wcb globe valve DN100

Inquire Now

OKorder Service Pledge

Quality Product, Order Online Tracking, Timely Delivery

OKorder Financial Service

Credit Rating, Credit Services, Credit Purchasing

You Might Also Like

size range	1/2"~10"
working pressure	PN1.6~6.4Mpa, 150~300LB, 10K, 20K
suitable temperature	-29~150°C
Suitable medium	water, gas, oil
	CF8(304): suitable for nitric acid
	CF8M(316): suitable for acetic acid
Technical Standard
Design Standard	ASEB16.5a
Facto to face Std	ASMEB16.10
Pressure-Temperature Rating	ASEB16.34
End-Flange Std	ASEB16.5a
Test Standard	API598, ISO5208
Material	WCB, CF8(304), CF8M(316)
Operation	Manaul, Pneumatic, Electric

Q: What is the difference between the model z81x-16q and z81x-16c of the groove gate valve?: Not 16qIs 16p, the former body is stainless steel, and the latter body is carbon steel

Q: What is gate valve (with force transfer joint)?: Flange valve is equipped with a force expansion joints, easy installation

Q: Gate valve DN65 what does that mean?: DN65 indicates that the valve bore is 65CM.The gate (gate valve) is a headstock ram, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed doors, discomfort pumpsparameters vary, usually 5 degrees is not high, medium temperature is 2 degrees 52'. To improve its manufacturability, make up for the deviation of the angle of the sealing surface during processing. This gate is called an elastic ram.

Q: Does the relief valve have a gate valve?: The pressure reducing valve group is composed of an adjustable pressure reducing valve, a pressure gauge, a copper valve, a Y filter, a rubber soft joint, a spring pressure gauge, a pressure gauge, an air valve, a pressure gauge and a bent pipe.

Q: Why does the fire hydrant box in the air defense area need to be added with gate valves?: Code for design of basement for civil air defence GB50038The installation and installation of the protective valve on the water supply line of the 6.2.13 air defense basement shall comply with the following requirements:OneWhen the water supply pipe from the entrance into, should be set up in the inner protective sealing door;

Q: What is gate well?: Explanation:Valve wells also called valve wells, underground pipelines and underground pipelines (such as tap water, oil, natural gas pipeline valve etc.) in order to facilitate the opening and closing part of network operation or overhaul when needed, a pit is a similar small room (or well), the valve installation in the pit where, for regular inspection, cleaning and dredging pipeline, to prevent the blockage of the pipeline project. The pit is called a well. There are valves, wells must have valves, but there is not necessarily a valve valve wells.

Q: Gate valve z11h/y-16 what does that mean?: Product Name: internal thread gate valveItem number: Z11HProduct specification: DN15-50Product pressure: 1.6MPa-2.5MPaMaterial: cast iron, cast steel, stainless steelInternal thread gate valve nominal pressure 2.5Mpa, applicable temperature range -20-232-350, applicable medium: water, oil, gas and certain corrosive liquid (W.O.G), thread type G.NPT.BSPT.BSP.DIN259/2999.

Q: Gate valve z41t what does that mean?: According to the provisions of the JB/T 308-2004 valve type programming method:Z = gate valve4 = connection form: flangeT = sealing surface material: copper alloy

Q: What are the types and product categories of knife gate valves?: Types and classification of knife gate valves:PZ73H, PZ73F, PZ73Y manual knife gate valve: manual drive, clamp connections, rod parallel rigid single gate and valve seat sealing surface is made of hard alloy, Teflon or stainless steel body processing, nominal pressure.2PN10~16, the valve body material for carbon steel (PZ73H-10C/16C), stainless steel (PZ73F-10P/16P PZ73Y-10P/16P), with the function of slag gate valve.

Q: The legend of gate valve and stop valve: Compared with the cut-off valve, the main advantage is that the flow resistance is small, the flow resistance coefficient of ordinary gate valve is about 0.08~0.12, while the ordinary cut-off valve resistance coefficient is about 3.5~4.5. Opening, closing force is small, the medium can flow in two directions. The disadvantage is that the structure is complex and the height is large. The sealing surface is easy to wear. The sealing surface of the valve must be forced to close the valve to achieve sealing, in the same caliber, work pressure and the same drive device, the drive valve torque is 2.5~3.5 times the gate valve. This point should be noticed when adjusting the torque control mechanism of the electric valve.The sealing surface of the stop valve contacts each other only when the valve is completely closed, and the relative sliding amount between the valve core and the sealing surface is very small, so that the wear of the sealing cover is very small. The sealing surface of the valve cover, mostly due to the spool and sealing surface before the debris, or because of the closed state is not tight, causing the medium of high-speed erosion caused by.

Send your message to us

*Email

*TEL

*Quantity

*Unit