WCDMA 2100MHz 3G Single Band cellphone signal booster repeater
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 5000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
![Application photo](https://file2.okorder.com/attach/2015/02/10/e8979811b85ea18d7bed92c42ce3dcba.jpg)
A cheap and immediate solution that would allow them have clear phone calls or higher speed broad band.
No more dropped calls ! No more poor reception !
No more runing to the windows or going outside to talk on your mobile phone !
Now you can reach everywhere with signal boosters!
2. Frequency bandwidth of 2100MHZ.
4. Full-duplex mode (improvement of out coming and incoming )signal.
5. Low power consumption and avoid to interference to BTS.
6. LED indicate and judge to signal level of uplink and downlink.
7. Compatibility with CE and RoHS standards .
8. Supports up to (30) users / calls simultaneously.
Humidity: 5-95%
1. Warranty covers replacement within 12 months.
2. All returns must have an RMA number before they are returned to us. If product is received without an RMA number
it will not be processed.
3. You must place the item(s) including all accessories to be returned in protective packaging (shipping box) with bubble
wrap and make sure that the item(s) do not shake or rattle. Items that are sent in envelopes and incorrect shipping
containers will be refused and returned at your expense.
![WCDMA 2100MHz 3G Single Band cellphone signal booster repeater](https://file2.okorder.com/attach/2014/09/30/5b7d501b3a0c3855ce6c2b104c7a96c0.jpg)
- Q:How is the EDUP2930 repeater relay mode set up?
- In addition, consider the following installation techniques:1. install the relay first in a very good signal position. In order for repeaters to work properly, doing so can greatly reduce the problem.2. upgrade the firmware of the repeater. Before the installation process, check that your repeater has the latest firmware version.3. configure the IP address. Make sure that the address of the repeater is unique and that it belongs to the IP address range that the wireless network connection can confirm. In most cases, the default IP address can be used, but you need to check the existing access point to confirm it.4. configure SSID. To set it exactly the same as the SSID on the existing network. If this step is not made, the repeater will never work unless the repeater fails, and it automatically scans the neighboring access points, automatically configuring this configuration for the user.5. configure radio frequency channels. The user needs to set up radio frequency on the repeater so that it matches the settings on the existing access point. This is similar to that of SSID. If the channel is set differently from the access point, the repeater will not work properly.
- Q:What does the subway rep repeater mean?
- The function repeater (Repeater) works at the physical layer of OSI, the center of all nodes on the LAN. Its function is to amplify the signal, compensate the signal attenuation, and support long distance communication.The advantage extends the communication distance, but the cost is to increase some storage and forwarding delay.
- Q:Is wireless router directly plugged into the Internet?
- Draw a cable from the cat, connected to the wireless router, you can use the settings
- Q:The role of field bus PROFIBUS DP/FMS isolation repeater is also discussed
- As far as DP is concerned, a repeater must be added every 32 DP devices according to specifications. The relay acts as follows1, photoelectric isolation signal, 2, can change the topology (if necessary, can produce a tree branch) 3, cut and cut terminal resistance4, to enhance the signal, optimize the waveform and extend the communication distance
- Q:Is the bus relay fiber interface integrated with the bus repeater?
- Optical fibers use optical pulses to transmit information along the optical line, instead of using electrical impulses to transmit information along the cable. At one end of the system is the transmitter, the starting point of the information to the fiber line. The received electronic pulse information of the transmitter is derived from the copper wire cable, and then the information is processed and converted into an equivalent coded optical pulse. A light emitting diode or an injection laser is used to generate an optical pulse, and a lens is used to focus the light pulses into the optical fiber medium so that the light pulses are transmitted along the line in the optical fiber medium. The total internal reflection principle shows that the optical pulse easily eye optical line movement, optical principle of total internal reflection shows that when the incident angle exceeds the critical value, the light will not overflow from the glass; on the contrary, the fiber will be reflected back to the glass if the above do not want to see, look at this: is by resending the data signal or forward, to expand the network transmission distance to generate signals (i.e., amplifying and shaping of the original signal). Principle: a repeater is a device for connecting network lines, often used for two-way forwarding of physical signals between two network nodes. The repeater is the most simple network interconnection equipment, mainly to complete the physical layer, is responsible for the physical layer of two nodes according to a transmission of information, copy, adjust and complete the signal amplification function, in order to prolong the network length.
- Q:Repeater! Plug in, mobile phone search can not signal why?
- Next is whether or not you are connected to the repeater networkFinally, check to see if your repeater is working properly. Normally, two lights are onNot really. You can choose to reset it and change it to another place
- Q:Millet router Mini how to enter after changing relay
- Working mode: has two working modes, the wired mode we can choose ordinary router mode, not only for the wired network and wireless network users, the relay mode, Meng Meng da.Just started the relay mode, will automatically scan the router around the other router signal, Sao wait for a moment to complete the scan.
- Q:About repeaters and common twisted pair problems
- The function of the repeater is to regenerate and transmit the received signal so as to increase the distance of signal transmission. It is the simplest network interconnection device that connects two or more network segments of the same network.
- Q:Is the network repeater and the main route a signal or two signal?
- Can be set to a signal, can also be different.
- Q:Why is network repeater so fire?
- Or you can buy a router to do the relay, the cost is high. You can also buy a router to connect the living room and bedroom with the cable, which is more troublesome.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
WCDMA 2100MHz 3G Single Band cellphone signal booster repeater
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 5000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords