Wire Braided Hydraulic Hose High PressureDN23
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 80000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Wire Braided Hydraulic Hose
Construction: this hose shall consist of an inner tube of oil resistant synthetic rubber, a single steel wire braid reinforcement, and an oil and weather resistant synthetic rubber cover.
Applications: this section covers hose for use with petroleum
Temperature range: -40℃ to 100℃
1.Simple and compact construction. Small in size and light in weight. Easy transportation, installation and maintenance.
2. Quick 90 degrees on-off operation. Minimized operating torque ,energy saving.
3. Excellent sealing performance with no leakage. Long service life.
4. Wide selection of materials ,applicable for various media..
5. Flow curve tending to straight line. Excellent regulation performance.
DN | Hose ID | Wire OD | Hose OD | Working Pressure | Testing Pressure | Burst Pressure | Minimum bend radius | Weight |
mm | mm | mm | Mpa | Mpa | Mpa | mm | Kg | |
6.3 | 6.3±0.8 | 11.4±0.8 | 13.2±1 | 20 | 40 | 60 | 100 | 0.32 |
8 | 8±0.8 | 13±0.8 | 14.8±1 | 18 | 36 | 54 | 115 | 0.38 |
10 | 10±0.8 | 15.4±0.8 | 17.2±1 | 16 | 32 | 48 | 130 | 0.46 |
13 | 13±0.8 | 18.4±0.8 | 20.2±1 | 14 | 28 | 42 | 180 | 0.57 |
16 | 16±0.8 | 21.4±0.8 | 23.4±1 | 12 | 24 | 36 | 205 | 0.65 |
19 | 19±0.8 | 24.6±0.8 | 26.6±1 | 10 | 20 | 30 | 240 | 0.79 |
22 | 22±1 | 28.3±0.8 | 31.3±1 | 9 | 18 | 27 | 280 | 0.9 |
25 | 25±1 | 31.5±0.8 | 34.2±1 | 8 | 16 | 24 | 300 | 1.02 |
32 | 32±1 | 39±0.8 | 43±1 | 6 | 12 | 18 | 420 | 1.31 |
38 | 38±1 | 46±0.8 | 50±1 | 5 | 10 | 15 | 500 | 1.44 |
45 | 45±1 | 53±0.8 | 57±1 | 5 | 10 | 15 | 560 | 1.73 |
51 | 51±1 | 59±0.8 | 62.5±1 | 4 | 8 | 12 | 630 | 1.95 |
64 | 64±1.5 | 72±1.5 | 76±1.5 | 3 | 6 | 9 | 770 | 2.63 |
76 | 76±1.5 | 85±1.5 | 89±1.5 | 2.5 | 5 | 7.5 | 930 | 3.42 |
89 | 89±1.5 | 98±1.5 | 103±1.5 | 1.8 | 3.6 | 5.4 | 1100 | 4.1 |
102 | 102±1.5 | 113±1.5 | 117±1.5 | 2.8 | 5.6 | 8.4 | 1250 | 5.6 |
127 | 127±1.5 | 139±2 | 144±2 | 2.2 | 4.4 | 6.6 | 1400 | 8 |
152 | 152±1.5 | 165.5±2 | 169±2 | 1.6 | 3.2 | 4.8 | 1500 | 10 |
- Q: What is the difference between the precast beam of the bridge and the method of pulling out the rubber tube after pouring the concrete? What's the difference between design and calculation?
- Corrugated pipe is included in the design of the amount of engineering, the role is: reserved strand space. Its length is calculated when the work length of the steel strand.
- Q: What's the detailed size of hose connection for shower?
- First, take a bath with hot water, sweat pores, body dirt with sweat excreted; second, hot water to make the blood flow smoothly, promote the The new supersedes the old. refreshing,; third, for a hot bath and systemic vascular dilatation, and because of a cold bath and contraction. Such a contraction of blood vessels, enhanced flexibility, it is difficult to harden, blood pressure is not high, the old can prevent stroke.
- Q: What does the letter of the high-pressure tubing connector mean?
- Abnormal vibration of high pressure oil pipe and abnormal vibration of high pressure tubing joint lead to oil spill. It is a complicated problem. becauseThe high-pressure oil pipe is connected with a high-pressure oil pump and an injection machine, and belongs to the fuel injection system, and the function is very important. High pressure tubing canUnder high pressure of up to 150MPa, abnormal vibration can cause great loss, but also existsA great fire hazard. To troubleshoot, the injector valve is opened and closed at work to allow the high-pressure tubing to be producedStrong high frequency vibration, which is one of the important causes of damage to high pressure tubing.
- Q: Can the rubber hose for the LPG cooker and gas cooker be general?
- However, attention should be paid to the isolation of fire sources during storage and transportation, avoiding the exposure of sharp instruments and more corrosive chemicals, and avoiding prolonged storage in daylight.
- Q: The principle of the common bicycle valve
- An elastic thin edge hose is placed below to form the whole of the core. In fact, it is a one-way valve. When inflating the bicycle tyre, the compressed air in the air pump enters the valve core from the hollow part, and the elastic rubber tube is top, and the air enters the tyre.
- Q: How do the automobile rubber hoses combine with the quick couplings?
- The blue fast joint with fluorine is corresponding to the pressure, and the red fast joint with fluorine is corresponding to the high voltage
- Q: Is the rubber pipe joint installed in the middle of the pipe and pump to absorb the shock?
- According to the pumping station environment, the noise source is not close to the pump house for sound insulation treatment, the noise of the pumping room will be taken sound absorption / sound insulation treatment, doors and windows should do sound insulation treatment, and so on.
- Q: What material is used in the gas pipeline to reduce the wastage?
- The rubber tube industry in our country has been developed for 50 years, and its application is very extensive. As with other gas pipes, rubber tube has the properties of corrosion resistance, high temperature resistance, but its service life compared to other types of pipeline is much shorter, so in our country, the rubber tube has been rarely used in gas transportation in the.
- Q: The difference between silicone tube and rubber tube
- The main performance of the rubber tube: rubber tube is non-toxic, environmental protection, physical inertia, UV resistance, ozone resistance, resistance to high temperature (-8 to 300), high transparency, strong resilience, resistant to compression permanent deformation, oil resistance, impact resistance, acid and alkali resistance, wear resistance, flame resistance, voltage, conductive properties.Scope of application: supporting electrical appliances, electronics, furniture, equipment, toys, hardware, medical equipment, sporting goods, audio, lighting, machinery, automobile and other industries.
- Q: Do you know the inner diameter of the hose for household shower hose is the same? Can different brands of shower and hose mix?
- Yes, it's easy to have this problem with sprinkler tubes. Because the hose and shower head inside and outside the effective length of the difference between the thread is too large, resulting in gaskets did not play a role in sealing, multi pad 1-2 pads can be, the gasket can be purchased at the hardware store to buy
Send your message to us
Wire Braided Hydraulic Hose High PressureDN23
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 80000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
