Q:I have a 1993 Oldsmobile Cutlass Supreme and I think I have the case of the blow-by. The engine had high mileage, but was rebuilt b/c it stalled while driving. 3.1L V6 gasoline engine. The fuel filter and the fuel pump are brand new. Now we have the same problem a few months later. It stalls while driving. Its been sitting a while and won't start by itself, so I pulled off the air intake hose off of the air filter to spray starting fluid into it. I noticed oil puddled in the air intake hose, so I looked for the PCV valve on the rocker cover. There is a tube going from the air-intake hose to the rocker cover. I popped out the tube from the rocker cover and there is no PCV valve. Just tube. Is that where the PCV valve is supposed to go? If not, where can I find it on the engine? And could that possibly fix the blow-by and the stalling engine? I'd appreciate any help. Thanks in advance.

top of the manifold

Q:Not the cold and hot water shut off valves. The one with a tiny handle and it looks like a T. what does it do? should I mess with it?

Sounds okorder /

Q:What kinds of butterfly valves are available? What is the working principle of butterfly valves?

At work temperature:(1) high temperature. T>450 degrees C butterfly valve.(2) medium temperature butterfly valve. 120 C<t<450 DEG butterfly valve.(3) normal temperature butterfly valve. A 40C<t<120 degree C butterfly valve.(4) low temperature butterfly valve. One 100<t< one, 40 degrees C butterfly valve.(5) ultra low temperature butterfly valve. T< one 100 degrees C butterfly valve. Www bgfm /df/Divided by connection:1 pairs of clip butterfly valveThe butterfly plate of the clip butterfly valve is installed in the direction of the diameter of the pipe. The valve is fully open.The clip butterfly valve is simple in structure, small in size and light in weight. Butterfly valve has an elastic seal and metal seal two types of seals. Resilient sealing valve. The sealing ring can be mounted on the valve body or attached to the periphery of the disc.2, flange butterfly valveThe flange butterfly valve is a vertical plate structure, and the stem is a sealing ring of an integral metal hard sealing valveFor flexible graphite plate and stainless steel plate composite structure, mounted on the valve body, butterfly plate sealing surface of stainless steel surfacing. The sealing ring of the soft sealing valve is made of nitrile rubber and is mounted on the butterfly plate.3, lug butterfly valve4 、 welded butterfly valveWelding type butterfly valve is a non sealed butterfly valve, widely used in medium temperature less than building materials, metallurgy and mining, electric power production process at 300 nominal pressure 0.1Mpa pipe, used to open and close connected, or adjust the medium quality.

Q:What is the national standard for clip butterfly valves?

GB/T 12238-2008 "flange and clip connection elastic seal butterfly valve"GB/T 26144-2010 flanged and clip on steel lined fluoroplastic butterfly valvesJB/T 8527-1997 "metal sealed butterfly valve"

Q:What is the meaning of the D341*5-10 / 16ZB1 turbine butterfly valve flange said?

D: for clamp, 3: turbine head 4: flange connection 1: vertical plate X5: Ding fine rubber 10/16: nominal pressure Z: gray cast iron valve body, B1: valve plate material is ductile iron

Q:Butterfly valve common faults and treatment methods?

Three, summary:Only familiar with every detail of circulating water pump outlet valve and butterfly valve equipment, timely and thorough maintenance and strict debugging, to ensure the safety and reliability of equipment operation, to ensure the healthy and orderly operation of equipment.

Q:Which is expensive, butterfly valve?

Butterfly valve is more common, less material and simple structure. Butterfly valve cheaper

Q:How do you explain A in butterfly valve D37A1?

Represents a seal or lining material symbol.Said sealing ring or lining material with the Chinese phonetic alphabet: B Babbitts D nitrided steel, acid resistant stainless steel H, J L Aluminum Alloy, hard rubber, nylon NL, P leather, SA PTFE, SC PVC, SD bakelite, T copper, TC enamel, X rubber, Y hard alloy

Q:How do hydraulic butterfly valves work?

The valve hydraulic device is mounted on the valve drive shaft. The driving shaft of the valve is fixed with a transmission spline, and the crank (with an outer spline) is sleeved on the driving shaft. When the hydraulic system works normally, through the gear sleeve, the transmission spline is connected with the crank. Thus, the hydraulic cylinder drives the crank, and the spline on the crank passes the torque to the transmission spline by means of a gear sleeve. Because the driving spline is fixed on the driving shaft, the driving shaft rotates and drives the valve plate to start and close. Sorry, the picture doesn't come up

Q:Butterfly D371X5-16ZB1 what does each letter stand for?

Daily valve pressThe regular model is out of step with you. I can only explain the regularD371X5-16ZB1D is butterfly valve3 is the turbine drive7 is the clamp connection1 is the display opening signX is a rubber seal16 is 16 kg pressureI don't know the other superfluous letters