Wire Braided Hydraulic Hose High Pressure DN25
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 80000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Wire Braided Hydraulic Hose
Construction: this hose shall consist of an inner tube of oil resistant synthetic rubber, a single steel wire braid reinforcement, and an oil and weather resistant synthetic rubber cover.
Applications: this section covers hose for use with petroleum
Temperature range: -40℃ to 100℃
DN | Hose ID | Wire OD | Hose OD | Working Pressure | Testing Pressure | Burst Pressure | Minimum bend radius | Weight |
mm | mm | mm | Mpa | Mpa | Mpa | mm | Kg | |
6.3 | 6.3±0.8 | 11.4±0.8 | 13.2±1 | 20 | 40 | 60 | 100 | 0.32 |
8 | 8±0.8 | 13±0.8 | 14.8±1 | 18 | 36 | 54 | 115 | 0.38 |
10 | 10±0.8 | 15.4±0.8 | 17.2±1 | 16 | 32 | 48 | 130 | 0.46 |
13 | 13±0.8 | 18.4±0.8 | 20.2±1 | 14 | 28 | 42 | 180 | 0.57 |
16 | 16±0.8 | 21.4±0.8 | 23.4±1 | 12 | 24 | 36 | 205 | 0.65 |
19 | 19±0.8 | 24.6±0.8 | 26.6±1 | 10 | 20 | 30 | 240 | 0.79 |
22 | 22±1 | 28.3±0.8 | 31.3±1 | 9 | 18 | 27 | 280 | 0.9 |
25 | 25±1 | 31.5±0.8 | 34.2±1 | 8 | 16 | 24 | 300 | 1.02 |
32 | 32±1 | 39±0.8 | 43±1 | 6 | 12 | 18 | 420 | 1.31 |
38 | 38±1 | 46±0.8 | 50±1 | 5 | 10 | 15 | 500 | 1.44 |
45 | 45±1 | 53±0.8 | 57±1 | 5 | 10 | 15 | 560 | 1.73 |
51 | 51±1 | 59±0.8 | 62.5±1 | 4 | 8 | 12 | 630 | 1.95 |
64 | 64±1.5 | 72±1.5 | 76±1.5 | 3 | 6 | 9 | 770 | 2.63 |
76 | 76±1.5 | 85±1.5 | 89±1.5 | 2.5 | 5 | 7.5 | 930 | 3.42 |
89 | 89±1.5 | 98±1.5 | 103±1.5 | 1.8 | 3.6 | 5.4 | 1100 | 4.1 |
102 | 102±1.5 | 113±1.5 | 117±1.5 | 2.8 | 5.6 | 8.4 | 1250 | 5.6 |
127 | 127±1.5 | 139±2 | 144±2 | 2.2 | 4.4 | 6.6 | 1400 | 8 |
152 | 152±1.5 | 165.5±2 | 169±2 | 1.6 | 3.2 | 4.8 | 1500 | 10 |
Inner tube: oil resistant synthetic rubber
Reinforcement: double high tensile steel wire braid
Cover: oil, abrasion and weather resistant synthetic rubber
Working temperature: -40-+100 temperature.
Applications: Hose range suitable to carry hydraulic fluids such as glycol, mineral oils, fuels, lubrication, emulsion and hydrocarbons etc. It is used for low-medium pressure hydraulic systems in industry and agriculture.
Resistance to ozone and aging,Acid and alkali resistant,Ozone test 72 hours with no cracks.
Its products widely used in coal mine,petroleum,engineering machinery,shipping,machine tool equipment,hydraulic,electric power,building,metallurgy,agricultural machinery,etc.
- Q: What should I pay attention to when rubber tube is in storage?
- Storage should be as follows: (1) should be stored in a ventilated and dry environment, the relative humidity of the air is 50% ~ 80%. (2) should be stored in non corrosive media, and away from the heat source, the temperature is about 5 degrees Celsius conditions. (3) packing should be kept as far as possible without box stacking.
- Q: There are several ways to connect the built-in rubber stop
- The built-in rubber sealing belt shall be an embedded rubber water stop belt, which is also called a buried rubber water stop or a middle rubber water stop belt.
- Q: What's the detailed size of hose connection for shower?
- Hot and cold bath: take a bath with hot water before going to bed every day. The temperature of the water is within the limits of the body's tolerance. After washing, sleep in hot water for 15 minutes. After bathing was out of a sweat, after 3~4 minutes, and then into a basin of cold water or cold shower. Note that the hot and cold bath must be "hot before cold."".
- Q: The engine cylinder head cover behind the drop rubber tube what reason (Xichai 490 engine) (note the valve chamber cover tube)
- The valve chamber of the engine cylinder head cover counterclockwise with 8~10 open wrench counterclockwise unscrew rocker screw. Place the piston at the top dead center, turn the rocker head wire clockwise until the hand can not be moved, then back half a circle, then lock the nut.
- Q: Is the electric water heater well connected with the metal hose?
- For electric water heater, now the industry is required to use PPR pipe to its inlet and outlet for welding, on the one hand, long service life, can effectively prevent the water heater inlet and outlet leakage;
- Q: What are the matters that should be paid attention to when installing rubber hose joint in water pump?
- Installation notes:?1, Shanghai rubber pipe joint non super displacement limit at the time of installation;?, 2 installation bolts to be symmetric, gradually tightening pressure, to prevent local leakage;?3, flat, suspended, vertical installation of rubber pipe joint, actual axial displacement pressure rubber tube joints should be smaller than the pipe support, otherwise should install anti pull off device to prevent work pressure;?4, rubber pipe joints should be away from heat, ozone, no strong radiation light. Exposure and use of media that do not meet the requirements of the product;?5, rubber pipe joint in the transportation, loading and unloading, installation, no sharp instruments across the surface of the sealing surface;
- Q: How do you remove the burrs on the rubber joint quickly?
- Frozen deburring machine is a kind of ultra low temperature using liquid nitrogen to make rubber, plastic products, zinc alloy burr occurs rapidly embrittlement, and under this condition, the burr of high-speed jet impinging particles of frozen products, so as to achieve both high quality and high efficiency removal products of burr, and keep possession the product itself does not change. The utility model can greatly improve the deburring precision of products, and has a high degree of intensification.
- Q: Do you know the inner diameter of the hose for household shower hose is the same? Can different brands of shower and hose mix?
- Yes, it's easy to have this problem with sprinkler tubes. Because the hose and shower head inside and outside the effective length of the difference between the thread is too large, resulting in gaskets did not play a role in sealing, multi pad 1-2 pads can be, the gasket can be purchased at the hardware store to buy
- Q: What is the high and low pressure circuit of diesel engine?
- Low pressure means the fuel tank to the big pump (directly driven by the engine). High pressure means the large pump to the injector
- Q: Do you need a hose connection to connect the ventilation pipe to the exhaust fan? Under what circumstances? Under what circumstances?
- Ventilation ducts and exhaust fans are for people or things, and the noise of vibration is unbearable for people or things.
Send your message to us
Wire Braided Hydraulic Hose High Pressure DN25
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 80000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
