Hyundai Solar Panels 400w - 245w-315w Poly Solar Panel with CE, TUV, UL, ETL, MCS Certificates
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 watt
- Supply Capability:
- 1000000 watt/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Packaging & Delivery
Packaging Details: 25PCS/Pallet, carton box with wooden pallet or wooden box with pallet
Delivery Detail: 7-15 days according to the order quantity
Product Description
A Grade 305w high efficiency Poly PV Solar panels
Max Power Voltage Vmp(V) | 31.5 |
Max Power Current Lamp(A) | 7.94 |
Open Circuit Voltage Voc(V) | 37.5 |
Short Circuit Current Isc(A) | 8.72 |
Temperature Coefficients of Isc (%/℃) | 0.0825 |
Temperature Coefficients of Voc (%/℃) | -0.4049 |
Temperature Coefficients of Pmp (%/℃) | -0.4346 |
Max Power(w) | 305 |
Limited Product Warranty
Under normal application, installation, use and service conditions, if MODULES fail to conform to this limited product warranty due to defects in material or workmanship, then for a period ending 12 years from date of sale as shown in the invoice or Contract issued by CNBM SOLAR. CNBM SOLAR will, at its option, either repair or replace or refund the purchase price as paid by the client for these defective MODULES. The repair or replacement or refund remedy shall be the sole and exclusive remedy provided under the “Limited Product Warranty” and shall not extend beyond the 12 years period set forth herein. It will be performed directly to the direct client only. This “Limited Product Warranty” does not warrant a specific power output, which shall be exclusively covered under “Limited Peak"
Company Profile
China National Building Material (CNBM) Group Corporation
CNBM Solar photovoltaic (PV) Panel is designed for large electrical power requirements. It is the optimal choice for both on-grid and off-grid power systems. CNBM Solar panel offers high performance of power per square foot of solar array. Monocrystalline silicon(c-Si): often made using the Czochralski process. Single-crystal wafer cells tend to be expensive, and because they are cut from cylindrical ingots, do not completely cover a square solar cell module without a substantial waste of refined silicon. Hence most c-Si panels have uncovered gaps at the four corners of the cells.
CNBM International Corporation is a professional solar panel manufacturer in China for CNBM brand . Silicon panel ( silicon module), as our main product, has high quality and good service. Our products are very popular in Europe, Australia, England, Middle East, Mexico, Argentina, Chili, Singapore and Africa.
Furthermore, our products have gained international authorized certificates like TUV, UL and CE.
China National Building Material (Group) Corporation (CNBM), established in 1984, is one of the largest State-owned group corporations of building & mechanical materials which specializes in the design, manufacturing and distribution of building materials in the world.
As the whole world turns “green”, CNBM enters into the Photovoltaic Industry in 2005.After 6 years' fast growth, now our annual capacity is 500MW solar panel and 500MW solar cell.
FAQ
We have organized several common questions for our clients，may help you sincerely：
1.what price for each watt?
it depends on the quantity, delivery date and payment terms,
2.what is your size for each module? can you tell me the parameter of your module?
we have different series of panels in different output, both c-si and a-si. please take the specification sheet for your reference.
3.Can you provide the peripheral products of the solar panels, such as the battery, controller, and inverter? If so, can you tell me how do they match each other?
Yes, we can, we have two companies for solar region, one is CNBM International, the other is CNBM engineering Co.
We can provide you not only the solar module but also Solar Cells, the off grid solar system, we can also provide you service with on grid plant.
4What is your warranty system?
Our product performance guarantees for 25 years
• 12 years guarantee for workmanship
• Timeliness of delivery
• Quality Products certified (TÜV, UL, CE, ISO)
5.How do you pack your products?
We have rich experience on how to pack the panels to make sure the safety on shipment when it arrives at the destination.
6. Can you do OEM for us?
Yes, we can.
7.How long can we receive the product after purchase?
In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The pecific time of receiving is related to the state and position of customers. Commonly 7 to 10 working days can be served.
- Q: Can solar panels be used to power air conditioning units?
- Yes, solar panels can be used to power air conditioning units. Solar panels generate electricity from sunlight, which can be used to power various appliances, including air conditioning units. This is an eco-friendly and cost-effective way to cool buildings and reduce reliance on traditional energy sources.
- Q: the solar panel works with LEDs, small bulbs,etc but neve with any dcmotor. Please help. I have a science exhibition.
- It may be that the power output of your solar panel is not enough to drive the DC motor. It is producing up to 6 volts but it may not be producing many milliamps. LEDs need very little power to work but DC motors often need quite a high current to get them turning. If you can run several solar panels in parallel, you can probably increase the available current. Alternatively, can you expose the existing panel to much more light so as to get it to work at its maximum output? That might work. Good luck with your science exhibition.
- Q: Can solar panels be used for charging electric bikes?
