Ceramic Fiber Blanket 1425 NATI Insulation
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 100 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Quick Details
Grade: | HZ (High Zirconium) | Application: | Liners Of Industrial Furnace | Thickness: | 25/50 mm |
Width: | 610/600 mm | Length: | 7200/3600 mm | Chemical Composition: | 35% Al2O3+46.7% SiO2+16% ZrO2 |
Working Temperature: | 1300 | Fiber Diameter: | 2.6 | Thermal Conductivity: | 0.23 |
Density (kg/m³ ): | 128 | Model Number: | 1425 | Brand Name: | |
Place of Origin: | Color: | white |
Packaging & Delivery
Packaging Detail: | carton/woven bag |
Delivery Detail: | 15 days after receipt of pre-payment |
Specifications
NATI Ceramic Fiber Blanket is made from long special ceramic fiber, formed by special strong double surface needling
Introduction
NATI Ceramic Fiber Blanket is made from long special ceramic fiber, formed by special strong double surface needling, without any binder ,increasing inter-weaving and tensile strength, so that NATI ceramic fiber blanket own good stability under any working temperature.
Characteristics
*Good springiness for fiber
*Excellent strength and resistance to blowing
*Excellent chemical stability, resistance to erosion
*Low thermal conductivity
*Low thermal shrinkage
*Excellent sound absorption
Typical Applications
*Filling insulation and joint sealing
*Back-up lining for industrial furnaces
*Fireproof materials for construction
*High temperature materials for filtration *
Raw materials for further producing, such as modules
Physical & Chemical Data
Description | 1000 NATI Ceramic Fiber Blanket | 1260 NATI Ceramic Fiber Blanket | 1425 NATI Ceramic Fiber Blanket | 1500 NATI Ceramic Fiber Blanket | 1600 NATI Ceramic Fiber Blanket |
Classification temperature( ℃) | 1000 | 1260 | 1425 | 1500 | 1600 |
Melting point( ℃) | 1760 | 1760 | 1800 | 1900 | 2000 |
Color | White | White | White | Green-blue | White |
Average fiber diameter (um) | 2.6 | 2.6 | 2.8 | 2.65 | 3.1 |
Fiber length (mm) | ~250 | ~250 | ~250 | ~150 | ~400 |
Density for fiber (Kg/ m3) | 2600 | 2600 | 2800 | 2650 | 3100 |
Shot content ( > 212um) (%) | 12 | 12 | 12 | ||
Thermal conductivity rate Kcal/mh℃ (W/mK) ,ASTM C201 | |||||
Average 400℃ | 0.08 | 0.08 | 0.08 | ||
Average 600℃ | 0.19 | 0.12 | 0.12 | ||
Average 800℃ | 0.19 | 0.16 | 0.16 | ||
Average 1000℃ | 0.23 | ||||
Chemical composition : | |||||
Al2O3 | 43 | 45 | 35 | 40 | 72 |
SiO2 | 55 | 52 | 46.7 | 58.1 | 28 |
ZrO2 | 15-17 | ||||
Cr2O3 | 1.8 |
Standard Dimension
Density: 96,128,160Kg/m3
Dimension:14400×610×13 mm 7200×610×25 mm 3600×610×50 mm
- Q: I have recently begun making glass beadsIn about an hour I'll be picking up most of the supplies needed.Here is a list of the supplies I'll be shopping for todayIf anyone can recommend or advise against buying certain types or brands, that would be greatI'll appreciate any advice.-Torch (1400 F)-Fuel (must be mixed with oxygen): propane, natural gas, (or MAPP gas, it does not need to be mixed with oxygen)-Striker (for the torch)-mandrels (I believe these are the glass rods-Beadrake, marver plates (what is the difference?)-Clamp for torch-Bead release (what kind of paint is this?!)-Fiber blanket (for cooling the beads down inWhat is this made of?)-Small work table-Large, square, metal plate for the table-Pliers (for making stringers)
- Microwaveable Hot Plate
- Q: 1st formula take 2 smiling photos one of you and one of the one you love and face them towards each other and to tie these pictures 99 times with red ribbon/yarn/thread then take 2 chop sticks and tie these two together also with 9 inches of red ribbon/yarn/threadThen I take the photos and place them in the right back corner of my room(not sure which way the southwest corner of my room is) and then throw the chopsticks on top of the photos not to touch these items for 27 days, after 27 days I put the chopsticks away and take the photos and throw them into a moving body of water for me it would be my local beach that's theonly moving body of water I have.2nd formula take the two photos with love labeled on the back tie them up in red ribbon/yarn/thread 99 times and then place these photos in a red envelope sleep on enevelope for 9 nights during the full moon on 10th day take these photos and throw them in a moving body of water i.estream, rivers, beach etchelp!
- i am an outspoken supporter of responsible, private drug use.your body is your body and no form of authority should be able to tell you what you can and can't put into it if you are responsible about usingbut, i would have done the same thingthere is a time and a place for it, and the classroom isn't itbesides, dipshts like that give responsible users a bad nameyour role is donethe cops got the dope so there's no point in going to trial, he'll plead guilty and do probationa snitch is someone that's involved in the game who squeals when he gets pinched.in fact, homeboy is probably gonna end up becoming the snitch when its all said and done.
- Q: Right now it is chilly, windy and raining outsideThe outside temp is 37 but it feels like 29I have a 2 story house and a crawlspace that runs the entire layout of the houseIt's always cold on the kitchen and hallway floor on the 1st floorAnd the 2nd floor of my house is an iceboxThe attic is well insulated, the windows are drafty (aluminum) but I am replacing the 2nd floor windows by the end of the monthI set the thermastat on my furnace (which is on the first floor) to 79 and within 30 minutes off the heat being off the temp dipped down to 74Could the insulation on the sides of the house by poor and making the whole house cold all the time?
- Did he hand pick his Mosin or did he get the random pick that most people get with the worn muzzle and dark, frosty bore? If your gunsmith friend is that good with Mosin Nagant iron sites, he might be in the wrong jobFinally, Vassily Zaistyev had one that was preselected for accuracy to be used for snipersHe also had a scope attached The cost to have a MN setup like Vassily, would be more than the cost of buying a brand new, more accurate, more reliable, easier to handle, modern rifle and optics.
- Q: When installing 2 gable vents, is it better to have one side draw outside air in and the other side push the inside air out creating a cross flow through the attic, or better just to have both power vents pushing air out?
- Definitely add salt to their grain to make sure they drink enough water, to avoid impaction colic2T 2x per day will workNon iodine salt.
- Q: I have short hair because it was so damaged tht I had 2 get it u and it is just growing back now and I use motions permI go to the hair salon occasionally but I would like products tha I cn use at home to make my hair look great.Things like tools(flat irons, curlers, etc.) and greases or lotions shampoos and stuffI would appreciate all the helpThank you!
- punch holes and thread through rope
- Q: I don't know if gauge is the right word here, but basically I am knitting a sampler afghan and am using the same size needles and the same yarn, but making 12 in squares in different patternsI'm just wondering if instead of measuring out the 12 inches I could just do like 60 rows or somethingWhen I measure the squares, it's kind of hard to measure right I think, because there's so much give in the yarnSo basically, are 60 rows knit in different patterns the same length?
- 1Does toast count? 2Artist, I think 3Amazing poker skills 4Milkshake 5Carrot 6Perfume: Story of a Murderer 7Pisces 8Ears pierced 9Swear like a Sailor 10If I had a car, I might 11Baseball 12Negative 13Ask you why the hell we're stuck 14I'm not sure 15I have a cyst? 16Yes 17Ask you what you were selling 18You ask a lot of questions 19Scary 20Taller 21Crime :) 22Blue/grey 23Not yet 24Bottle 25Pay bills 26Sorry, I'm asexual 27The pizza parlour 28No 29Read, Y!A, something not productive 30Yes 31Bad driving 32Apathetic 33Not really 34Dig a tunnel from your house to my house 35No
- Q: As in local stores not websites.
- It won't work with out some sort of oil or butter on them they will only dry out and burnThe way I usually do fresh hashbrowns is to bake the potato the night before or earlier that day and let coolThen grate them and brown in very small amount of oil or sprayI usually have baked potatoes for supper and just bake a few extra for the next dayAlso if you salt them right away the salt will draw the liquid out of any fresh veggie of any kind and they will produce a lot of liquid, so they will steam/boil in the oven, I just don't think it will workAnd if you do fry them, always add salt after they begin brown so they won't turn into potato soup with all that liquid.
- Q: i have seen jeans that are sooo expensive, and others that cheaperAre there really any diferences? please, educate me in this topic
- This is the first resignation in Obama's administration that I totally support! It is obvious from all the testimony that the woman at the helm was totally incompetentThe guards wouldn't release the dogs in case they attacked the agents?! Then why do the police do it all the time? Turn off the door alarm because it's annoying people?! Allow unvetted security guards to work the White House, carrying weapons?! The whole thing is ridiculous!
- Q: What is a zephyr?
- zeph·yr ( P ) Pronunciation Key (zfr) nThe west windA gentle breezeAny of various soft light fabrics, yarns, or garmentsSomething that is airy, insubstantial, or passing.
- Q: What is crochet?
- You want to use Aluminum wire as the negative and stainless steel as positive, check out PROTOTYPE9000 Channel on Youtube, as was amazed at this production
Send your message to us
Ceramic Fiber Blanket 1425 NATI Insulation
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 100 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords