Ceramic Fiber Thermal Insulation Paper
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
low thermal conductivity but high thermal contact resistance, outstanding uniformity, fast outgassing rate but low gas emission
Cryogenic Fiberglass Insulation Paper
Our cryogenic micro fiberglass insulation paper is fabricated with selected superfine fiberglass which is generally laminated with aluminum foil.
It shares the advantage of low thermal conductivity but high thermal contact resistance, outstanding uniformity, fast outgassing rate but low gas emission under vacuum conditions, light gram-weight and wide applicable working temperature range (269°C~500°C).
It is the top selected insulation materials applicable for cryogenic liquid storage & mobile containers and pipeline systems for liquid oxygen, nitrogen, hydrogen, helium, argon, LNG and etc.
Product Performance Index
Performance | Unit | Index |
Weight | g/m2 | 11±1 |
Thickness | mm | ≤0.06 |
Width | mm | 40-2400 |
Tensile Strength | KN/m | ≥0.03 |
Moisture Content | % | ≤1 |
Thermal Conductivity | w/mk | ≤0.00035 |
- Q: Which is the best insulation effect of ceramic fiber paper and XPE insulation film?
- The insulation effect depends on the temperature. The same material, the temperature is different, thermal conductivity is not the same. At low temperatures, I suggest you use XPE. Ceramic fiber paper is generally used for hundreds of degrees or even thousands of degrees of high temperature.
- Q: The condition of ceramic glass fiber at high temperature
- Generally speaking, the glass fiber has low temperature resistance, and the biggest use is glass fiber reinforced plastic; the ceramic fiber has higher temperature resistance, and the biggest purpose is to be used as the structural material of refractory bricks, but generally it does not form fabric;
- Q: How are ceramic fiber papers attached to the interior wall?
- There are two ways to apply ceramic fiber paper to the wall. The first is to buy ceramic fiber paper with single-sided adhesive tape, and the second is to paste it directly with double-sided adhesive tape. From Ji'nan dragon hot ceramics limited liability company, refractory materials chapter
- Q: Do ceramic fiber paper smell at high temperature?
- Ceramic fiber paper is made from high purity ceramic fibers, with a small amount of scientifically selected and tightly controlled binders, and binders will evaporate during use. If the ceramic fiber paper in a high temperature environment, the bond will gradually volatile, volatile initial will have a certain odor, and so volatile, there will be no flavor. The binder is a series of organic rubber, and the smell remains as little as possible.
- Q: Where is the best packing area for ceramic fibers?
- Compared with asbestos textiles, ceramic fiber textiles have the following advantages:1) the continuous use temperature can reach 1000 DEG C, and the service temperature can reach 1260 DEG C for a short time.2) has good acid and alkali corrosion resistance and aluminum, zinc and other molten metal melting ability.3) good high temperature strength and heat insulation performance (refer to physical and chemical indexes).4) ceramic fiber cloth, band, packing and other products with non alkali glass fiber yarn as strengthening material have higher insulation and high temperature electrical insulation than glass fiber.5) non-toxic, harmless and odorless.
- Q: What is the essential difference between the standard of ceramic fiber and ordinary aluminium silicate?
- Ceramic fiber products (aluminum silicate fiber products) (1) ceramic fiber products (aluminum silicate fiber products) varieties and properties of ceramic fiber products (aluminum silicate fiber products) is the most important indicator of fiber diameter and thermal stability. Al2O3SiO2 fiber is commonly used in ceramic industry. It is divided into different application range according to the content of Al2O3, and Cr2O3 material is introduced into it to improve its refractory and oxidation resistance. Generally high alumina content, iron oxide and other impurities of low fiber products are pure white, the introduction of chromium oxide fiber is sold with milk yellow tone color. The average diameter of ceramic fiber products (aluminium silicate fiber products) is 22 - 33 microns.
- Q: What can I do to get the clothes off the ceramic fiber?
- Remove pen marks from clothes easilyFirst of all, the alcohol evenly sprinkled on the pen printed on the pen, alcohol should be used at a concentration of not less than 75% of the alcohol used in medicine. Remember to put on this side of the garment that has been poured down. Do not touch other surfaces of the garment. Otherwise, the color of the pen may be stained with other parts of the garment.Prepare most of the water, and then pour two full bottle of bleach water in the water, stirring, and a little washing powder, so that the laundry powder can be fully dissolved in water. Soak your clothes completely in water for twenty minutes. Washing clothes, there is no mark!Clothes stained with pens, ball pen marks, there is another way to solve: that is, do not rush to the clothes into the water, but first wash with gasoline, washed parts of the re wash.
- Q: What are the features of ceramic fiber gaskets?
- 1) the continuous use temperature can reach 1000 DEG C, and the service temperature can reach 1260 DEG C for a short time.2) has good acid and alkali corrosion resistance and aluminum, zinc and other molten metal melting ability.3) good high temperature strength and heat insulation performance (refer to physical and chemical indexes).4) having a higher level of electrical insulation and high temperature electrical insulation than glass fibers.5) non-toxic, harmless and odorless.
- Q: Carbon fiber and aluminum alloy material in the end what is the difference?
- The advantages of carbon fiber are light, excellent corrosion resistance, good elasticity and outstanding vibration absorption effect. The disadvantage is that the shock resistance is poor and the high temperature resistance is poor. It is used in a lot of planes, boats, sporting goods, such as bicycles, tennis rackets and so on. But the price is much more expensive than aluminum alloy.
- Q: How high is the temperature resistance of the ceramic fiber gasket?
- Generally divided into standard type and high profile, the standard temperature of 1260 degrees to 1000 degrees of long-term use of high alumina long-term use of 1200 degrees.
Send your message to us
Ceramic Fiber Thermal Insulation Paper
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords