32238 Tapered Roller Bearigs Single Row Bearing
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 500000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specificatioin of Taperder Roller Bearings:
The tapered roller bearing is to bear the combination of radial and axial load but mainly afford radial load. The loading capibility is determined by the raceway angle of outer ring, the larger angle afford larger load. This kind of bearings can be seperated and it can be divided into single-row and double-row tapered roller bearings by the number of columns. The clearance for single-row tapered roller bearing should be adjusted by the customers when installation. For the double-row tapered roller bearings,the clearance has already set by the manufacture before ex-factory. Tapered roller bearing has taper shaped inner ring and outer ring raceway,and the roller elements arrange between them. All projection lines from the surface of rollers meet at the same point on bearing axis. This design makes tapered roller bearings particular suitable for combined (axial and radial) loads.The axial loading capacity is determined by the contacting angle α, the bigger angle for α, the larger axial loading capacity is. Tapered roller bearing is usually a seperated bearing, that is,the inner ring assembly including roller and cages, is seperated installed with the cup.
Taper roller bearings are mainly used for radial and axial joint load with radial load as main subject. Axial load capacity relies on raceway angle of outer ring: the bigger the angle is, the bigger the bearing capacity is. Outer ring can be separated and can be easily assembled. During installing and using process, axial clearance and radial clearance and radial clearance can be adjusted and pre-interference installation can be allowed.
Product application:
In many applications tapered roller bearings are used in back-to-back pairs so that axial forces can be supported equally in either direction.
- car and vehicle wheel
- mining equipment
- moderate speed
- engine motors
- axle systems
- construction
- agriculture
- reducers
- gear box
- Q:Taper roller bearings are used on my motor. Serious damage occurred during use. Please help me analyze the possible causes of damage! Thank you
- This approach is somewhat similar to a tolerance control method invented by Timken (Timken) in 80s, and is suitable for mass production. But in this way, you have to control all the variables, or you'll probably have a problem with your bearings.
- Q:that is to say, the taper head is the face and the back is the back
- When you remove the outer ring of the tapered roller bearing, you will see that the components of the inner ring cage are large and smallLook at the axial force you are using. The direction of the axial force in that direction is consistent with the direction of the small one,
- Q:How does the roller of tapered roller bearings fit in?
- Tapered roller bearings itself can be broken down, and new (or old) bearings are cleaned and decomposed. So do not worry, carefully installed in accordance with the original installation order on the line, and if it does not meet the installation order, the installation of this bearing is not go on.
- Q:Tapered roller bearings, 70 in diameter, please tell me the model number
- What about outside diameter (D) and width (B)? You didn't say?.Following are all series of codes and sizes for tapered roller bearings (single column and double row). I hope they can help.Single row tapered roller bearings (taken from GB/T 297-1994)Bearing code |30000: 32914 X2Basic size /mm|d: 70Basic dimensions /mm| D: 100Basic size /mm|T: 20Basic size /mm|B: 19Basic size /mm|C: 16Installation size /mm|da (min):-Installation size /mm|db (max):-Installation dimension /mm| Da (min):-Installation size /mm|Da (max):-Installation size /mm|Db (min):-Installation size /mm|a1 (min): 4Installation size /mm|a2 (min): 6Installation size /mm|ra (max): 1Installation size /mm|rb (max): 1The other is /mm|a size: 19Other sizes /mm|r (min): 1Other sizes /mm|r1 (min): 1The calculated coefficient is |e: 0.33The calculated coefficient is |Y: 1.8The calculated coefficient is |Y0: 1Basic rated load /kN|Cr: 53.2Basic rated load /kN|C0r: 85.5The speed limit / (r/min) | fat: 3600The speed limit / (r/min) | oil: 4500The weight is /kg|W:-
- Q:Online cylinder cones are GB/T4663, what do you mean?
- National standard GB 4663-1984, roller bearings, thrust cylindrical roller bearings, size, please check the mechanical design manual (Fifth Edition), second volumes --- commonly used rolling bearings, dimensions and performance parameters / thrust roller bearings.
- Q:Tapered roller bearing: Bearing expert why burned or locked
- 1, improper choice of bearing clearance.For example: C3 group should be selected for clearance, and the actual use of ordinary group clearance. Because when the bearings work will continue to accumulate heat, shaft diameter and inner ring and outer ring rolling body will swell, because good radiating condition of expansion is relatively small, the whole bearing clearance becomes small, or even negative clearance larger.At this time, stress increases between the body and the rolling roller pressure, lubrication conditions decreased, there will be the phenomenon of boundary lubrication or even local steel on steel friction, so the temperature continues to rise, the base oil in lubricating grease evaporation, so lead to vicious spiral bearing overheating burned, rolling annealing into blue black color, then bearing the friction increasing roller holder to stop COLLOPSE bearing lock.
- Q:What is the size of tapered roller bearings 352214?
- Bearing type: tapered roller bearingNew model: 352214Old model: 97514EInternal diameter (mm):70Outside diameter (mm):125Width (mm):75
- Q:Tapered roller bearing suffix code YA2 stands for what does that mean?
- I often see that bring happiness to people's lives in music is painful, hard after the success of scientists occasionally see a mirror inside the grey haired, new Chinese often over the slightest grief, I often heard people said in an interview, while working hard, but I'm happy indeed! They bear varying kuzhongzuole, showing their amazing persistence and noble quality to enjoy life without, but it is not difficult to see their happiness included "self denial".
- Q:Why is the cage of tapered roller bearings loose?
- You can come up with the relevant standards, must belong to the bearing standard parts, as long as you meet the standard requirements of the bearing can be spread!
- Q:What items should be inspected for tapered bearings?
- 2, tapered roller bearings are not allowed to have an electric drill pattern, vibration patterns, yin and Yang face and polished traces, did not promise to emerge supporting construction and obvious measurement traces, did not agree to knock bumps and obvious color difference.3, the name of the whole machine did not promise to have oxide skin.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
32238 Tapered Roller Bearigs Single Row Bearing
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 500000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords