Woodworking Band Saw Machine with Effectively in Processing Wood
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Woodworking Band Saw Machine Effectively in Processing Wood
Main Structure Of The Machine:
This machine from the body, working platforms, the upper and lower saw wheel body, the upper and lower saw card device such as security cover and transmission parts.
Use of the machine:
This machine is mainly used for wood vertical saws, horizontal saw all kinds of Square-edged Timber and plates, also applies to non-metal-like plastic, nylon sawing.It is suitable for all kinds of wood processing plants, such as furniture factories, board box factory, wood thread factory, wood-mode manufacturing and construction technology, etc.
Main Specification And Technology Parameter:(Normal Type)
Model | MJ345/MJ346 | MJ316A/MJ316D | MJ318/MJ319 |
Saw wheel Dia. | 500mm/600mm | 610mm/620mm | 800mm/900mm |
Width of sawing woof | 450mm | 400mm/350mm | 350/400mm |
Height of sawing wood | 150mm | 300mm/350mm | 400/600mm |
Cutting speed of saw band | 20m/sec | 21.3m/sec 27m/sec | 30.14m/sec 34m/sec |
Rotary speed of saw wheel | 780r/min | 680r/min 830r/min | 720r/min |
Adjustable angle of worktable(LXW) | 0-45degree | ||
Max size of worktable( | 540X570mm | 780X700mm/840X750mm | 800X750mm/830X780mm |
Motor power/Voltage frequency | 2.2kw(3HP) / 380V 50Hz | 4kw/7.5kw(5.5/10HP) / 380V 50Hz | 11kw(15HP) / 380V 50Hz |
Weight of machine | 300kg/850kg | 850kg | 980kg/1100kg |
Overall dimensions | 860X700X1900mm | 1600X1200X2050mm | 1700X1350X2350mm/ 1750X1400X2750mm |
Main Specification And Technology Parameter:(With sliding table type)
Model | MJ316DT | MJ318T | MJ319T |
Size of sliding table(LXW) | 2800X377mm | 3200X367mm | 3200X367mm |
Saw wheel Dia. | 620mm | 800mm | 900mm |
Max processing length | 2600mm | 3000mm | 3000mm |
Width of sawing woof | 350mm | 400mm | 400mm |
Height of sawing wood | 350mm | 600mm | 600mm |
Cutting speed of saw band | 27m/sec | 34m/sec | 34m/sec |
Rotary speed of saw wheel | 830r/min | 720r/min | 720r/min |
Max size of fixed worktable | 830X350mm | 790X380mm | 790X380mm |
Motor power/Voltage frequency | 7.5kw(10HP) / 380V 50Hz | 11kw(10HP) / 380V 50Hz | 11kw(10HP) / 380V 50Hz |
Weight of machine | 1150kg | 1300kg | 1400kg |
Overall dimensions | 2870X1850X2750mm | 2870X1850X2750mm | 2870X1850X2750mm |
Model: MJ345/MJ346 worktable may tilt 0-45 degree.
- Q:No cutting fault of edge sealing machine
- Check your sensors! I've met too
- Q:What is the cabinet edge?
- Seal is to put the cabinet plate with material packaging, and a variety of corners and corners with a variety of materials packaging, good-looking, more smooth, so that the cabinet looks more beautiful and durable
- Q:The more detailed the better, as long as the edge and veneer veneer detailed steps, other steps do not use.
- The answer to the 80home fashion furniture is very standardPlate sanding refers to the customer will need to add the wood edge or due to stitching caused by surface roughness of substrate enough through the wide breadth sanding machine for sanding processing, mainly in order to achieve the purpose of smooth surface for hot pressing plate is not uniform throughout the compression of thick sand is light foaming. An attached sander function, sometimes plate thickness does not meet the regular customer needs, only by sanding again and again to reduce the thickness of the thickness of demand until close to the customer so far. Because the accurate thickness of sanding machine can be accurate to about 10S, so with the caliper can reach the thickness of purpose.A process is in fact in the preparation of the veneer veneer veneer cutting industry. Because of the impact of natural conditions, the conventional width veneer are generally restricted in a dozen centimeters (some more narrow, of course there are some more wide), so must pass before veneer and veneer edge stitching, there will be a lot of white edge (also is the color difference and the middle) if you do not cut off together will be very ugly, in order to make the stitching seam is not too obvious to do so to seal, then as long as two edges to splice line can be better. There are special cutting veneer veneer cutting general machine, cutting machine blade length of two or three meters, basically can satisfy the needs of
- Q:Why does my kitchen cabinet door edge strip fall off, and the base board is particle board?
- What material did you choose when you made the plate? If it doesn't fit the material you bought at the moment, you can find a business.
- Q:What kind of material does furniture plate edge banding use, that is beautiful and beautiful?
- The methods used in modern panel furniture are edge banding, special edge sealing (soft molding, edge banding) and post molding edge banding. One of the most commonly used is linear edge banding.Used as a sealing material: as long as the substrate strip or ribbon, can be pasted on the surface, can be trimmed or milling processing with woodworking tools can be used. Such as wood, paper, plastic, fiber, and some composite materials. There are commonly used wood, veneer, veneer with back lining paper tape, impregnated with continuous edge roll belt and PVC tape etc..1, ordinary PVC wood grain banding strip: at present, domestic furniture edge banding generally use PVC grain edge banding, but its quality is very unstable, after trimming the color difference is obvious, but also easy to aging and fracture.2, ABS edge banding: new edge banding material, has been adopted by a small number of high-end brands, its advantages are:(1) raw materials are exquisite, high purity, environmental protection and pollution-free;(2) using single extrusion and four-color printing process, the texture is clear, natural color, different from the homemade transfer membrane process;(3) the surface has anti-wear layer, good wear resistance, not easy to fade, not easy to corrosion;(4) raw materials contain additives, the color is stable, ultraviolet light will not change color, and after trimming the cross section color will not have obvious color difference;(5) good flexibility, even if the seal is small in the radius of the plate, it will not break wood phenomenon;(6) good dimensional stability, not excessive shrinkage or expansion due to temperature difference;(7) after sealing, the seam is the smallest;(8) the edge banding strip will shine when it is used for a period of time, but will not stick to dust and will not blacken.
- Q:Which kind of portable edge banding machine is easy to use?
- 90 good, fixed speed. I bought it from the city machinery, and the quality is not bad
- Q:Custom made wardrobe in all friends custom made a wardrobe, a little worried about this edge, how to assess the effect of sheet metal banding?
- See if the edges are smooth and smooth, whether the seams are tight, whether the edges are clear and whether the edges and corners are exquisite. All friends in this piece of doing very delicate, do not worry too much.
- Q:Types of edge banding
- Acrylic edge strip is made of acrylic extrusion molding. PMMA, commonly known as organic glass, also known as acrylic (Acrylic), from this name, you may not know what kind of material it is, and no way of knowing what elements it is made of. The polymer chemical name of transparent material called polymethyl methacrylate, acrylic plate often said is poly methyl methacrylate (PMMA) plate, which is composed of methyl methacrylate monomer (MMA) polymerization. High transparency. Organic glass is the best polymer transparent material at present. The transmittance is 92%, which is higher than that of glass. The lamp is called the artificial sun solar quartz is done, this is because the quartz can be completely through ultraviolet. Ordinary glass can only penetrate 0.6% of ultraviolet light, but organic glass can pass through 73%. Shanghai plastic sealing edge adopts imported production equipment and raw materials, good toughness, products edge and face color, with anti oxidation and anti ultraviolet effect, and high temperature, cold resistance. Mainly suitable for high-grade furniture, cabinets, doors, shelves, bedroom suites, office furniture, according to the product specification or customer requirements to provide a variety of sizes, thickness can range from 0.5mm to 8mm, width from 9mm to 180mm, priority technology, edge expert.
- Q:Wood composite wooden door, both sides of the paint sealing it?
- Intermediate solid wood composite door has filled material, is with the glue + press pressure, very strong, the doors on both ends of each of the two holes, at the same time, most manufacturers will do two spray treatment on wooden doors.Should be sealed, formaldehyde is not in the wood. It's in the gum and in the paint.. At present, the world in addition to formaldehyde the most effective, the most cost-effective way is to open windows ventilation. Should not be sealed, solid wood will not release toluene, only paint will not edge, but it will be ugly.Solid wood composite doors should be painted at both sides of the edge, moisture-proof role. The room pay attention to ventilation, generally does not affect people's health. No edge, but regular manufacturers will spray primer in the process of spraying both sides of the wooden door primer to prevent moisture. Said air vents are probably no production of on-the-spot investigation on the door, the hole is wooden doors in the baking process with a small iron bar is fixed on the paint frame, not what vent.
- Q:Melamine density board how hand affixed edge strip?
- It's OK to use ordinary glue. It's nothing special. Decorative E station through the website of building materials shopping channel, there are many information about the plate, you can go and see.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Woodworking Band Saw Machine with Effectively in Processing Wood
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords