ACM / Alucobond / Composite Panel for buliding caldding
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 700 PCS
- Supply Capability:
- 120000 PCS/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specification
Thickness | 3mm--6mm |
Width | 1000--2000mm,recommended:1220,1250,1500,2000mm |
Panel length | up to 5800mm,recommended:2440,3050,4050mm |
Aluminum thickness | 0.1mm--0.5mm |
2.Features
1) Self-cleaning
The dirt will not be easily attached to the surfact because of the compact coating, and it would automatically break down under ultraviolet light
2) Stain resistance, high strength, smooth surface, easy for maintenance
3.Raw Material
1)Aluminum base material: high strength aluminum alloy sheet
2)PE core material: non-toxic low-density polyethylene
3)Protective film
4. Application scope
1) Building exterior curtain walls..
2) Decoration and renovation additions for old buildings
3) Decoration of interior walls, ceilings, bathrooms, kitchens and balconies
4) Shop door decorations
5) Advertisement board display platforms and advertisement board
6) Wallboards and ceilings for tunnels..
7) Industrial materials, materials for vehicles and boats
- Q: Why does the endothermic glass be cool in winter and cool
- Can reduce the amount of solar heat entering the room through the glass, which is achieved by increasing the reflection of the sun (not necessarily the reflection of the visible light) and the heat absorption of the glass. The general color film mainly functions by increasing the absorption of sunlight , These colors can absorb the sun on the glass, thereby reducing the solar energy into the room. This film is only an auxiliary effect compared to our building insulation glass film. Building glass film covered with a layer of metal, this metal film, can increase the glass of light reflection and light absorption, which greatly blocked the solar heat in the glass window, the same reason, in the winter can make high temperature indoor heat is not out , To ensure comfortable indoor temperature.
- Q: Alright, so I want to build an under seat sub woofer enclosure for my smaller sports coupe. There's not much room at all under the seats, so I was thinking about going with a Pioneer 8" shallow mount sub, but the box is causing me a bit of a headache. I haven't had a chance to take a measuring tape to it, and doing so would be difficult.My idea is to get a can of the spray foam stuff used to seal homes, to inflate a garbage bag under the seat. After letting it sit and dry for a while, I'll remove the seat, pull the bag out with the exact dimensions of my seat and then play from there. I'll take the bag off of the foam and probably sand it down from there to fit my needs. I'll then use fiber glass to build up the box from the foam mold.Any thoughts on better ways to do this?PS: The car is a 2000 Mercury Cougar incase anyone has actual dimensions.
- you can take the seat out and then use a think foil paper and line under the seat then put a thin layer of fiber glass then let it dry and go from there also. * remember when your using the fiberglass your also gonna want to put a layer of bondo to strengthen the box but you do have a good idea also what ever works.
- Q: I wanted to build a glass ant farm but instead of using wood or plastic for the frame I wanted to use molding clay. Can I use the clay to build the frame to hold the two pieces of glass and to make a removable top or will it hurt my ants???
- Using plaster would be better than clay. Fired ceramic clay would also be fine, but that gets fairly complicated. If you use plaster it will be fairly easy, but you have to build a frame for your ant farm out of wood or use a suitably sized plastic or strong cardboard box. You could take a plastic box, put one plane of glass down. Use modeling clay to make the chambers for your ant farm. Make sure you connect them. Then mix plaster and cover everything so high you can still see your chambers. Put second pane of glass on it. After plaster has set, you should be able to remove one pane of glass, get out the modeling clay, then put the pane back on, you can use small clamps if necessary. Plaster is pretty good for an ant farm since it soaks up water. You don't want an ant farm to be absolutely dry, that isn't good for the ants. They need a certain humidity. Of course you don't want it really wet either, you'll have to observe the ants to see what they prefer. You can water the ant farm periodically or put one side into water so it soaks up some water. You also have to move the ants to a new ant farm once in a while, since the ant farm will become dirty. Make sure you feed the ants proteins and not just sugar. Make sure you have an ant queen. A good way to start an ant farm is to collect a queen if you see one outside. Since ants swarm, that is a good time to find a lot of queens. Make sure the queen doesn't have wings any more, only then she is mated.
- Q: Thickness and specification of glass curtain wall in architectural drawings
- The third layer is 8mm thick glass
- Q: how does one not have foggy glasses when entering a building?
- wear contacts OR don't wear the glasses OR wipe your glasses when they are fogged up.
- Q: Are building glasses exhibited at Guangzhou Aluminum Window, Door & Facade Expo?
- yes, at the Guangzhou aluminum windows fair, you will see all types of building glasses including low-E glass, insulating glass, fire-proof glass, Heat reflective coated glass, Tempered Glass, Silk-screened Glass Laminated glass, Glass Flooring , Curved tempered glass, building glass film, solar-energy BIPV, molecular sieve, warm edge strip and other insulating glass interval products ., etc
- Q: any home remedies to get the buildup on glasses off? i use jet dry and it's suppose to help but nothing does..it's nasty!
- Wash them by hand once and then try the jet dry again. IT could just be some serious soap build up or it could be etching in the glass.
- Q: Why do you need 3C certification for tempered glass?
- 3C certification has now covered tempered glass. Most large glass manufacturers, have been certified by 3C, and in the product on the note. Some small businesses, there may be no such certification, or did not realize that there is no 3C logo. Emphasis is that 3C is mandatory.
- Q: What is the difference between screen printing glass and glazed glass? The What is the difference between product performance, production methods, what is the difference
- Screen printing is a printing method, and the use of a lot of printing, printed on the glass up to the color glaze and frosted plaster. It should be said: color glaze glass is a kind of silk screen glass.
- Q: Curtain wall classification of building curtain wall
- (Double beam curtain) component of the wall of the pillars (or beams) first installed in the main structure of the building, and then install the beams (the main structure of the structure, Or columns), columns and beams to form the grid, the panel material in the factory processing into the unit components, and then fixed in the column and beam composed of the grid. The load on the panel material unit component is transmitted to the main structure through the column (or beam). Component-type curtain wall is divided into: the frame of the curtain wall: metal frame components exposed to the outer surface of the panel frame support curtain wall. Hidden frame curtain wall: metal frame components are not exposed to the outer surface of the panel frame support curtain wall. Semi-concealed curtain wall: The vertical or horizontal members of the metal frame are exposed to the curtain wall of the outer surface of the panel.
Send your message to us
ACM / Alucobond / Composite Panel for buliding caldding
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 700 PCS
- Supply Capability:
- 120000 PCS/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords