VIP Micropores Insulation Fireproof Board for Fuel Cells (SOFC)
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Quick Details for Micropores Insulation Fireproof Board for Fuel Cells (SOFC)
Place of Origin: | China | Brand Name: | CMAX | Model Number: | micropores insulation board |
Material: | PTFE | Thickness: | 3mm-100mm, 3mm-100mm | Size: | Length & Width: 500mm*500mm,600mm*600mm,1000mm*1000mm,1200mm*1200mm |
Certificate: | ISO9001:2000,ISO9001:2008 | Coating: | alumina foil/ glass fiber cloth | Length & Width: | 500mm*500mm,600mm*600mm,1000mm*1000mm,1200mm*1200mm |
Grade: | A grade (100% virgin), B grade (50% virgin), C grade ( 30% virgin) | Polytetrafluoroethylene: | PTFE,also named TEFLON. | Characteristics: | includes molded sheet and skived sheet |
Applications: | used within -180℃~+260℃ | Delivery: | 7 days after the receipt of the deposit | Packaging: | Pallet or according to customer requirement |
Packaging & Delivery
Packaging Details: | 1.Paper-carton with polybag inside. 2.Paper-carton with polybag inside snd pallet. 3.Paper-carton with polybag inside and shrinkable film and strapped. |
Delivery Detail: | 25 Days |
1.Calcium silicate fire-proof board / pipe/ brick / materials for aluminium/Power/Cement/Nonferrous/steel industry.
It is mixed with Xonotlite and reinforced glass fibre with high service temp. (1050 celsius),good heat insulation, low bulk density, high strength, good durability and so on.
Product characteristics:
Good durability, can bear high temperature within the limit of continuous heat load,
Low thermal conductivity, in the whole range are used with unmatched adiabatic performance.
Light weight, high strength. It is the highest in these hard thermal insulation products.
Better durability, use for a long time without powder.
Construction with ordinary carpenter applicability, tools can be optional cut products.
Used safety, hygiene. Excluding asbestos, sulfur, chlorine such poisonous substances.
Fear water, but after drying also can be used.
2.Pictures of micropores insulation board
3. Applications of micropores insulation board
A. Cement industry: preheaters and cyclone separators, decomposition kiln,tertiary air duct and cooler .
B. Nonferrous metallurygical industry: aluminum power calciner and electrolysis groove.
C. Petrochemical industry: Splitting furnace,catalytic cracking furnace,petroleumpipeline,underground heat-flooding.
D.Metallurgical industry(steel plant): hot-rolling heat furnace,cool-rolling mill set,RH vacuum degassing furnace , smelters,hot deformation and heat treatment plants.
E. Power plant:preheat stove ,pipe.
F.Glass industry:melting furnace and recuperator,annealing furnace and cooling channels.
4. Technical of micropores insulation board
5.More Products To Choose
Our Services
1) High performance cost ratio with steady quality
2) OEM service and Prompt Delivery
3) The fast speed of reply your email and can make quotation sheet just for you.
4) Can provide free sample, only need you bear the sample fee.
5) Supply good after-sales service, we will follow-up the situation after using, if have problems,we will find out the
reason and deal with positively.
Other insulation products:
Welcome to visit our factory!!!
- Q: I ask, our home is the top floor, the summer is too hot, the walls and roof in addition to the use of insulation board, posted their own kind of tin foil, will not be useful?
- The traditional ceiling color steel tile composite composite 10 cm thick white polystyrene foam insulation board, the insulation effect is not very good, this is because the thermal conductivity of polystyrene foam board is relatively high (thermal conductivity 0.035W / (m · K) above), plus There is a gap between the foam board and the board, the temperature is very serious, the comprehensive thermal conductivity is generally higher than 0.05. The new polyurethane spray insulation material can be directly sprayed on the color steel tile, the thermal conductivity is low, only 0.022-0.024W / (m · K), insulation effect is 2-3 times the polystyrene board, is the insulation of all insulation materials Especially excellent material. Because in the construction of the use of direct spray molding technology, so that the polyurethane foam layer is not the overall burden of sewing the body to form a complete impermeability, fundamentally put an end to the possible deep Sex. Which play a preservative effect.
- Q: Is the thermal conductivity of the vacuum insulated plate used to protect the hot plate method?
- Supplementary feifei answer: 1.10kV to the ground safety distance (vertical) is 6 meters, if the 10kV live line below the minimum safe distance (vertical) is 3 meters, "power facilities protection regulations" provides strict construction, housing construction , If it is temporary construction, in the construction should contact the line unit, you can let them send on-site monitoring construction, but must ensure that the safety distance of 3 meters, than the steel pipe, scaffolding and other metal parts in the construction process should prevent the distance from the live line Excessive discharge causes electric shock. 2. If the use of crane construction, according to the "national shield shield uncle 墉 矫 堕 scared scared off the power grid company safety work procedures" provisions in the 5 meters away, to prevent the arm swing accidentally hit the live conductor. If the 10kV line around (both sides) construction, the safety distance and the vertical distance of the same provisions, if the lifting height beyond the live wire should be taken when the wind caused by the swing caused by electric shock 3. "Construction site temporary safety technical specifications" and " Power facilities protection regulations implementation details "provides only the moving objects, such as wires issued trees, houses and other buildings.
- Q: What brand of refrigerator is using a vacuum insulation board? What kind of insulation board is better? More
- What do you mean if you want to get your own steel pipe fastener? Which city is in the city?
- Q: What is the best insulation material? To be waterproof.
- Under normal circumstances, the steel structure of the plant panel can be a single laminated steel plate, double laminated steel plate, composite color plate. Single-layer steel plate used for simple plant or temporary plant roof, this material is affordable, but the insulation effect is poor, easy to leak. Double laminated steel plate effect will be better. Composite color steel plate for the use of insulation materials sandwich practice, insulation and noise effects are very good, but as a roof, the national standard requires sandwich material must be flame retardant or non-combustible materials.
- Q: External wall insulation material which is good, external wall insulation materials
- Indoor insulation material that the best, fire, environmental protection, good insulation effect? ??Glass fiber. Good insulation. Glass fiber cotton with numerous fine gas holes, fibers arranged irregularly arranged, heat conduction breakdown of 0.03w / cm.k, is an excellent insulation material; . with non-flammable. Glass fiber cotton will not burn, no deformation, no embrittlement, can withstand 700 degrees of high temperature, the combustion performance to A1; . environmental non-toxic. As the glass fiber cotton in the manufacturing process does not add any adhesive, so there is no smell, high temperature will not be distributed when the toxic, pungent smell, smell, etc .; . high insulation. As the glass fiber cotton used in the raw material is glass, non-conductive, so it has a very high insulation; . corrosion resistance. Glass fiber is not afraid of strong acid, with a strong corrosion resistance, even if the use of long time will not reduce its functional characteristics; . good recovery Glass fiber contains numerous fixed cavitation, with excellent recovery, not afraid of any shock, tensile strength are more than 1.0kg; . do not want to light field scrambled decanoate containing mutual water. The moisture absorption of glass fibers is usually close to zero, do not worry about there will be water swelling caused by wet cracking of the situation. I hope my answer can help you.
Send your message to us
VIP Micropores Insulation Fireproof Board for Fuel Cells (SOFC)
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords