 90% min |
| B.D.(g/ccm): | 3.10-3.25 | TIO2: | 4%MAX | FE2O3: | 1.8-2%MAX |
| K2O+NA2O: | 0.25%MAX |
Packaging & Delivery
| Packaging Details: | 1.25MT BIG BAG OR BY BUYERS REQUIREMENT |
| Delivery Detail: | 15-20DAYS |
Product Description
Al2O3 | Fe2O3 | SiO2 | TiO2 | K2O+Na2O | CaO+MgO | B.D (g/ccm) |
min | max | max | max | max | max | min |
88% | 1.8% | 6.5% | 4% | 0.25% | 0.5% | 3.25 |
87% | 2.0% | 7.0% | 4% | 0.25% | 0.5% | 3.15 |
86% | 2.0% | 7.0% | 4% | 0.25% | 0.5% | 3.15/3.10 |
85-80% | 2.0% | 10.0% | 4% | 0.30% | 0.5% | 3.10 |
Factory overviews
Laboratory
Packaging & Shipping
- Q: Where is the sizing nozzle for refractories? Just enter the line, master into!
- Refractories in this industry, Luoyang Hua Heng is the first to bear, and their services are thoughtful, and the quality is still very good!Wish you success！
- Q: Is the linear change on reheating the same as heating permanent linear change of refractory material?
- “+”represents expansion. the afterexpansion and aftercontraction after cooled to be at room temperature. The change may significantly damage the masonry of thermal kiln. There are regulations on the linear change on reheating of common refractory material in the national standard. Some physical chemical changes may continue. It is defined as the change from being heated to the specified temperature of refractory material sample. Heat preserving for a while till afte cooling to be at room temperature, then the residual will expand or contract in its length, heat preservation for a while, organization vitrification, the irreversible changes of its length refers to heating the firing refractory to be at high temperature, so as to make the volume of refractory materials expand or contract, due to the influence of uneven temperature or lack of time, otherwise it will cause the deformation of the refractory ball and make this indicator within standard even reach smaller value, so firing control must be strengthened in product production. But it is should not be too high. For refractory materials with same chemical composition, the linear change on reheating is produced in the heating process. Properly increasing sintering temperature and prolonging the holding time is an effective process measures, make its firing inadequate. When subjected to high temperature, it can reduce the thermal shock resistance. Minus sign "-" represents contraction. The permanent line rate refers to heating the fire refractory ball to the specified temperature. Linear change on reheating, also known as residual linear change, is an important indicator to assess the quality of refractory in the long time use. To control the permanent line rate within the standard or reach the minimum value.
- Q: Who can introduce the external wall thermal insulation materials fire rating regulations?
- 1. The thermal insulation material of level A combustion performance: Rock wool, glass wool, foam glass, foamed ceramics, foam cement, hole-closed perlite, etc. 2. combustion performance is level B1 insulation materials: Extruded polystyrene board (XPS) after special treatment / Special treatment of polyurethane (PU), phenolic aldehyde and gelatine powder polyphenyl granule 3 combustion performance is level B2 insulation material: Molding polystyrene board (EPS), extruded polystyrene board (XPS), polyurethane (PU), polyethylene (PE), etc. See the 2009 edition construction technical measures 4.3.6 Level A insulation material is only for fireproofing, but its thermal insulation performance is not better than organic XPS \\ EPS and other materials. I feel the best insulation materials should be modified phenolic board, which can keep insulation and fireproofing, but the unit price is very expensive. Insulation materials in the domestic market have some disadvantages, it is better to considere the materials within the acceptable range in the building needs.
- Q: Who knows how many kinds of fireproof insulation materials are there in the market?
- The so-called A-level materials in fire insulation materials, namely, the WW non-combustible insulation materials, and the WW material s are A-level. Inorganic fireproof and thermal insulation materials can be used as wall insulation materials to replace red bricks, therefore, they, as thermal and cold insulation materials, can reduce the thickness of walls, and save energy, as well as expand applicable areas indirectly, decreased structure weight. They are very good.
- Q: Fire resistance and evaluation of refractory for casting
- The products to be tested are broken and ground, adding organic binders (usually dextrin) that do not affect the refractoriness. Water is used to make standard sized test cones, as shown in figure 1-2-1. Test cone is positive, three edge cone, the bottom side length of 8.5mm, the top side length is 2mm.Test, the equivalent of high standard cone refractoriness of the 2 products to be high, No. 1 and No. 1 high temperature low standard cone of each one, and the 2 to be tested in accordance with regulations frustum cone plug made of high aluminum material, a cone prism and vertical 8 degrees. 1 degrees tilt angle. Then, the cone is heated in a high temperature furnace. When the test cone with a high temperature and bending down to the standard cone top contact cone, the high standard cone refractoriness refractoriness is running.
- Q: What thickness is needed of the ultra-thin fireproof paint with a fireproof time of 2.5 hours?
- The thickness of steel structure fire retardant coating hasn't been regulated in the steel structure application specification (CECS24:90). The above thickness refers to a certain thickness that must (at least) achieve a certain time of the fire resistance. The thickness of fire-retardant coating in engineering is generally determined according to factory inspection report. We use thin steel structure fire retardant coating: 2.5 hours' fire resistance with the thickness of 4.9 mm; 2.0 hours' fire resistance with the thickness of 3.5 mm; 1.5 hours' fire resistance with the thickness of 1.75 mm; 1.0 hours' fire resistance with thickness of 1.17 mm. I hope I can help you.
- Q: Who knows the highest temperature the high-temperature refractory coating can resist?
- When coating the fire-resistant coating on a steel beam of a building, paint film thickness reaching 2mm, and steel beams in the building are on fire, the fire-resistant coating can withstand for two hours. Fire-resistant coating is passive fire protection materials painted on the surface of the protected objects (eg. steel structure) , which can be divided into types of thick, thin, ultra-thin and facing according to the thickness. It can be divided into water-based and solvent-based products by medium. Whatever the structure of the building is, it will collapse if it is on fire for a long time. Fire-resistant coating function as isolation layer on the surfaces of the protected objects, delaying the building collapse time to win over valuable time for rescue and fire fighting. I hope this answer can help you.
- Q: What are the materials used in refractory material processing?
- From the raw material and refractory materials can know, silicides, corundum, clay, diatomite, asbestos, metal oxides, sulfides, carbides and so can be used in the production of refractory material processing, processing of raw materials and refractory material can be used in mechanical equipment, according to production fineness crushing machine, packaging machine equipped with lifting machine, milling machine, so, the complete set of processing production line of refractory raw materials.
- Q: how long is the fire endurance of plasterboard?
- Gypsum board is flame retardant materials, combustion performance rating B1, but when mounted on a steel joist, it can be seen as rating A(non-combustible material) . So it is fine to use as a ceiling. You can randomly choose several samples to run some tests at the quality inspection insititute and the quality of these samples are subject to the testing results.
- Q: What is fire retardant coating mainly used for?
- Fire retardant coating is a coating which is applied to the surface of buildings and structures and can form a protective layer of fire retardancy and thermal insulation. It can reduce the flammability of the coated materials and block the rapid spread of fire so as to improve fire endurance of the coated materials. Features of fire retardant coating: (1) Fire retardant coating itself has a flame-retardancy or non-inflammability, and it can prevent the protected substrate from direct contact with the air, and delay ignition and reduce the burning speed of the objects. (2) In addition to flame retardancy or non-inflammability, the fire retardant coating itself has a a low thermal conductivity, which can delay the transfer of flame temperature to the substrate to be protected. (3) When heating, fire retardant coating decomposes non-combustible inert gas to dilute the combustible gas decomposed by the protected, making it difficult to burn or slow down the burning rate. (4) Fire retardant coating containing nitrogen will decomposite NO, NH3 and other basic groups, which compound with the organic radicals and interrupt the chain reaction so as to reduce the temperature. (5) intumescent fire retardant coating will expand and foam when heating, and form a carbon foam insulation to block the protected objects, thus delaying the transmission of heat to the substrate.
Send your message to us
Raw Materials for Refractory:AL2O3 85% 1-3mm Rotary Kiln Calcined Bauxite for Refractory Castables
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 2000 m.t./month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