- Yes, solar panels can be used to charge electric bikes. By converting sunlight into electricity, solar panels can provide renewable energy to charge the batteries of electric bikes, making them a sustainable and eco-friendly option for transportation.
- Q: Can solar panels be installed on a parking lot or carport?
- Yes, solar panels can be installed on a parking lot or carport. In fact, these locations are ideal for solar panel installations as they provide ample space and can generate clean energy while also providing shade and protection for vehicles. This dual-purpose approach helps maximize the benefits of solar energy and optimizes land usage.
- Q: I have a solar panel 7.5V .25W 50mah, connect 2 in parallel to power a RC boat. The boat use to run on 6cell battery pack - 7.2V 800Mah.The dc motor requirement based on the provided battery pack, i assume would be 7.2V and rated at (7.2V * .8Amp) = 2.96 Watt.Would two of my solar panels run this DC motor ?are my calculations or understanding correct ?do lend a hand dear ''world''
- solar cells are not rated in mah, they are rated in ma or amps. I'll assume this one is 50mA. Two in parallel will give you 300mA, so that will charge a 800mA-hr battery in 800/300 = 3 hours. Theoretically, in bright sunlight if the array is exactly at right angles to the sun's rays. The problem is, depending on the type of cells, the battery pack will need 8 volts or so to charge, and your solar cells won't deliver that. If the sun is at an angle, you may get only 3-5 volts. so you have to put them in series, so you will get only 50mA out of them, which will charge the battery in 6 hours of bright sunlight. Would two of my solar panels run this DC motor ? If the motor is .8 amps, you need the battery, the arrays are not near enough. Or are you attempting to replace the battery pack with the solar array? Your english makes that difficult to understand. If so, put them in parallel to get the 300mA, but that would run the .8 amp motor very slowly. If you had 2 of the solar panels, it might run at close to full speed if the sun is bright and shining directly on all the panels. But where did you get the .8 amps for the motor? The 800Mah rating of the battery has ZERO to do with the motor current. So the answer above is based on your number, which I suspect is totally wrong. .
- Q: am having a 75 watts siemens solar panel and is giving me 2.89volts during bright light, i wanted to know can this be used to charge 00Am/hr battery?
- Many of the panels used on homes are designed to produce 2 volts DC. 0 of them wired in a series would produce 20 volts DC. An inverter is used to change the DC voltage to AC. The other aspect of electricity is amperage. With electrical units wired in series the voltage is added. When they are wired in parallel the amperage is added. The Volts x Amps produced will give you the wattage. A wise homeowner will examine their electric bills or the equipment used to determine their demand. They will consult tables that let them know how much sunlight their area receives each year as this will alter the rated performance of the panels. Then they will try and determine how much of the demand they want to fill. 80% may be economical. Then they also want to determine what they will do with excess electricity that may be produced during the summer months of intense sun and how they will supply the shortfall of low sun winter months. From all this they will determine the number of solar panels they need to purchase.
- Q: I need a list of worldwide solar panel manufactures from china, US, Spain, Germany, Japan etc...Can any one direct ne to such place?I rather it will also contain comparison of parameters like efficiacy, quality etc and to be divedied by country of manufacturing.Thank you
- You can't buy at that level unless you are connected to governement. A lot of production is already spoken for for years to come. Where you live determines what you can legally buy and install. The EU has it's own certification, the US has 2 sets, the Canadians have their own. Your answer also requires knowing the use for the solar panels, whether it is grid-tie, off-grid or standalone to power an appliance. And you have to choose mono crystalline, poly crystalline, or thin-film.
- Q: How do solar panels affect the overall sustainability of a building?
- Solar panels positively affect the overall sustainability of a building by reducing reliance on non-renewable energy sources and decreasing carbon emissions. They generate clean and renewable energy from the sun, reducing the building's environmental footprint and contributing to a greener future. Additionally, solar panels can lower energy costs, increase energy efficiency, and provide energy independence, making the building more resilient and sustainable in the long run.
- Q: Im doing a science project and I need to know what gases or liquids a solar panel can make that is not friendly to the environment. Please name all the gases and liquids and explain how they damage the environment. It would be most likely that you will get best answer if you find all the bad things about solar energy and explain why they are bad and how they affect nature. that would be helpful to. Thank you
- Once okorder /
- Q: Can anyone give me a simple but informative explanation on how solar panels produce electricity/power? Thank you!
- The sun produces energy. When that sunlight hits most surfaces, it causes that surface to heat up. When the sunlight hits some other surfaces, instead of heat, the result reaction is electricity charges. Some of those surfaces are certain types of silicon, which is what solar panels are made of. The electricity produced is DC electricity. It is then funneled to charge a battery, where it can be stored. If need be, it is passed through a inverter, which changes it to the AC power that we use for our appliances.
Send your message to us
Hyundai Solar Panels 400w - 245w-315w Poly Solar Panel with CE, TUV, UL, ETL, MCS Certificates
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 watt
- Supply Capability:
- 1000000 watt/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
